Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2302.04284 · Physical Review Applied

Low-Overhead Quantum Bus with Coupling Beyond the Nearest Neighbor via Mediated Effective Capacitance

Yariv Yanay, Charles Tahan

Published Aug 2, 2023• 0 citations
arXivHTMLPDF

Abstract

The design of easy-to-operate high-fidelity two-qubit gates remains an area of ongoing research. Many of the common schemes require dedicated control lines, while others are vulnerable to issues of frequency crowding. Here, we propose a scheme for coupling a chain of transmons acting as logical qubits via a quantum bus of auxiliary qubits. The auxiliary array is made of floating transmons and through the use of mediated interactions we generate effective capacitance between them beyond the nearest neighbor. Logical qubits are not directly coupled to each other but they can be coupled by bringing them closer in frequency to the far-detuned auxiliary arrays. This allows for tunable coupling between non-neighboring logical qubits and for the application of entangling gates to three or more qubits at once.

DOI
10.1103/physrevapplied.20.024006

Related papers

Mediated Interactions beyond the Nearest Neighbor in an Array of Superconducting Qubits

Yariv Yanay, Jochen Braumüller, Terry P. Orlando +3 more

We consider mediated interactions in an array of floating transmons, where each qubit capacitor consists of two superconducting pads galvanically isolated from ground. Each such pair contributes two quantum degrees of freedom, one of which is used as a qubit, while the other remains fixed. However, these extraneous modes can generate coupling between the qubit modes that extends beyond the nearest neighbor. We present a general formalism describing the formation of this coupling and calculate it for a one-dimensional chain of transmons. We show that the strength of coupling and its range (that is, the exponential falloff) can be tuned independently via circuit design to realize a continuum from nearest-neighbor-only interactions to interactions that extend across the length of the chain. We discuss how this coupling breaks integrability, allowing the system to locally equilibrate, and so enables exploration of quantum thermalization. We present designs with capacitance and microwave simulations showing that various interaction configurations can be achieved in realistic circuits. Such a coupling could be used in analog simulation of different quantum regimes or to increase connectivity in digital quantum systems. Thus the mechanism must also be taken into account in other types of qubits with extraneous modes.

arXiv:2110.01699•Physical Review Applied•Mar 25, 2022•15 citations

Long-Distance Transmon Coupler with cz-Gate Fidelity above 99.8 %

Fabian Marxer, Antti P. Vepsäläinen, Shan W. Jolin +36 more

Tunable coupling of superconducting qubits has been widely studied due to its importance for isolated gate operations in scalable quantum processor architectures.Here, we demonstrate a tunable qubit-qubit coupler based on a floating transmon device, which allows us to place qubits at least 2 mm apart from each other while maintaining over 50-MHz coupling between the coupler and the qubits.In the introduced tunable-coupler design, both the qubit-qubit and the qubit-coupler couplings are mediated by two waveguides instead of relying on direct capacitive couplings between the components, reducing the impact of the qubit-qubit distance on the couplings.This leaves space for each qubit to have an individual readout resonator and a Purcell filter, which is needed for fast high-fidelity readout.In addition, simulations show that the large qubit-qubit distance significantly lowers unwanted non-nearest-neighbor coupling and allows multiple control lines to cross over the structure with minimal crosstalk.Using the proposed flexible and scalable architecture, we demonstrate a controlled-Z gate with (99.81 ± 0.02)% fidelity.

arXiv:2208.09460•PRX Quantum•Feb 6, 2023•84 citations

Nonadiabatic holonomic quantum computation on coupled transmons with ancillaries

Tao Chen, Jiang Zhang, Zheng‐Yuan Xue

The physical implementation of holonomic quantum computation is challenging due to the needed complex controllable interactions in multilevel quantum systems. Here we propose to implement nonadiabatic holonomic quantum computation with conventional capacitive coupled superconducting transmon qubits. A universal set of holonomic gates is constructed with the help of the interaction with an auxiliary qubit rather than relying on delicate control over an auxiliary level of multilevel quantum systems. Explicitly, these quantum gates are realized by tunable interactions in an all-resonant way, which leads to high-fidelity gate operations. In this way, the distinct merit of our scheme is that we use only the lowest two levels of a transmon to form the qubit states. In addition, the auxiliary qubits are in their ground states before and after every gate operation, so that the holonomic gates can be constructed successively. Therefore, our scheme provides a promising method towards the practical realization of high-fidelity nonadiabatic holonomic quantum computation.

arXiv:1808.00299•Physical Review A•Nov 13, 2018•26 citations

Coherent errors in a superconducting six-qubit network with beyond-nearest-neighbor connectivity

Jay Deshmukh, Srijita Das, Binoy Nambiar +11 more

Enhancing qubit connectivity in quantum processors is an important milestone for more efficient implementation of algorithms and novel error-correction protocols. While all-to-all connectivity has been demonstrated in quantum processors based on ion traps and neutral atoms, the exploration of enhanced connectivity in the superconducting qubit architecture has been a more recent endeavor. Here, we demonstrate the operation of a network comprising six superconducting transmon qubits with a novel, beyond-nearest-neighbor connectivity. We use a circular ring resonator with six qubits placed on the periphery at 60 ∘ spacing and capacitively coupled to it in a three-dimensional circuit-QED architecture. The ring resonator acts as a two-path coupler between each pair of qubits, and we present results demonstrating that each qubit has finite coupling to three other qubits with negligible coupling to the remaining two qubits. In this architecture, with fixed-frequency qubits and always-on coupling, we benchmark the single-qubit and two-qubit gates using randomized benchmarking. We find that our gate fidelities are strongly affected by the enhanced connectivity. We characterize the spread in qubit frequencies due to cross-Kerr terms and quantify its detrimental effect on the performance of single- and two-qubit gates. Finally, we analyze the effect of the spectator qubits using numerical simulations and propose a path toward optimizing this system and achieving > 99 % two-qubit gate fidelities across all connected qubit pairs.

Physical Review Research•Jun 16, 2026•0 citations

Coherent Transmon-Charge Qubit Coupling Mediated by Virtual Photon Exchange in a High Impedance Resonator

Pasquale Scarlino, David J. van Woerkom, Udson C. Mendes +9 more

We explore the coupling of the charge degree of freedom of electrons confined in a GaAs/AlGaAs double quantum dot (DQD) to a superconducting transmon qubit in the circuit QED architecture. In this work, we realize a proof of concept experiment in which the coupling between a transmon qubit and a DQD qubit is mediated by virtual microwave photon excitations in a tunable high impedance SQUID array resonator, which acts as a quantum bus enabling long range coupling between dissimilar qubits. Our device hosts a DQD capacitively coupled to a SQUID array resonator, which in turn is coupled to a single island transmon. The device is further equipped with a flux line for fast control of the transmon frequency, and with a 50 Ω CPW resonator capacitively coupled to the transmon for readout. Realizing a well controlled interface between semiconductor and superconductor-based quantum computing architectures will allow to take full advantage of those two solid states quantum systems for hybrid-quantum processors and will enable the use of both charge and flux degrees of freedom in the same device. The methods and techniques developed in this work are expected to be transferable to other material systems.

Bulletin of the American Physical Society•Mar 8, 2018•0 citations

Parametrically Activated Entangling Gates Using Transmon Qubits

Sam Caldwell, Nicolas Didier, Colm A. Ryan +59 more

A central challenge in building a scalable quantum computer with superconducting qubits is the execution of high-fidelity two-qubit gates in the presence of many resonant elements. As more elements are added to the architecture, and as the multiplicity of their couplings grows, the design's frequency space becomes crowded, and performance suffers. The authors present a way to address this difficulty: selective activation of interactions between transmon qubits of fixed frequency and those of tunable frequency. This activation depends on both the amplitude and frequency of modulation, and using the amplitude as an additional condition for resonance alleviates frequency crowding.

arXiv:1706.06562•Physical Review Applied•Sep 24, 2018•214 citations
The design of easy-to-operate high-fidelity two-qubit gates remains an area of ongoing research. Many of the common schemes require dedicated control lines, while others are vulnerable to issues of frequency crowding. Here, we propose a scheme for coupling a chain of transmons acting as logical qubits via a quantum bus of auxiliary qubits. The auxiliary array is made of floating transmons and through the use of mediated interactions we generate effective capacitance between them beyond the nearest neighbor. Logical qubits are not directly coupled to each other but they can be coupled by bringing them closer in frequency to the far-detuned auxiliary arrays. This allows for tunable coupling between non-neighboring logical qubits and for the application of entangling gates to three or more qubits at once.
We consider mediated interactions in an array of floating transmons, where each qubit capacitor consists of two superconducting pads galvanically isolated from ground. Each such pair contributes two quantum degrees of freedom, one of which is used as a qubit, while the other remains fixed. However, these extraneous modes can generate coupling between the qubit modes that extends beyond the nearest neighbor. We present a general formalism describing the formation of this coupling and calculate it for a one-dimensional chain of transmons. We show that the strength of coupling and its range (that is, the exponential falloff) can be tuned independently via circuit design to realize a continuum from nearest-neighbor-only interactions to interactions that extend across the length of the chain. We discuss how this coupling breaks integrability, allowing the system to locally equilibrate, and so enables exploration of quantum thermalization. We present designs with capacitance and microwave simulations showing that various interaction configurations can be achieved in realistic circuits. Such a coupling could be used in analog simulation of different quantum regimes or to increase connectivity in digital quantum systems. Thus the mechanism must also be taken into account in other types of qubits with extraneous modes.
Tunable coupling of superconducting qubits has been widely studied due to its importance for isolated gate operations in scalable quantum processor architectures.Here, we demonstrate a tunable qubit-qubit coupler based on a floating transmon device, which allows us to place qubits at least 2 mm apart from each other while maintaining over 50-MHz coupling between the coupler and the qubits.In the introduced tunable-coupler design, both the qubit-qubit and the qubit-coupler couplings are mediated by two waveguides instead of relying on direct capacitive couplings between the components, reducing the impact of the qubit-qubit distance on the couplings.This leaves space for each qubit to have an individual readout resonator and a Purcell filter, which is needed for fast high-fidelity readout.In addition, simulations show that the large qubit-qubit distance significantly lowers unwanted non-nearest-neighbor coupling and allows multiple control lines to cross over the structure with minimal crosstalk.Using the proposed flexible and scalable architecture, we demonstrate a controlled-Z gate with (99.81 ± 0.02)% fidelity.
The physical implementation of holonomic quantum computation is challenging due to the needed complex controllable interactions in multilevel quantum systems. Here we propose to implement nonadiabatic holonomic quantum computation with conventional capacitive coupled superconducting transmon qubits. A universal set of holonomic gates is constructed with the help of the interaction with an auxiliary qubit rather than relying on delicate control over an auxiliary level of multilevel quantum systems. Explicitly, these quantum gates are realized by tunable interactions in an all-resonant way, which leads to high-fidelity gate operations. In this way, the distinct merit of our scheme is that we use only the lowest two levels of a transmon to form the qubit states. In addition, the auxiliary qubits are in their ground states before and after every gate operation, so that the holonomic gates can be constructed successively. Therefore, our scheme provides a promising method towards the practical realization of high-fidelity nonadiabatic holonomic quantum computation.
Enhancing qubit connectivity in quantum processors is an important milestone for more efficient implementation of algorithms and novel error-correction protocols. While all-to-all connectivity has been demonstrated in quantum processors based on ion traps and neutral atoms, the exploration of enhanced connectivity in the superconducting qubit architecture has been a more recent endeavor. Here, we demonstrate the operation of a network comprising six superconducting transmon qubits with a novel, beyond-nearest-neighbor connectivity. We use a circular ring resonator with six qubits placed on the periphery at 60 ∘ spacing and capacitively coupled to it in a three-dimensional circuit-QED architecture. The ring resonator acts as a two-path coupler between each pair of qubits, and we present results demonstrating that each qubit has finite coupling to three other qubits with negligible coupling to the remaining two qubits. In this architecture, with fixed-frequency qubits and always-on coupling, we benchmark the single-qubit and two-qubit gates using randomized benchmarking. We find that our gate fidelities are strongly affected by the enhanced connectivity. We characterize the spread in qubit frequencies due to cross-Kerr terms and quantify its detrimental effect on the performance of single- and two-qubit gates. Finally, we analyze the effect of the spectator qubits using numerical simulations and propose a path toward optimizing this system and achieving > 99 % two-qubit gate fidelities across all connected qubit pairs.
We explore the coupling of the charge degree of freedom of electrons confined in a GaAs/AlGaAs double quantum dot (DQD) to a superconducting transmon qubit in the circuit QED architecture. In this work, we realize a proof of concept experiment in which the coupling between a transmon qubit and a DQD qubit is mediated by virtual microwave photon excitations in a tunable high impedance SQUID array resonator, which acts as a quantum bus enabling long range coupling between dissimilar qubits. Our device hosts a DQD capacitively coupled to a SQUID array resonator, which in turn is coupled to a single island transmon. The device is further equipped with a flux line for fast control of the transmon frequency, and with a 50 Ω CPW resonator capacitively coupled to the transmon for readout. Realizing a well controlled interface between semiconductor and superconductor-based quantum computing architectures will allow to take full advantage of those two solid states quantum systems for hybrid-quantum processors and will enable the use of both charge and flux degrees of freedom in the same device. The methods and techniques developed in this work are expected to be transferable to other material systems.
A central challenge in building a scalable quantum computer with superconducting qubits is the execution of high-fidelity two-qubit gates in the presence of many resonant elements. As more elements are added to the architecture, and as the multiplicity of their couplings grows, the design's frequency space becomes crowded, and performance suffers. The authors present a way to address this difficulty: selective activation of interactions between transmon qubits of fixed frequency and those of tunable frequency. This activation depends on both the amplitude and frequency of modulation, and using the amplitude as an additional condition for resonance alleviates frequency crowding.