We propose a passive single-photon detector based on the bipolar thermoelectric effect occurring in tunnel junctions between two different superconductors thanks to spontaneous electron–hole symmetry breaking. Our superconducting thermoelectric detector (STED) converts a finite temperature difference caused by the absorption of a single photon into an open circuit thermovoltage. Designed with feasible parameters, our STED is able to reveal single photons of frequency ranging from ∼15 GHz to ∼150 PHz depending on the chosen design and materials. In particular, this detector is expected to show values of the signal-to-noise ratio SNR∼15 at ν = 50 GHz when operated at a temperature of 10 mK. Interestingly, this device can be viewed as a digital single-photon detector, since it generates an almost constant voltage VS for the full operation energies. Our STED can reveal single photons in a frequency range wider than four decades with the possibility to discern the energy of the incident photon by measuring the time persistence of the generated thermovoltage. Its broadband operation suggests that our STED could find practical applications in several fields of quantum science and technology, such as quantum computing, telecommunications, optoelectronics, THz spectroscopy, and astro-particle physics.
We propose a passive single-photon detector based on the bipolar thermoelectric effect occurring in tunnel junctions between two different superconductors thanks to spontaneous electron–hole symmetry breaking. Our superconducting thermoelectric detector (STED) converts a finite temperature difference caused by the absorption of a single photon into an open circuit thermovoltage. Designed with feasible parameters, our STED is able to reveal single photons of frequency ranging from ∼15 GHz to ∼150 PHz depending on the chosen design and materials. In particular, this detector is expected to show values of the signal-to-noise ratio SNR∼15 at ν = 50 GHz when operated at a temperature of 10 mK. Interestingly, this device can be viewed as a digital single-photon detector, since it generates an almost constant voltage VS for the full operation energies. Our STED can reveal single photons in a frequency range wider than four decades with the possibility to discern the energy of the incident photon by measuring the time persistence of the generated thermovoltage. Its broadband operation suggests that our STED could find practical applications in several fields of quantum science and technology, such as quantum computing, telecommunications, optoelectronics, THz spectroscopy, and astro-particle physics.
We present and theoretically analyze the performance of a nonlocal superconducting single-photon detector. The device operates due to the energy-to-phase conversion mechanism, where the energy of the absorbed single photon is transformed in a variation of the superconducting phase. Within this scope, the detector is designed in the form of a double-loop superconductor--normal-metal--superconductor (S-N-S) Josephson interferometer, where the detection occurs in a long S-N-S junction and the readout is operated by a short S-N-S junction. The variation of the superconducting phase across the readout junction is measured by recording the quasiparticle current flowing through a tunnel-coupled superconducting probe. By exploiting realistic geometry and materials, the detector is able to reveal single photons of frequency down to 10 GHz when operated at 10 mK. Furthermore, the device provides a value of the signal-to-noise ratio of up 104 in the range from 10 GHz to 10 THz by selection of the magnetic flux and the bias voltage. This device will hopefully find direct application as a single-photon detector in both basic science and quantum technology, while the energy-to-phase conversion mechanism could be the basis of nonlocal readout and memory architectures for superconducting qubits.
Superconducting tunnel junctions, which are also known as superconductor-insulator-superconductor (SIS) junctions, are widely used in coherent detection (heterodyne mixing) of electromagnetic radiation at millimeter and submillimeter wavelengths to achieve high spectral resolution (Δν/ν<10-6). With extremely low dark current and high quantum efficiency, superconducting tunnel junctions are also promising for THz photon detection. Besides the merit of high detection sensitivity, THz photon detectors with superconducting tunnel junctions can be operated at relatively high temperatures (above 0.3 K) and don't need rather complicated filtering systems by simply incorporating a superconducting resonant circuit with superconducting tunnel junctions. This paper mainly investigates the characteristics of THz photon detectors with Nb and NbN-based superconducting tunnel junctions. The MAR effect and associated shot noise are addressed. Some analytical and preliminary experimental results are presented.
We introduce a zero-bias superconducting voltage amplifier that harvests energy from a thermal gradient by exploiting negative differential resistance (NDR) in an asymmetric tunnel junction. The device is based on an asymmetric superconductor-insulator-superconductor (SIS) junction with an energy-gap ratio of Δ1/Δ2=0.5, connected in series with a load resistor. Owing to the superconducting bipolar thermoelectric effect, the current-voltage characteristic of the junction exhibits a region of NDR, in which the net current flows opposite to the applied voltage. This mechanism enables voltage amplification in the absence of any external electrical bias, relying solely on the temperature difference between the electrodes (TH≃1 K, TB≃20 mK). Numerical simulations predict a voltage gain of 20 dB, a 1 dB compression point at an input amplitude of 2 μV, and a total harmonic distortion below −50 dB. The input-referred noise is approximately 1 nV/Hz, with an associated thermal load on the order of nanowatts. The frequency response is broadband from near DC, with a −3 dB cutoff around 180 MHz, set by the RC time constant of the junction. Using Al-, Al-Cu-, and AlOx-based technologies, the amplifier is compatible with conventional superconducting circuit fabrication processes. These findings demonstrate that thermoelectric superconducting junctions can deliver bias-free voltage amplification from near DC up to about 200 MHz, making them promising candidates for transition-edge sensor readout, quantum circuit instrumentation, and low-frequency cryogenic signal processing.
The possibility of the implementation of a single-photon detector in the microwave range has been discussed. It has been shown that, for these purposes, it is possible to use an unshunted Josephson junction, which is switched from the superconducting state into a finite-voltage state at the presence of an external signal. The sensitivity of this detector is determined by the distribution of switchings in the absence of an external signal. It has been demonstrated that there is a Josephson junction with a noise temperature below 60 mK at a nominal external temperature of 10 mK. A specific detector intended for the measurement of external microwave signals has been proposed, designed, and fabricated. The first experimental results have been presented.
We design a superconducting thermoelectric bolometer made of a Graphene-Insulator-Superconductor tunnel junction. Our detector has the advantage of being passive, as it directly transduces input power to a voltage without the need to modulate an external bias. We characterize the device via numerical simulation of the full nonlinear thermal dynamical model of the junction, considering heating of both sides of the junction. While estimating noise contributions, we found novel expressions due to the temperatures of both sides being different than the bath temperature. Numerical simulations show a Noise Equivalent Power NEP∼4×10−17W/Hz for an input power of ∼10−16W, a response time of τth∼200ns and an integration time to obtain a Signal-to-Noise Ratio SNR=1 of τSNR=1∼100μs for an input power ∼10−13W. Therefore, the device shows promise for large-array cosmological experiment applications, also considering its advantages for fabrication and heat budget.
Strong interests on optical quantum based metrology, quantum information and particularly in quantum cryptography are continuously growing. The main limitations to the developments in these fields are due to non-ideal devices: both single photon sources and single photon detectors. In these field of applications, detectors require to be able to resolve the number of photons in a light pulse. Presently state of the art indicates that classical semiconductor light detectors (i.e. avalanche photodiode or single photon avalanche diode) are not able to discriminate the number of photon arriving at the same time. In the meanwhile, superconducting devices have shown the possibility to resolve single photon pulses. One of the most promising superconducting detectors is the Transition-Edge Sensor (TES): a microcalorimeter that takes advantage of the sharp transition (few millikelvin) from the superconducting to the normal phase; for this reason it is sometimes called Superconductive Phase Thermometer (SPT). In the ultraviolet (UV) to infrared (IR) wavelength range, the photons are absorbed directly by the superconductive thin film and the absorbed energy induces an increase of the TES resistance. Thanks to the applied bias voltage, which maintains the device in the transition region the photon absorption induces a decrease of the TES current, measured by a dc-SQUID amplifier, and the pulse integral of the bias power reduction corresponds to the absorbed energy. This means that TESs have the very interesting properties to be able to detect single photons with an intrinsic energy resolution, without filters or gratings, that limit the quantum efficiency. By contrary of classical detectors, if monochromatic light irradiates TESs, as usually happens in communication systems, they show the photon-number resolving (PNR) capability and due to the good signal to noise ratio TESs are almost free from dark counts. Moreover, in the superconducting detector family, TESs are the only true photon-number resolving detectors operating in the VIS-NIR range. Together with quantum information science, the PNR property results useful even for optical radiometry too. In the optical community, the candela - the International System (SI) unit for the luminous intensity - has not a common consensus whether its present definition fully satisfies the current and future needs of growing associated technology. Furthermore, actually there are substantial efforts directed toward a new definitions of four base SI units: the proposal wants to link the SI units to fundamental constants, leaving f.i. material artifact. Considering the recent advances in optical radiometry and in quantum technologies, for the candela world it means redefine its unit linking to the Planck constant and consequently expressing the luminous intensity unit in terms of photon number rather than optical power. This challenge has been accepted by several national metrology institutes to demonstrate the feasibility of redefining the candela. Inside this research project called `qu-candela', the TES PNR capability has been considered to build the bridge between the quantum and classical world of radiometry: i.e. the detector possibility to measure optical powers from one single photon per second to the lower limits of cryogenic radiometry, 104 photons per second. The theme of this work of thesis is to investigate both optical and electrical characterization of different kind of TESs based on a titanium/gold multilayer film, produced and developed at the National Institute of Metrological Research (INRIM) of Torino. Thanks to the proximity effect, the multilayer allows to lower with continuity the critical temperature from that of the Ti bulk (Tc ~ 390 mK) to those of interest: ~ 300 mK and ~ 100 mK. Detectors with higher Tc have shown a faster response pulse with a relaxing time constant of the order of 200 ns, while for the lower Tc sensors, the time constant is about 10 µs. By contrary to the response time, the detector intrinsic energy resolution is proportional to its film critical temperature. Our sensors work to discriminate incident photon from UV wavelengths to those typical of the telecommunications, 1310 nm and 1550 nm. Irradiating a TES with an active area of 10x10 µm^2 by incident photons of 0.79 eV (corresponds to a wavelength 1570 nm), the best energy resolution obtained has been 0.18 eV. Detectors with higher active area 20x20 µm^2 have a worse energy resolution, because it is also proportional to the material film heat capacity. In the meanwhile due to the same reason these kind of sensors present a bigger saturation energy. This has allowed to investigate on the TES capability to discriminate up to 29 incident photons simultaneously. Until now, such count represents the bigger amount of photons discriminated by single photon detectors, without reaching the device saturation, with a linear behaviour. From this count it has been estimated 12 photons on average, per pulse, at 9 kHz repetition rate; this results in a photon flux of about 105 photons/s, demonstrating the possibility of having a detector able to work from low flux regime to 1 photon/s to flux measurable by conventional semiconductor device (f.i. single photon avalanche detector SPAD). An innovative absolute calibration technique for PNR detector has been demonstrated. The absolute technique is based on the Klyshko's efficient solution to measure detection efficiency in photon counting rate and well know for common click-no-click detector. In fact, exploiting the recent developments in quantum state world, it is possible to work with quasi single photon state, by using a parametric down conversion heralded single photon source, and calibrate PNR detectors without requiring reference standards. The best detection efficiency, of ca. 50%, has been reached by coupling the smaller active area detectors with a 9 µm core optical fiber, single mode at telecom wavelengths