arXiv:2301.13560 · Physical Review Letters

Efficiency at Maximum Power of a Carnot Quantum Information Engine

Paul Fadler, Alexander Friedenberger, Eric Lutz

Published Jun 16, 2023• 18 citations

Abstract

Optimizing the performance of thermal machines is an essential task of thermodynamics. We here consider the optimization of information engines that convert information about the state of a system into work. We concretely introduce a generalized finite-time Carnot cycle for a quantum information engine and optimize its power output in the regime of low dissipation. We derive a general formula for its efficiency at maximum power valid for arbitrary working media. We further investigate the optimal performance of a qubit information engine subjected to weak energy measurements.

DOI: 10.1103/physrevlett.130.240401

Related papers

Efficiency at maximum power of a quantum Carnot engine with temperature tunable baths

Junjie Liu, Chang‐Yu Hsieh, Jianshu Cao

arXiv:1710.06565Oct 18, 20171 citation

Power-efficiency-stability trade-off in quantum information engines

Milton Aguilar, Cüneyt Ünal, Eric Lutz

arXiv:2509.04901Sep 5, 20250 citations

Finite-power performance of quantum heat engines in linear response

Qin Liu, Jizhou He, Yong-li Ma +1 more

Physical review. EJul 8, 201910 citations

An Information-Theoretic Bound on Thermodynamic Efficiency and the Generalized Carnot's Theorem

Anna Gabetti, Fabrizio Dolcini, Davide Girolami

quant-pharXiv:2604.10762Apr 14, 2026

Efficiency at maximum power output of quantum heat engines under finite-time operation

Jianhui Wang, Jizhou He, Zhaoqi Wu

arXiv:1111.5077Physical Review EMar 29, 201266 citations

Efficiency at maximum power of a heat engine working with a two-level atomic system

Rui Wang, Jianhui Wang, Jizhou He +1 more

Physical Review EApr 23, 201378 citations

arXiv:2301.13560 · Physical Review Letters

Efficiency at Maximum Power of a Carnot Quantum Information Engine

Paul Fadler, Alexander Friedenberger, Eric Lutz

Published Jun 16, 2023• 18 citations

arXiv HTML PDF

Abstract

DOI: 10.1103/physrevlett.130.240401

Related papers

Efficiency at maximum power of a quantum Carnot engine with temperature tunable baths

Junjie Liu, Chang‐Yu Hsieh, Jianshu Cao

We investigate the efficiency at maximum power (EMP) of irreversible quantum Carnot engines that perform finite-time cycles between two temperature tunable baths. The temperature form we adopt can be experimentally realized in squeezed baths in the high temperature limit, which makes our proposal of practical relevance. Focusing on low dissipation engines, we first generalize the pervious upper as well as lower bounds for the EMP to temperature tunable cases in which they are solely determined by a generalized Carnot limit. As an illustrative example, we then consider a minimal heat engine model with a two-level spin as the working medium. It mimics a low dissipation engine as confirmed by finite time thermodynamic optimization results. The so-obtained EMP, being constrained by the generalized bounds, is well described by a generalized Curzon- Ahlborn efficiency as consequences of a left/right symmetry for a rate constant and low dissipations. Intriguing features of this minimal heat engine under optimal power output are also demonstrated.We investigate the efficiency at maximum power (EMP) of irreversible quantum Carnot engines that perform finite-time cycles between two temperature tunable baths. The temperature form we adopt can be experimentally realized in squeezed baths in the high temperature limit, which makes our proposal of practical relevance. Focusing on low dissipation engines, we first generalize the pervious upper as well as lower bounds for the EMP to temperature tunable cases in which they are solely determined by a generalized Carnot limit. As an illustrative example, we then consider a minimal heat engine model with a two-level spin as the working medium. It mimics a low dissipation engine as confirmed by finite time thermodynamic optimization results. The so-obtained EMP, being constrained by the generalized bounds, is well described by a generalized Curzon- Ahlborn efficiency as consequences of a left/right symmetry for a rate constant and low dissipations. Intriguing features of this minimal heat engine under optimal power output are also demonstrated.

arXiv:1710.06565Oct 18, 20171 citation

Power-efficiency-stability trade-off in quantum information engines

Milton Aguilar, Cüneyt Ünal, Eric Lutz

Efficiency and power are two central measures of the performance of thermal machines. We here study the power-efficiency-stability trade-off in a finite-time quantum Carnot information engine, in which an information reservoir replaces the usual cold bath of a quantum Carnot engine. We analytically evaluate mean and variance of the work output, and demonstrate that maximum efficiency can be reached at both finite work output and finite work output fluctuations. We additionally show that the relative work output fluctuations may be smaller than those of the corresponding Carnot heat engine. This result implies that the finite-time quantum Carnot information engine can be more stable than the quantum Carnot heat engine, an important property for practical applications.Efficiency and power are two central measures of the performance of thermal machines. We here study the power-efficiency-stability trade-off in a finite-time quantum Carnot information engine, in which an information reservoir replaces the usual cold bath of a quantum Carnot engine. We analytically evaluate mean and variance of the work output, and demonstrate that maximum efficiency can be reached at both finite work output and finite work output fluctuations. We additionally show that the relative work output fluctuations may be smaller than those of the corresponding Carnot heat engine. This result implies that the finite-time quantum Carnot information engine can be more stable than the quantum Carnot heat engine, an important property for practical applications.

arXiv:2509.04901Sep 5, 20250 citations

Finite-power performance of quantum heat engines in linear response

Qin Liu, Jizhou He, Yong-li Ma +1 more

We investigate the finite-power performance of quantum heat engines working in the linear response regime where the temperature gradient is small. The engine cycles with working substances of ideal harmonic systems consist of two heat transfer and two adiabatic processes, such as the Carnot cycle, Otto cycle, and Brayton cycle. By analyzing the optimal protocol under maximum power we derive the explicitly analytic expression for the irreversible entropy production, which becomes the low dissipation form in the long duration limit. Assuming the engine to be endoreversible, we derive the universal expression for the efficiency at maximum power, which agrees well with that obtained from the phenomenological heat transfer laws holding in the classical thermodynamics. Through appropriate identification of the thermodynamic fluxes and forces that a linear relation connects, we find that the quantum engines under consideration are tightly coupled, and the universality of efficiency at maximum power is confirmed at the linear order in the temperature gradient.We investigate the finite-power performance of quantum heat engines working in the linear response regime where the temperature gradient is small. The engine cycles with working substances of ideal harmonic systems consist of two heat transfer and two adiabatic processes, such as the Carnot cycle, Otto cycle, and Brayton cycle. By analyzing the optimal protocol under maximum power we derive the explicitly analytic expression for the irreversible entropy production, which becomes the low dissipation form in the long duration limit. Assuming the engine to be endoreversible, we derive the universal expression for the efficiency at maximum power, which agrees well with that obtained from the phenomenological heat transfer laws holding in the classical thermodynamics. Through appropriate identification of the thermodynamic fluxes and forces that a linear relation connects, we find that the quantum engines under consideration are tightly coupled, and the universality of efficiency at maximum power is confirmed at the linear order in the temperature gradient.

Physical review. EJul 8, 201910 citations

An Information-Theoretic Bound on Thermodynamic Efficiency and the Generalized Carnot's Theorem

Anna Gabetti, Fabrizio Dolcini, Davide Girolami

We derive a bound on the efficiency of thermal engines that can be sharper than Carnot's limit. It is a function of statistical correlations between the engine internal state and Hamiltonian, can be saturated even in finite-time cycles, and applies to both classical and quantum engines. Specifically, the bound establishes the exact maximal efficiency of engines operating with multiple baths, tightening the upper limit set by Carnot's theorem. Then, we show that an engine made of a quantum dot coupled with fermionic baths can achieve the bound, even when operating beyond the quasistatic regime. The result provides a design principle for realistic energy harvesting machines.We derive a bound on the efficiency of thermal engines that can be sharper than Carnot's limit. It is a function of statistical correlations between the engine internal state and Hamiltonian, can be saturated even in finite-time cycles, and applies to both classical and quantum engines. Specifically, the bound establishes the exact maximal efficiency of engines operating with multiple baths, tightening the upper limit set by Carnot's theorem. Then, we show that an engine made of a quantum dot coupled with fermionic baths can achieve the bound, even when operating beyond the quasistatic regime. The result provides a design principle for realistic energy harvesting machines.

quant-pharXiv:2604.10762Apr 14, 2026

Efficiency at maximum power output of quantum heat engines under finite-time operation

Jianhui Wang, Jizhou He, Zhaoqi Wu

We study the efficiency at maximum power, ${\ensuremath{\eta}}_{m}$, of irreversible quantum Carnot engines (QCEs) that perform finite-time cycles between a hot and a cold reservoir at temperatures ${T}_{h}$ and ${T}_{c}$ , respectively. For QCEs in the reversible limit (long cycle period, zero dissipation), ${\ensuremath{\eta}}_{m}$ becomes identical to the Carnot efficiency ${\ensuremath{\eta}}_{{}_{C}}=1\ensuremath{-}{T}_{c}/{T}_{h}$. For QCE cycles in which nonadiabatic dissipation and the time spent on two adiabats are included, the efficiency ${\ensuremath{\eta}}_{m}$ at maximum power output is bounded from above by ${\ensuremath{\eta}}_{{}_{C}}/(2\ensuremath{-}{\ensuremath{\eta}}_{{}_{C}})$ and from below by ${\ensuremath{\eta}}_{{}_{C}}/2$. In the case of symmetric dissipation, the Curzon-Ahlborn efficiency ${\ensuremath{\eta}}_{{}_{\mathit{CA}}}=1\ensuremath{-}\sqrt{{T}_{c}/{T}_{h}}$ is recovered under the condition that the time allocation between the adiabats and the contact time with the reservoir satisfy a certain relation.We study the efficiency at maximum power, ${\ensuremath{\eta}}_{m}$, of irreversible quantum Carnot engines (QCEs) that perform finite-time cycles between a hot and a cold reservoir at temperatures ${T}_{h}$ and ${T}_{c}$, respectively. For QCEs in the reversible limit (long cycle period, zero dissipation), ${\ensuremath{\eta}}_{m}$ becomes identical to the Carnot efficiency ${\ensuremath{\eta}}_{{}_{C}}=1\ensuremath{-}{T}_{c}/{T}_{h}$. For QCE cycles in which nonadiabatic dissipation and the time spent on two adiabats are included, the efficiency ${\ensuremath{\eta}}_{m}$ at maximum power output is bounded from above by ${\ensuremath{\eta}}_{{}_{C}}/(2\ensuremath{-}{\ensuremath{\eta}}_{{}_{C}})$ and from below by ${\ensuremath{\eta}}_{{}_{C}}/2$. In the case of symmetric dissipation, the Curzon-Ahlborn efficiency ${\ensuremath{\eta}}_{{}_{\mathit{CA}}}=1\ensuremath{-}\sqrt{{T}_{c}/{T}_{h}}$ is recovered under the condition that the time allocation between the adiabats and the contact time with the reservoir satisfy a certain relation.

arXiv:1111.5077Physical Review EMar 29, 201266 citations

Efficiency at maximum power of a heat engine working with a two-level atomic system

Rui Wang, Jianhui Wang, Jizhou He +1 more

We consider the finite-time operation of a quantum heat engine whose working substance is composed of a two-level atomic system. The engine cycle, consisting of two quantum adiabatic and two quantum isochoric (constant-frequency) processes and working between two heat reservoirs at temperatures ${T}_{h}$ and ${T}_{c}$ $(<$ ${T}_{h})$ , is a quantum version of the classical Otto cycle. By optimizing the power output with respect to two frequencies, we obtain the efficiency at maximum power output (EMP) and analyze numerically the effects of the times taken for two adiabatic and two isochoric processes on the EMP. In the absence of internally dissipative friction, we find that the EMP is bounded from the upper side by a function of the Carnot efficiency ${\ensuremath{\eta}}_{C}$, ${\ensuremath{\eta}}_{+}={\ensuremath{\eta}}_{C}^{2}/[{\ensuremath{\eta}}_{C}\ensuremath{-}(1\ensuremath{-}{\ensuremath{\eta}}_{C})\mathrm{ln}(1\ensuremath{-}{\ensuremath{\eta}}_{C})]$, with ${\ensuremath{\eta}}_{C}=1\ensuremath{-}{T}_{c}/{T}_{h}$. This analytic expression is confirmed by our exact numerical result and is identical to the one derived in an engine model based on a mesoscopic or macroscopic system. If the internal friction is included, we find that the EMP decreases as the friction coefficient increases.We consider the finite-time operation of a quantum heat engine whose working substance is composed of a two-level atomic system. The engine cycle, consisting of two quantum adiabatic and two quantum isochoric (constant-frequency) processes and working between two heat reservoirs at temperatures ${T}_{h}$ and ${T}_{c}$$(<$${T}_{h})$, is a quantum version of the classical Otto cycle. By optimizing the power output with respect to two frequencies, we obtain the efficiency at maximum power output (EMP) and analyze numerically the effects of the times taken for two adiabatic and two isochoric processes on the EMP. In the absence of internally dissipative friction, we find that the EMP is bounded from the upper side by a function of the Carnot efficiency ${\ensuremath{\eta}}_{C}$, ${\ensuremath{\eta}}_{+}={\ensuremath{\eta}}_{C}^{2}/[{\ensuremath{\eta}}_{C}\ensuremath{-}(1\ensuremath{-}{\ensuremath{\eta}}_{C})\mathrm{ln}(1\ensuremath{-}{\ensuremath{\eta}}_{C})]$, with ${\ensuremath{\eta}}_{C}=1\ensuremath{-}{T}_{c}/{T}_{h}$. This analytic expression is confirmed by our exact numerical result and is identical to the one derived in an engine model based on a mesoscopic or macroscopic system. If the internal friction is included, we find that the EMP decreases as the friction coefficient increases.

Physical Review EApr 23, 201378 citations

We study the efficiency at maximum power, ${\ensuremath{\eta}}_{m}$, of irreversible quantum Carnot engines (QCEs) that perform finite-time cycles between a hot and a cold reservoir at temperatures

{T}_{h}

and

{T}_{c}

, respectively. For QCEs in the reversible limit (long cycle period, zero dissipation), ${\ensuremath{\eta}}_{m}$ becomes identical to the Carnot efficiency ${\ensuremath{\eta}}_{{}_{C}}=1\ensuremath{-}{T}_{c}/{T}_{h}$. For QCE cycles in which nonadiabatic dissipation and the time spent on two adiabats are included, the efficiency ${\ensuremath{\eta}}_{m}$ at maximum power output is bounded from above by ${\ensuremath{\eta}}_{{}_{C}}/(2\ensuremath{-}{\ensuremath{\eta}}_{{}_{C}})$ and from below by ${\ensuremath{\eta}}_{{}_{C}}/2$. In the case of symmetric dissipation, the Curzon-Ahlborn efficiency ${\ensuremath{\eta}}_{{}_{\mathit{CA}}}=1\ensuremath{-}\sqrt{{T}_{c}/{T}_{h}}$ is recovered under the condition that the time allocation between the adiabats and the contact time with the reservoir satisfy a certain relation.

{T}_{h}

and

{T}_{c}

(<

{T}_{h})

, is a quantum version of the classical Otto cycle. By optimizing the power output with respect to two frequencies, we obtain the efficiency at maximum power output (EMP) and analyze numerically the effects of the times taken for two adiabatic and two isochoric processes on the EMP. In the absence of internally dissipative friction, we find that the EMP is bounded from the upper side by a function of the Carnot efficiency ${\ensuremath{\eta}}_{C}$, ${\ensuremath{\eta}}_{+}={\ensuremath{\eta}}_{C}^{2}/[{\ensuremath{\eta}}_{C}\ensuremath{-}(1\ensuremath{-}{\ensuremath{\eta}}_{C})\mathrm{ln}(1\ensuremath{-}{\ensuremath{\eta}}_{C})]$, with ${\ensuremath{\eta}}_{C}=1\ensuremath{-}{T}_{c}/{T}_{h}$. This analytic expression is confirmed by our exact numerical result and is identical to the one derived in an engine model based on a mesoscopic or macroscopic system. If the internal friction is included, we find that the EMP decreases as the friction coefficient increases.