Quantum state estimation is an important task of many quantum information protocols. We consider two families of unitary evolution operators, one with a one-parameter and the other with a two-parameter, which enable the estimation of a single spin component and all spin components, respectively, of a two-level quantum system. To evaluate the tomographic performance, we use the quantum tomographic transfer function (qTTF), which is calculated as the average over all pure states of the trace of the inverse of the Fisher information matrix. Our goal is to optimize the qTTF for both estimation models. We find that the minimum qTTF for the one-parameter model is achieved when the entangling power of the corresponding unitary operator is at its maximum. The models were implemented on an IBM quantum processing unit, and while the estimation of a single-spin component was successful, the whole spin estimation displayed relatively large errors due to the depth of the associated circuit. To address this issue, we propose a new scalable circuit design that improves qubit state tomography when run on an IBM quantum processing unit.
Quantum state estimation is an important task of many quantum information protocols. We consider two families of unitary evolution operators, one with a one-parameter and the other with a two-parameter, which enable the estimation of a single spin component and all spin components, respectively, of a two-level quantum system. To evaluate the tomographic performance, we use the quantum tomographic transfer function (qTTF), which is calculated as the average over all pure states of the trace of the inverse of the Fisher information matrix. Our goal is to optimize the qTTF for both estimation models. We find that the minimum qTTF for the one-parameter model is achieved when the entangling power of the corresponding unitary operator is at its maximum. The models were implemented on an IBM quantum processing unit, and while the estimation of a single-spin component was successful, the whole spin estimation displayed relatively large errors due to the depth of the associated circuit. To address this issue, we propose a new scalable circuit design that improves qubit state tomography when run on an IBM quantum processing unit.
Current quantum computers have the potential to overcome classical computational methods, however, the capability of the algorithms that can be executed on noisy intermediate-scale quantum devices is limited due to hardware imperfections. Estimating the state of a qubit is often needed in different quantum protocols, due to the lack of direct measurements. In this paper, we consider the problem of estimating the quantum state of a qubit in a quantum processing unit without conducting direct measurements of it. We consider a parameterized measurement model to estimate the quantum state, represented as a quantum circuit, which is optimized using the quantum tomographic transfer function. We implement and test the circuit using the quantum computer of the Technical Research Centre of Finland as well as an IBM quantum computer. We demonstrate that the set of positive operator-valued measurements used for the estimation is symmetric and informationally complete. Moreover, the resources needed for qubit estimation are reduced when direct measurements are allowed, keeping the symmetric property of the measurements.
The subject of this thesis, quantum estimation theory, is inspired by recent developments, both practical and theoretical, in the new field of quantum information and computation. The main task of quantum estimation theory, the subject of this thesis, is that given many identical copies of an unknown quantum system one wants to guess or estimate what the system is. This is done by performing an measurement and analyzing the data obtained from it.
A quantum state is represented by a density matrix. In some cases one does not need to know the whole density matrix, sometimes a partial characterization is enough. Chapter 2 of this thesis is about optimally estimating the spectrum, i.e. the eigenvalues, of a density matrix. This is useful, for example, for estimating the entanglement of a bipartite pure state. The results of chapter 2 tell us that one can optimally estimate bipartite entanglement with LOCC measurements on one of the two parties.
Unitary operations transform density matrices to density matrices. They are the gates of quantum information processing. Suppose one has one such unitary operation but one does not know what it does. In order to characterize it one needs to know how it transforms any input state. In order to know how a particular state is transformed, one can prepare that state, feed it to the unitary many times, and measure the output. One state is, of course, not enough. It turns out that the unitary can be completely characterized with a finite set of states, this is known as quantum process tomography. Unfortunately, in many cases it is difficult to have available in the lab all the input states needed to perform quantum process tomography. It is here where entanglement comes to the rescue. One pair of maximally entangled qubits, where one of them is used as input for the unitary gate and the other is left untouched, is sufficient. All the information about the unknown gate is contained in the joint output state. This is the problem treated in chapter 3. Now the output state needs to be measured. Again, one could measure the two qubits separately (LOCC) or jointly (collective measurement). Is there anything to gain by performing joint measurements? The answer is yes, optimal collective measurements are at least 3 times more accurate than any LOCC measurement.
Chapter 4 treats the problem of estimating commuting unitary gates. There it is shown that this extra information makes it unnecessary to use an entangled input state and to use collective measurements at the output.
In chapters 3 and 4 it is assumed that only one copy of the unitary gate is available. If, however, more than one copy (say N ) are available at the same time one could use an N-fold entangled state as input. If no entanglement is used, classical statistics tells us that the error of the estimation is proportional to 1/√N. In the literature, it has been shown that by using an entangled state in the input one can achieve an error proportional to 1/N. However, this has been shown only for qubit gates. In chapter 5 important steps are taken in the direction of showing the same thing for a general unitary gate, but this remains an open problem.
The tomographic reconstruction of the state of a quantum-mechanical system is an essential component in the development of quantum technologies. We present an overview of different tomographic methods for determining the quantum-mechanical density matrix of a single qubit: (scaled) direct inversion, maximum likelihood estimation (MLE), minimum Fisher information distance and Bayesian mean estimation (BME). We discuss the different prior densities in the space of density matrices, on which both MLE and BME depend, as well as ways of including experimental errors and of estimating tomography errors. As a measure of the accuracy of these methods, we average the trace distance between a given density matrix and the tomographic density matrices it can give rise to through experimental measurements. We find that the BME provides the most accurate estimate of the density matrix, and suggest using either the pure-state prior, if the system is known to be in a rather pure state, or the Bures prior if any state is possible. The MLE is found to be slightly less accurate. We comment on the extrapolation of these results to larger systems.
We present two scalable and entanglement-free methods for estimating the collective state of an n-qubit quantum computer. The first method consists of a fixed set of five quantum circuits-regardless of the number of qubits-that avoid the use of entanglement as a measurement resource, relying instead on classical communication between selected pairs of qubits. The second method requires only 2n+1 circuits, each of which applies a single local gate to one of the n qubits during the measurement stage. Unlike traditional estimation methods, our approaches do not require any costly post-processing procedure to estimate a quantum state, enabling scalability to relatively large system sizes. We experimentally compare both methods on freely available IBM quantum processors, and observe how the state estimation varies with increasing number of qubits and shots. We further validated our results by estimating the 4-qubit entangled state of two remote ion-trap quantum processors, demonstrating that the optimized 2n+1 tomographic scheme achieves estimates consistent with standard methods while using exponentially fewer measurements.
In standard optical tomographic methods, the off-diagonal elements of a density matrix ρ are measured indirectly. Thus, the reconstruction of ρ, even if it is based on linear inversion, typically magnifies small errors in the experimental data. Recently, an optimal tomography solution measuring all the elements of ρ one-by-one without error magnification has been theoretically proposed. We implemented this method for two-qubit polarization states. For comparison, we also experimentally implemented other well-known tomographic protocols, either based solely on local measurements (of, e.g., the Pauli operators and James-Kwiat-Munro-White projectors) or with mutually unbiased bases requiring both local and global measurements. We reconstructed seventeen separable, partially and maximally entangled two-qubit polarization states. Our experiments show that our method has the highest stability against errors in comparison to other quantum tomographies. In particular, we demonstrate that each optimally-reconstructed state is embedded in an uncertainty circle of the smallest radius, both in terms of trace distance and disturbance. We explain how to experimentally estimate uncertainty radii for all the implemented tomographies and show that, for each reconstructed state, the relevant uncertainty circles intersect indicating the approximate location of the corresponding physical density matrix.
Quantum shadow tomography based on the classical shadow representation provides an efficient way to estimate properties of an unknown quantum state without performing a full quantum state tomography. In scenarios where estimating the expectation values for only certain classes of observables is required, obtaining information about the entire density matrix is unnecessary. We propose a partial quantum shadow tomography protocol that estimates a subset of density matrix elements relevant to the expectation values of structured observables. Specifically, we identify specific subsets of the tomographically complete set Cl(2)⊗n and a simple pseudo-inverse of the associated channel, which can be used to estimate all elements of the density matrix with the same active order. By restricting the protocol to smaller subsets of single-qubit Pauli measurements, it becomes experimentally more efficient. We demonstrate the advantage over unitary designs, such as the Clifford, full Pauli basis, and methods utilizing mutually unbiased bases, by analytically deriving error bounds and numerically evaluating the protocol on structured operators. We experimentally demonstrate the partial shadow estimation scheme for a wide class of two-qubit states (pure, entangled, and mixed) in the nuclear magnetic resonance (NMR) platform. The full density matrix, reconstructed experimentally by combining different partial estimators, achieves fidelities around 99%.