Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2301.07764 · Physical review. B./Physical review. B

Low-rank Green's function representations applied to dynamical mean-field theory

Nan Sheng, Alexander Hampel, Sophie Beck, Olivier Parcollet, Nils Wentzell, Jason Kaye, Kun Chen

Published Jun 13, 2023• 8 citations
arXivHTMLPDF

Abstract

Several recent works have introduced highly compact representations of single-particle Green's functions in the imaginary time and Matsubara frequency domains, as well as efficient interpolation grids used to recover the representations. In particular, the intermediate representation with sparse sampling and the discrete Lehmann representation (DLR) make use of low rank compression techniques to obtain optimal approximations with controllable accuracy. We consider the use of the DLR in dynamical mean-field theory (DMFT) calculations, and in particular show that the standard full Matsubara frequency grid can be replaced by the compact grid of DLR Matsubara frequency nodes. We test the performance of the method for a DMFT calculation of ${\mathrm{Sr}}_{2}{\mathrm{RuO}}_{4}$ at temperature $50\phantom{\rule{0.16em}{0ex}}\mathrm{K}$ using a continuous-time quantum Monte Carlo impurity solver, and demonstrate that Matsubara frequency quantities can be represented on a grid of only 36 nodes with no reduction in accuracy, or increase in the number of self-consistent iterations, despite the presence of significant Monte Carlo noise.

DOI
10.1103/physrevb.107.245123

Related papers

Quantum Physics: Illustration of Multidimensional Green Functions Using Julia Language

Lizeth Fernanda Silva Godoy, Jorge Milton Lara Sinaluisa, Cristian Luis Inca Balseca +3 more

In this article, the numerical level representation of imaginary time Green's functions based on a low rank decomposition of the discrete Lehmann spectral representation (DLR) using an effective spectral density has been presented with illustrative efficiency. The DLR basis consists of a collection of exponentials chosen by interpolation decomposition to ensure stable and efficient recovery of imaginary time Green functions or Matsubara frequency samples (Kaye et al., 2022). This implementation to fit behavior of a low-temperature spinless free fermionics-electron gas quantum system requires much fewer degrees of freedom for the standard discretizations. The basic functions of DLR are explicit; carefully chosen to ensure a stable and accurate approach, simplifying standard operations. Importantly, the function can be explicitly transformed to the Matsubara frequency domain or obtained directly by interpolation on a Matsubara frequency grid.

Journal of Namibian Studies History Politics Culture•May 21, 2023•0 citations

Orthogonal polynomial representation of imaginary-time Green’s functions

Lewin Boehnke, Hartmut Hafermann, Michel Ferrero +2 more

We study the expansion of single-particle and two-particle imaginary-time Matsubara Green's functions of quantum impurity models in the basis of Legendre orthogonal polynomials. We discuss various applications within the dynamical mean-field theory (DMFT) framework. The method provides a more compact representation of the Green's functions than standard Matsubara frequencies, and therefore significantly reduces the memory-storage size of these quantities. Moreover, it can be used as an efficient noise filter for various physical quantities within the continuous-time quantum Monte Carlo impurity solvers recently developed for DMFT and its extensions. In particular, we show how to use it for the computation of energies in the context of realistic DMFT calculations in combination with the local density approximation to the density functional theory (LDA+DMFT) and for the calculation of lattice susceptibilities from the local irreducible vertex function.

arXiv:1104.3215•Physical Review B•Aug 12, 2011•215 citations

Discrete Lehmann representation of imaginary time Green's functions

Jason Kaye, Kun Chen, Olivier Parcollet

We present an efficient basis for imaginary time Green's functions based on a low-rank decomposition of the spectral Lehmann representation. The basis functions are simply a set of well-chosen exponentials, so the corresponding expansion may be thought of as a discrete form of the Lehmann representation using an effective spectral density which is a sum of $\ensuremath{\delta}$ functions. The basis is determined only by an upper bound on the product $\ensuremath{\beta}{\ensuremath{\omega}}_{max}$, with $\ensuremath{\beta}$ the inverse temperature and ${\ensuremath{\omega}}_{max}$ an energy cutoff, and a user-defined error tolerance $\ensuremath{\epsilon}$. The number $r$ of basis functions scales as $O(log(\ensuremath{\beta}{\ensuremath{\omega}}_{max})log(1/\ensuremath{\epsilon}))$. The discrete Lehmann representation of a particular imaginary time Green's function can be recovered by interpolation at a set of $r$ imaginary time nodes. Both the basis functions and the interpolation nodes can be obtained rapidly using standard numerical linear algebra routines. Due to the simple form of the basis, the discrete Lehmann representation of a Green's function can be explicitly transformed to the Matsubara frequency domain, or obtained directly by interpolation on a Matsubara frequency grid. We benchmark the efficiency of the representation on simple cases, and with a high-precision solution of the Sachdev-Ye-Kitaev equation at low temperature. We compare our approach with the related intermediate representation method, and introduce an improved algorithm to build the intermediate representation basis and a corresponding sampling grid.

arXiv:2107.13094•Physical review. B./Physical review. B•Jun 13, 2022•61 citations

Exact diagonalization as an impurity solver in dynamical mean field theory

Yi Lu, M. W. Haverkort

The dynamical mean-field theory (DMFT) maps a correlated lattice problem onto an impurity problem of a single correlated site coupled to an uncorrelated bath. Most implementations solve the DMFT equations using quantum Monte-Carlo sampling on the imaginary time and frequency (Matsubara) axis. We will here review alternative methods using exact diagonalization, i.e., representing the many-body ground state of the impurity as a sum over Slater determinants and calculating Green’s functions using iterative Lanczos procedures. The advantage being that these methods have no sign problem, can handle involved multi-orbital Hamiltonians (low crystal symmetry, spin-orbit coupling) and – when working completely on the real axis – do not need a mathematically ill-posed analytical continuation. The disadvantage of traditional implementations of exact diagonalization has been the exponential scaling of the calculation problem as a function of number of bath discretization points. In the last part we will review how recent advances in exact diagonalization can evade the exponential barrier thereby increasing the number of bath discretization points to reach the thermodynamic limit.

The European Physical Journal Special Topics•Jul 1, 2017•17 citations

Sparse sampling and tensor network representation of two-particle Green's functions

Hiroshi Shinaoka, Dominique Geffroy, Markus Wallerberger +4 more

Many-body calculations at the two-particle level require a compact representation of two-particle Green’s functions. In this paper, we introduce a sparse sampling scheme in the Matsubara frequency domain as well as a tensor network representation for two-particle Green’s functions. The sparse sampling is based on the intermediate representation basis and allows an accurate extraction of the generalized susceptibility from a reduced set of Matsubara frequencies. The tensor network representation provides a system independent way to compress the information carried by two-particle Green’s functions. We demonstrate efficiency of the present scheme for calculations of static and dynamic susceptibilities in single- and two-band Hubbard models in the framework of dynamical mean-field theory.

arXiv:1909.07519•SciPost Physics•Jan 28, 2020•33 citations

Continuous-time quantum Monte Carlo solver for dynamical mean field theory in the compact Legendre representation

Evan Sheridan, Cédric Weber, Evgeny A. Plekhanov +1 more

Dynamical mean-field theory (DMFT) is one of the most widely-used methods to treat accurately electron correlation effects in ab-initio real material calculations. Many modern large-scale implementations of DMFT in electronic structure codes involve solving a quantum impurity model with a continuous-time quantum Monte Carlo (CT-QMC) solver [Rubtsov et al., Phys. Rev. B 72, 035122 (2005); Werner et al., Phys. Rev. Lett. 97, 076405 (2006); Werner and Millis, Phys. Rev. B 74, 155107 (2006); Gull et al., Rev. Mod. Phys. 83, 349 (2011)]. The main advantage of CT-QMC is that, unlike standard quantum Monte Carlo approaches, it is able to generate the local Green's functions $G(\ensuremath{\tau})$ of the correlated system on an arbitrarily fine imaginary time $\ensuremath{\tau}$ grid, and is free of any systematic errors. In this work, we extend a hybrid QMC solver proposed by Khatami et al. [Phys. Rev. E 81, 056703 (2010)] and Rost et al. [Phys. Rev. E 87, 053305 (2013)] to a multiorbital context. This has the advantage of enabling impurity solver QMC calculations to scale linearly with inverse temperature $\ensuremath{\beta}$, and permit its application to $d$- and $f$-band materials. In addition, we present a Green's-function processing scheme which generates accurate quasicontinuous imaginary time solutions of the impurity problem which overcome errors inherent to standard QMC approaches. This solver and processing scheme are incorporated into a full DFT+DMFT calculation using the castep DFT code [Clark et al., Z. Kristallogr. 220, 567 (2005)]. Benchmark calculations for ${\mathrm{SrVO}}_{3}$ properties are presented. The computational efficiency of this method is also demonstrated.

arXiv:1811.12869•Physical review. B./Physical review. B•May 30, 2019•14 citations
Several recent works have introduced highly compact representations of single-particle Green's functions in the imaginary time and Matsubara frequency domains, as well as efficient interpolation grids used to recover the representations. In particular, the intermediate representation with sparse sampling and the discrete Lehmann representation (DLR) make use of low rank compression techniques to obtain optimal approximations with controllable accuracy. We consider the use of the DLR in dynamical mean-field theory (DMFT) calculations, and in particular show that the standard full Matsubara frequency grid can be replaced by the compact grid of DLR Matsubara frequency nodes. We test the performance of the method for a DMFT calculation of Sr2RuO4{\mathrm{Sr}}_{2}{\mathrm{RuO}}_{4}Sr2​RuO4​ at temperature 50K50\phantom{\rule{0.16em}{0ex}}\mathrm{K}50K using a continuous-time quantum Monte Carlo impurity solver, and demonstrate that Matsubara frequency quantities can be represented on a grid of only 36 nodes with no reduction in accuracy, or increase in the number of self-consistent iterations, despite the presence of significant Monte Carlo noise.
In this article, the numerical level representation of imaginary time Green's functions based on a low rank decomposition of the discrete Lehmann spectral representation (DLR) using an effective spectral density has been presented with illustrative efficiency. The DLR basis consists of a collection of exponentials chosen by interpolation decomposition to ensure stable and efficient recovery of imaginary time Green functions or Matsubara frequency samples (Kaye et al., 2022). This implementation to fit behavior of a low-temperature spinless free fermionics-electron gas quantum system requires much fewer degrees of freedom for the standard discretizations. The basic functions of DLR are explicit; carefully chosen to ensure a stable and accurate approach, simplifying standard operations. Importantly, the function can be explicitly transformed to the Matsubara frequency domain or obtained directly by interpolation on a Matsubara frequency grid.
We study the expansion of single-particle and two-particle imaginary-time Matsubara Green's functions of quantum impurity models in the basis of Legendre orthogonal polynomials. We discuss various applications within the dynamical mean-field theory (DMFT) framework. The method provides a more compact representation of the Green's functions than standard Matsubara frequencies, and therefore significantly reduces the memory-storage size of these quantities. Moreover, it can be used as an efficient noise filter for various physical quantities within the continuous-time quantum Monte Carlo impurity solvers recently developed for DMFT and its extensions. In particular, we show how to use it for the computation of energies in the context of realistic DMFT calculations in combination with the local density approximation to the density functional theory (LDA+DMFT) and for the calculation of lattice susceptibilities from the local irreducible vertex function.
We present an efficient basis for imaginary time Green's functions based on a low-rank decomposition of the spectral Lehmann representation. The basis functions are simply a set of well-chosen exponentials, so the corresponding expansion may be thought of as a discrete form of the Lehmann representation using an effective spectral density which is a sum of $\ensuremath{\delta}$ functions. The basis is determined only by an upper bound on the product $\ensuremath{\beta}{\ensuremath{\omega}}_{max}$, with $\ensuremath{\beta}$ the inverse temperature and ${\ensuremath{\omega}}_{max}$ an energy cutoff, and a user-defined error tolerance $\ensuremath{\epsilon}$. The number rrr of basis functions scales as $O(log(\ensuremath{\beta}{\ensuremath{\omega}}_{max})log(1/\ensuremath{\epsilon}))$. The discrete Lehmann representation of a particular imaginary time Green's function can be recovered by interpolation at a set of rrr imaginary time nodes. Both the basis functions and the interpolation nodes can be obtained rapidly using standard numerical linear algebra routines. Due to the simple form of the basis, the discrete Lehmann representation of a Green's function can be explicitly transformed to the Matsubara frequency domain, or obtained directly by interpolation on a Matsubara frequency grid. We benchmark the efficiency of the representation on simple cases, and with a high-precision solution of the Sachdev-Ye-Kitaev equation at low temperature. We compare our approach with the related intermediate representation method, and introduce an improved algorithm to build the intermediate representation basis and a corresponding sampling grid.
The dynamical mean-field theory (DMFT) maps a correlated lattice problem onto an impurity problem of a single correlated site coupled to an uncorrelated bath. Most implementations solve the DMFT equations using quantum Monte-Carlo sampling on the imaginary time and frequency (Matsubara) axis. We will here review alternative methods using exact diagonalization, i.e., representing the many-body ground state of the impurity as a sum over Slater determinants and calculating Green’s functions using iterative Lanczos procedures. The advantage being that these methods have no sign problem, can handle involved multi-orbital Hamiltonians (low crystal symmetry, spin-orbit coupling) and – when working completely on the real axis – do not need a mathematically ill-posed analytical continuation. The disadvantage of traditional implementations of exact diagonalization has been the exponential scaling of the calculation problem as a function of number of bath discretization points. In the last part we will review how recent advances in exact diagonalization can evade the exponential barrier thereby increasing the number of bath discretization points to reach the thermodynamic limit.
Many-body calculations at the two-particle level require a compact representation of two-particle Green’s functions. In this paper, we introduce a sparse sampling scheme in the Matsubara frequency domain as well as a tensor network representation for two-particle Green’s functions. The sparse sampling is based on the intermediate representation basis and allows an accurate extraction of the generalized susceptibility from a reduced set of Matsubara frequencies. The tensor network representation provides a system independent way to compress the information carried by two-particle Green’s functions. We demonstrate efficiency of the present scheme for calculations of static and dynamic susceptibilities in single- and two-band Hubbard models in the framework of dynamical mean-field theory.
Dynamical mean-field theory (DMFT) is one of the most widely-used methods to treat accurately electron correlation effects in ab-initio real material calculations. Many modern large-scale implementations of DMFT in electronic structure codes involve solving a quantum impurity model with a continuous-time quantum Monte Carlo (CT-QMC) solver [Rubtsov et al., Phys. Rev. B 72, 035122 (2005); Werner et al., Phys. Rev. Lett. 97, 076405 (2006); Werner and Millis, Phys. Rev. B 74, 155107 (2006); Gull et al., Rev. Mod. Phys. 83, 349 (2011)]. The main advantage of CT-QMC is that, unlike standard quantum Monte Carlo approaches, it is able to generate the local Green's functions $G(\ensuremath{\tau})$ of the correlated system on an arbitrarily fine imaginary time $\ensuremath{\tau}$ grid, and is free of any systematic errors. In this work, we extend a hybrid QMC solver proposed by Khatami et al. [Phys. Rev. E 81, 056703 (2010)] and Rost et al. [Phys. Rev. E 87, 053305 (2013)] to a multiorbital context. This has the advantage of enabling impurity solver QMC calculations to scale linearly with inverse temperature $\ensuremath{\beta}$, and permit its application to ddd- and fff-band materials. In addition, we present a Green's-function processing scheme which generates accurate quasicontinuous imaginary time solutions of the impurity problem which overcome errors inherent to standard QMC approaches. This solver and processing scheme are incorporated into a full DFT+DMFT calculation using the castep DFT code [Clark et al., Z. Kristallogr. 220, 567 (2005)]. Benchmark calculations for SrVO3{\mathrm{SrVO}}_{3}SrVO3​ properties are presented. The computational efficiency of this method is also demonstrated.