Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2212.11600

A motorized rotation mount for fast and reproducible optical polarization control

Adarsh P. Raghuram, Jonathan M. Mortlock, Sarah Bromley, Simon L. Cornish

Published Dec 22, 2022• 0 citations
arXivHTMLPDF

Abstract

We present a simple motorised rotation mount for a half-wave plate that can be used to rapidly change the polarization of light. We use the device to switch a high power laser beam between different optical dipole traps in an ultracold atom experiment. The device uses a stepper motor with a hollow shaft, which allows a beam to propagate along the axis of the motor shaft, minimising inertia and mechanical complexity. A simple machined adapter is used to mount the wave plate. We characterise the performance of the device, focusing on its capability to switch a beam between the output ports of a polarizing beamsplitter cube. We demonstrate a switching time of 15.9(3) ms, limited by the torque of the motor. The mount has a reaction time of 0.52(3) ms, and a rotational resolution of 0.45 degrees. The rotation is highly reproducible, with the stepper motor not missing a step in 2000 repeated tests over 11 hours.

DOI
10.48550/arxiv.2212.11600

Related papers

A motorized rotation mount for the switching of an optical beam path in under 20 ms using polarization control

Adarsh P. Raghuram, Jonathan M. Mortlock, Sarah Bromley +1 more

We present a simple motorized rotation mount for a half-wave plate that can be used to rapidly change the polarization of light. We use the device to switch a high power laser beam between different optical dipole traps in an ultracold atom experiment. The device uses a stepper motor with a hollow shaft, which allows a beam to propagate along the axis of the motor shaft, minimizing inertia and mechanical complexity. A simple machined adapter is used to mount the wave plate. We characterize the performance of the device, focusing on its capability to switch a beam between the output ports of a polarizing beam splitter cube. We demonstrate a switching time of 15.9(3) ms, limited by the torque of the motor. The mount has a reaction time of 0.52(3) ms and a rotational resolution of 0.45(4)°. The rotation is highly reproducible, with the stepper motor not missing a step in 2000 repeated tests over 11 h.

Review of Scientific Instruments•Jun 1, 2023•3 citations

Note: Computer controlled rotation mount for large diameter optics

Ana Rakonjac, K. O. Roberts, Amita B. Deb +1 more

We describe the construction of a motorized optical rotation mount with a 40 mm clear aperture. The device is used to remotely control the power of large diameter laser beams for a magneto-optical trap. A piezo-electric ultrasonic motor on a printed circuit board provides rotation with a precision better than 0.03° and allows for a very compact design. The rotation unit is controlled from a computer via serial communication, making integration into most software control platforms straightforward.

arXiv:1212.1712•Review of Scientific Instruments•Feb 1, 2013•5 citations

Integrated optical waveplates fabricated by femtosecond laser micromachining

Giacomo Corrielli, Andrea Crespi, Riccardo Geremia +6 more

The application of integrated photonic technologies to quantum optics has recently enabled a wealth of breakthrough experiments in several quantum information areas. In particular, femtosecond laser written optical circuits revealed to be the ideal tool for investigating the features of polarization encoded qubits. However, the difficulty of integrating half and quarter wave plates in such circuits avoids the possibility to perform arbitrary rotations of the polarization state of photons on chip. Femtosecond laser written waveguides intrinsically exhibit a certain degree of birefringence and thus they could be exploited as integrated waveplates. In practice, the direction of the birefringence axes of the waveguides is the same of the propagation direction of the writing femtosecond laser beam, namely perpendicular to the substrate surface. Its fine rotation in a controlled fashion, preserving the accuracy of the positioning of the laser focal spot required by the fabrication process, is extremely challenging. In order to achieve this goal, we combine a high NA (1.4) focusing objective partially filled with a reduced diameter writing beam. In this way, the translation of the beam with respect to the objective center produces a rotation of the focusing direction, without altering the focal spot position. With this method we are able to tilt the birefringence axes of the waveguides up to 45°, and thus to use them as integrated light polarization rotators. In order to demonstrate the effectiveness of these components, we developed a fully integrated device capable to perform the quantum tomography of an arbitrary two-photon polarization state.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Mar 7, 2014•0 citations

Modulate the vector beams with magneto optic effect in atomic ensembles

Liyun Zhang, Yang Yang, Xin Yang +2 more

Abstract The ultimate challenge for shaping technology is how to control the light field with a single optical element in a high-speed manner, wherein the spatial distribution of amplitude, phase or polarization are manipulated. Here we describe the use of the magneto optic effect to achieve the rapidly shaping of vector beams in real time using atomic ensemble. Firstly, the Faraday-rotation effect of vector beams is shown. On this basis, dynamically modulate the polarization of a vector beams on each point is implemented, and the polarization state of the manipulated beam is characterized with spatially resolved Stokes parameters measurements. The response time of this manipulation is about 40 μ s. The magnetic field high-speed switching and the dynamic manipulation capabilities of this method will be particularly useful for controlling light propagation through complex media and speed up the measurement of the properties of media.

Journal of Physics B Atomic Molecular and Optical Physics•May 22, 2020•3 citations

Simple and efficient method of spin-polarizing a metastable helium beam by diode laser optical pumping

Bernd Granitza, M. Salvietti, Eugenia Torello +2 more

Diode laser optical pumping to produce a highly spin-polarized metastable He beam to be used in a spin-polarized metastable atom deexcitation spectroscopy experiment on magnetized surfaces is described. Efficient pumping of the beam is performed by means of an SDL-6702 distributed Bragg reflector diode laser which yields 50 mW of output power in a single longitudinal mode at 1083 nm, the resonance wavelength for the 23 S→23 P0,1,2 (D0, D1, and D2) transitions of He*. The light is circularly polarized by a quarter-wave plate, allowing easy change of the sense of atomic polarization. The laser frequency can be locked to the atomic transition for several hours by phase-sensitive detection of the saturated absorption signal in a He discharge cell. Any of the three transitions of the triplet system can be pumped with the laser but the maximum level of atomic polarization of 98.5% is found pumping the D2 line.

Review of Scientific Instruments•Aug 1, 1995•14 citations

Arbitrarily rotated optical axis waveguide induced by a trimming line

Ying-De Wang, Zhiyuan Zhang, Yang Chen +6 more

Rotated optical axis waveguides can facilitate on-chip arbitrary wave-plate operations, which are crucial tools for developing integrated universal quantum computing algorithms. In this paper, we propose a unique technique based on femtosecond laser direct writing technology to fabricate arbitrarily rotated optical axis waveguides. First, a circular isotropic main waveguide with a non-optical axis was fabricated using a beam shaping method. Thereafter, a trimming line was used to create an artificial stress field near the main waveguide to induce a rotated optical axis. Using this technique, we fabricated high-performance half- and quarter-wave plates. Subsequently, high-fidelity (97.1%) Pauli-X gate operation was demonstrated via quantum process tomography, which constitutes the basis for the full manipulation of on-chip polarization-encoded qubits. In the future, this work is expected to lead to new prospects for polarization-encoded information in photonic integrated circuits.

Optics Letters•May 18, 2023•7 citations
We present a simple motorised rotation mount for a half-wave plate that can be used to rapidly change the polarization of light. We use the device to switch a high power laser beam between different optical dipole traps in an ultracold atom experiment. The device uses a stepper motor with a hollow shaft, which allows a beam to propagate along the axis of the motor shaft, minimising inertia and mechanical complexity. A simple machined adapter is used to mount the wave plate. We characterise the performance of the device, focusing on its capability to switch a beam between the output ports of a polarizing beamsplitter cube. We demonstrate a switching time of 15.9(3) ms, limited by the torque of the motor. The mount has a reaction time of 0.52(3) ms, and a rotational resolution of 0.45 degrees. The rotation is highly reproducible, with the stepper motor not missing a step in 2000 repeated tests over 11 hours.
We present a simple motorized rotation mount for a half-wave plate that can be used to rapidly change the polarization of light. We use the device to switch a high power laser beam between different optical dipole traps in an ultracold atom experiment. The device uses a stepper motor with a hollow shaft, which allows a beam to propagate along the axis of the motor shaft, minimizing inertia and mechanical complexity. A simple machined adapter is used to mount the wave plate. We characterize the performance of the device, focusing on its capability to switch a beam between the output ports of a polarizing beam splitter cube. We demonstrate a switching time of 15.9(3) ms, limited by the torque of the motor. The mount has a reaction time of 0.52(3) ms and a rotational resolution of 0.45(4)°. The rotation is highly reproducible, with the stepper motor not missing a step in 2000 repeated tests over 11 h.
We describe the construction of a motorized optical rotation mount with a 40 mm clear aperture. The device is used to remotely control the power of large diameter laser beams for a magneto-optical trap. A piezo-electric ultrasonic motor on a printed circuit board provides rotation with a precision better than 0.03° and allows for a very compact design. The rotation unit is controlled from a computer via serial communication, making integration into most software control platforms straightforward.
The application of integrated photonic technologies to quantum optics has recently enabled a wealth of breakthrough experiments in several quantum information areas. In particular, femtosecond laser written optical circuits revealed to be the ideal tool for investigating the features of polarization encoded qubits. However, the difficulty of integrating half and quarter wave plates in such circuits avoids the possibility to perform arbitrary rotations of the polarization state of photons on chip. Femtosecond laser written waveguides intrinsically exhibit a certain degree of birefringence and thus they could be exploited as integrated waveplates. In practice, the direction of the birefringence axes of the waveguides is the same of the propagation direction of the writing femtosecond laser beam, namely perpendicular to the substrate surface. Its fine rotation in a controlled fashion, preserving the accuracy of the positioning of the laser focal spot required by the fabrication process, is extremely challenging. In order to achieve this goal, we combine a high NA (1.4) focusing objective partially filled with a reduced diameter writing beam. In this way, the translation of the beam with respect to the objective center produces a rotation of the focusing direction, without altering the focal spot position. With this method we are able to tilt the birefringence axes of the waveguides up to 45°, and thus to use them as integrated light polarization rotators. In order to demonstrate the effectiveness of these components, we developed a fully integrated device capable to perform the quantum tomography of an arbitrary two-photon polarization state.
Abstract The ultimate challenge for shaping technology is how to control the light field with a single optical element in a high-speed manner, wherein the spatial distribution of amplitude, phase or polarization are manipulated. Here we describe the use of the magneto optic effect to achieve the rapidly shaping of vector beams in real time using atomic ensemble. Firstly, the Faraday-rotation effect of vector beams is shown. On this basis, dynamically modulate the polarization of a vector beams on each point is implemented, and the polarization state of the manipulated beam is characterized with spatially resolved Stokes parameters measurements. The response time of this manipulation is about 40 μ s. The magnetic field high-speed switching and the dynamic manipulation capabilities of this method will be particularly useful for controlling light propagation through complex media and speed up the measurement of the properties of media.
Diode laser optical pumping to produce a highly spin-polarized metastable He beam to be used in a spin-polarized metastable atom deexcitation spectroscopy experiment on magnetized surfaces is described. Efficient pumping of the beam is performed by means of an SDL-6702 distributed Bragg reflector diode laser which yields 50 mW of output power in a single longitudinal mode at 1083 nm, the resonance wavelength for the 23 S→23 P0,1,2 (D0, D1, and D2) transitions of He*. The light is circularly polarized by a quarter-wave plate, allowing easy change of the sense of atomic polarization. The laser frequency can be locked to the atomic transition for several hours by phase-sensitive detection of the saturated absorption signal in a He discharge cell. Any of the three transitions of the triplet system can be pumped with the laser but the maximum level of atomic polarization of 98.5% is found pumping the D2 line.
Rotated optical axis waveguides can facilitate on-chip arbitrary wave-plate operations, which are crucial tools for developing integrated universal quantum computing algorithms. In this paper, we propose a unique technique based on femtosecond laser direct writing technology to fabricate arbitrarily rotated optical axis waveguides. First, a circular isotropic main waveguide with a non-optical axis was fabricated using a beam shaping method. Thereafter, a trimming line was used to create an artificial stress field near the main waveguide to induce a rotated optical axis. Using this technique, we fabricated high-performance half- and quarter-wave plates. Subsequently, high-fidelity (97.1%) Pauli-X gate operation was demonstrated via quantum process tomography, which constitutes the basis for the full manipulation of on-chip polarization-encoded qubits. In the future, this work is expected to lead to new prospects for polarization-encoded information in photonic integrated circuits.