Arbitrary light potentials have proven to be a valuable and versatile tool in many quantum information and quantum simulation experiments with ultracold atoms. Using a phase-modulating spatial light modulator (SLM), we generate arbitrary light potentials holographically with measured efficiencies between 15 and 40% and an accuracy of [Formula: see text] root-mean-squared error. Key to the high accuracy is the modelling of pixel crosstalk of the SLM on a sub-pixel scale which is relevant especially for large light potentials. We employ conjugate gradient minimisation to calculate the SLM phase pattern for a given target light potential after measuring the intensity and wavefront at the SLM. Further, we use camera feedback to reduce experimental errors, we remove optical vortices and investigate the difference between the angular spectrum method and the Fourier transform to simulate the propagation of light. Using a combination of all these techniques, we achieved more accurate and efficient light potentials compared to previous studies, and generated a series of potentials relevant for cold atom experiments.
The development of new laser beam shaping methods is important in a variety of fields within optics, atomic physics and biophotonics. Spatial light modulators offer a highly versatile method of time-dependent beam shaping, based on imprinting a phase profile onto an incident laser beam that determines the intensity in the trapping plane laser field. The calculation of the required phase is a well-known inverse problem, which can be tackled with different approaches. Our method based on conjugate gradient minimisation [1] not only allows the calculation of smooth and accurate intensity profiles suitable for trapping cold atoms, but can also be used to generate multi-wavelength traps [2] and for simultaneous control over both the intensity and the phase of the light [3], with exceptionally high reconstruction fidelity. References: [1] T Harte, et al., "Conjugate gradient minimisation approach to generating holographic traps for ultracold atoms" Opt. Express 22, 26548 (2014) [2] D Bowman, et al., "Multi-wavelength holography with a single spatial light modulator for ultracold atom experiments" Opt. Express 23, 8365 (2015) [3] D Bowman, et al., "High-fidelity phase and amplitude control of phase-only computer generated holograms using conjugate gradient minimisation" Opt. Express 25, 11692 (2017)
Abstract We show that a phase-only spatial light modulator can be used to generate non-trivial light distributions suitable for trapping ultracold atoms, when the hologram calculation is included within a simple and robust feedback loop that corrects for imperfect device response and optical aberrations. This correction reduces the discrepancy between target and experimental light distribution to the level of a few percent (root mean square error). We prove the generality of this algorithm by applying it to a variety of target light distributions of relevance for cold atomic physics.
Programmable arrays of ultracold atoms are a leading platform for quantum computation and simulation, enabling state-of-the-art implementations of quantum error correction, and analog simulations of Hubbard models that address open problems in condensed matter physics. In these systems, all local control is mediated through precisely shaped optical fields, and so the challenge of managing many-body quantum states becomes an exercise in optical design. In particular, one wishes for fast, flexible control with low disorder and heating, and access to large arrays with many atoms. An ideal optical system therefore must generate arbitrary patterns with high spatial resolution and low disorder, and alter these patterns on a timescale that is faster than the relevant atomic dynamics. Here, we present an optical system that is comparable to previous approaches in scale, while advancing all other axes. We demonstrate arbitrary pattern generation with
10−3 intensity resolution, a frame rate of
>84 MFPS (megaframes per second), and a spatial resolution of
83×52 beam waists (with
11×52 waists accessible via a single
40 GHz electro-optic modulator). These capabilities unlock a new class of experiments. We develop and numerically validate a scheme for fully programmable Hubbard models, with time-dependent control over local chemical potentials, tunneling amplitudes, on-site interactions, and patterns of artificial magnetic flux. The same architecture performs fast, arbitrary permutations of tweezers in 2D, decoupling optical constraints from the design of high-rate error-correcting codes.
This thesis details the design, construction and characterisation of an ultracold atoms system, developed in conjunction with a flexible optical trapping scheme which utilises a Liquid Crystal Spatial Light Modulator (LC SLM). The ultracold atoms system uses a hybrid trap formed of a quadrupole magnetic field and a focused far-detuned laser beam to form a Bose-Einstein Condensate of 2×10⁵ ⁸⁷Rb atoms. Cold atoms confined in several arbitrary optical trapping geometries are created by overlaying the LC SLM trap on to the hybrid trap, where a simple feedback process using the atomic distribution as a metric is shown to be capable of compensating for optical aberrations. Two novel methods for creating flexible optical traps with the LC SLM are also detailed, the first of which is a multi-wavelength technique which allows several wavelengths of light to be smoothly shaped and applied to the atoms. The second method uses a computationally-efficient minimisation algorithm to create light patterns which are constrained in both amplitude and phase, where the extra phase constraint was shown to be crucial for controlling propagation effects of the LC SLM trapping beam.
We demonstrate a method to independently and arbitrarily tailor the spatial profile of light of multiple wavelengths and we show possible applications to ultracold atoms experiments. A single spatial light modulator is programmed to create a pattern containing multiple spatially separated structures in the Fourier plane when illuminated with a single wavelength. When the modulator is illuminated with overlapped laser beams of different wavelengths, the position of the structures is wavelength-dependent. Hence, by designing their separations appropriately, a desired overlap of different structures at different wavelengths is obtained. We employ regional phase calculation algorithms and demonstrate several possible experimental scenarios by generating light patterns with 670 nm, 780 nm and 1064 nm laser light which are accurate to the level of a few percent. This technique is easily integrated into cold atom experiments, requiring little optical access.