We demonstrate a tuneable, chip-scale wavelength reference to greatly reduce the complexity and volume of cold-atom sensors. A 1 mm optical path length micro-fabricated cell provides an atomic wavelength reference, with dynamic frequency control enabled by Zeeman shifting the atomic transition through the magnetic field generated by the printed circuit board (PCB) coils. The dynamic range of the laser frequency stabilization system is evaluated and used in conjunction with an improved generation of chip-scale cold atom platforms that traps 4 million 87Rb atoms. The scalability and component consolidation provide a key step forward in the miniaturization of cold atom sensors.
We demonstrate a tuneable, chip-scale wavelength reference to greatly reduce the complexity and volume of cold-atom sensors. A 1 mm optical path length micro-fabricated cell provides an atomic wavelength reference, with dynamic frequency control enabled by Zeeman shifting the atomic transition through the magnetic field generated by the printed circuit board (PCB) coils. The dynamic range of the laser frequency stabilization system is evaluated and used in conjunction with an improved generation of chip-scale cold atom platforms that traps 4 million 87Rb atoms. The scalability and component consolidation provide a key step forward in the miniaturization of cold atom sensors.
The miniaturization of cold-atom systems brings high accuracy into portable atomic metrology. However, the impact of cold-atom sensors in real-world applications has been limited by the overall laser cooling package. This study amalgamates a chip-scale optics setup with a microfabricated laser cooling system to dramatically reduce device size, weight, and power usage. The authors use an on-chip Zeeman offset lock for laser cooling, and demonstrate improved atom number afforded by new techniques in silicon cell fabrication. The simplicity, scalability, and utility demonstrated in this cold-atom platform will enable exciting opportunities in portable cold-atom clocks and interferometers.
Laser cooled atoms have proven transformative for precision metrology, playing a pivotal role in state-of-the-art clocks and interferometers and having the potential to provide a step-change in our modern technological capabilities. To successfully explore their full potential, laser cooling platforms must be translated from the laboratory environment and into portable, compact quantum sensors for deployment in practical applications. This transition requires the amalgamation of a wide range of components and expertise if an unambiguously chip-scale cold atom sensor is to be realized. We present recent developments in cold-atom sensor miniaturization, focusing on key components that enable laser cooling on the chip-scale. The design, fabrication, and impact of the components on sensor scalability and performance will be discussed with an outlook to the next generation of chip-scale cold atom devices.
Laser-cooled atoms are a key quantum medium for atomic clocks, precision metrology, and atom interferometers, and they hold strong potential to advance quantum technologies for position, navigation, and timing. Realizing this potential requires moving cold-atom systems beyond laboratory environments. Integrated photonic chips provide a path forward by improving reliability and reducing size, weight, and power consumption, enabling portable and compact quantum sensors for real-world applications. This review surveys recent progress in laser-cooled atomic platforms, with a focus on the key components that enable on-chip integration of cold-atom systems. We discuss on-chip laser stabilization and linewidth-narrowing techniques, enhanced photon–atom coupling at the chip scale, miniaturized high-vacuum chambers, and the integration of on-chip magnetic coils for cold-atom sensing. Together, these developments are critical to the deployment of chip-scale cold-atom devices in both fundamental atomic physics and practical sensing applications. We conclude with an outlook on next-generation integrated cold-atom platforms and their potential impact on quantum technologies.
In this study, a miniature laser frequency stabilization module for cold atom sensing applications was designed and realized.The module can lock the laser frequency to the saturated absorption spectrum of the D2 line of rubidium (Rb) atoms using the frequency modulation spectroscopy method.The module core is a tiny Rb cell, co-packaged with the saturation absorption optical setup, temperature control circuit, and detection circuit through a joint optical-mechanical-electrical design for a total volume of only 40 mm × 15 mm × 30 mm.The frequency fluctuation of the 780 nm laser after frequency stabilization by the module was within 1 MHz over 1000 s, which is adequate for magneto-optical trap experiments.The results verify the feasibility of the module as a frequency reference and provide a light source for portable cold atom sensing devices.
A low-cost, mass-producible laser-cooling platform would have a transformative effect in the burgeoning field of quantum technologies and the wider research of atomic sensors. Recent advancements in the micro-fabrication of diffractive optics and vacuum apparatus have paved the way for a simple, stackable solution to the laser cooling of alkali atoms. In this paper we will highlight our recent investigations into a chip-scale, cold-atom platform, outlining our approach for on-chip wavelength referencing, examining a solution for imaging atoms in a planar stacked device, and finally discussing the limitations to passively pumped vacuum longevity. These results will be discussed in the context of an outlined road-map for the production and commercialisation of chip-scale, cold-atom sensors.
Atomic clocks play a crucial role in timekeeping, communications, and navigation systems. Recent efforts enabled by heterogeneous MEMS integration have led to the commercial introduction of Chip-Scale Atomic Clocks (CSAC) with a volume of 16 cm3, power consumption of 120 mW, and instability (Allan Deviation) of σ(τ = 1 sec) < 2e-10. In order to reduce the temperature sensitivity of next-generation CSACs for timing applications, the interaction of atoms with the environment must be minimized, which can be accomplished in an architecture based on trapped, laser-cooled atoms. In this paper, we present results describing the development of a miniature cold-atom apparatus for operation as a frequency standard. Our architecture is based on laser-cooling a sample of neutral atoms in a Magneto-Optical Trap (MOT) using a conical retro-reflector in a miniature vacuum chamber. Trapping the atoms in vacuum and performing microwave interrogation in the dark reduces the temperature sensitivity compared to vapor-cell CSACs. We present details of the component development associated with the laser systems, opto-electronics, and vacuum package for miniature cold-atom technology. Finally, we conclude by characterizing the optimum alkali background pressure for such a cold-atom frequency standard.