Nonlinear nanomechanical resonators approaching the quantum ground state
Chandan Samanta, Sergio L. De Bonis, C. Møller, R. Tormo-Queralt, Wei Yang, C. Urgell, Biljana Stamenić, Brian J. Thibeault, Yong Jin, David A. Czaplewski, F. Pistolesi, Adrian Bachtold
Abstract It is an open question whether mechanical resonators can be made nonlinear with vibrations approaching the quantum ground state. This requires the engineering of a mechanical nonlinearity far beyond what has been realized so far. Here we discover a mechanism to boost the Duffing nonlinearity by coupling the vibrations of a nanotube resonator to single-electron tunnelling and by operating the system in the ultrastrong-coupling regime. We find that thermal vibrations become highly nonlinear when lowering the temperature. The average vibration amplitude at the lowest temperature is 13 times the zero-point motion, with approximately 42% of the thermal energy stored in the anharmonic part of the potential. Our work may enable the realization of mechanical Schrödinger cat states, mechanical qubits and quantum simulators emulating the electron–phonon coupling.
Abstract It is an open question whether mechanical resonators can be made nonlinear with vibrations approaching the quantum ground state. This requires the engineering of a mechanical nonlinearity far beyond what has been realized so far. Here we discover a mechanism to boost the Duffing nonlinearity by coupling the vibrations of a nanotube resonator to single-electron tunnelling and by operating the system in the ultrastrong-coupling regime. We find that thermal vibrations become highly nonlinear when lowering the temperature. The average vibration amplitude at the lowest temperature is 13 times the zero-point motion, with approximately 42% of the thermal energy stored in the anharmonic part of the potential. Our work may enable the realization of mechanical Schrödinger cat states, mechanical qubits and quantum simulators emulating the electron–phonon coupling.
Due to their small mass and large mechanical stiffness, free-standing carbon nanotubes turn out to be superb high-frequency mechanical resonators that could find applications in mass and force sensing. With resonance frequencies up to the gigahertz regime, one can envision cooling the mechanical motion of such nanotubes to its quantum mechanical ground state at cryogenic temperatures. This opens the possibility to generate highly nonclassical states of the mechanical motion, similar to those created several years ago with electromagnetic radiation in superconducting microwave resonators. Such states are interesting from a fundamental physics point of view, but potentially also for quantum information and sensing applications. While classical activation of a harmonic oscillator will always produce ``quasiclassical'' coherent states, a necessary ingredient for the production of nonclassical states such as Fock states is a nonlinear element, e.g., superconducting qubits in the case of microwaves. This work predicts that for mechanical oscillations, the spin-orbit coupling of the mechanical motion to a single localized electron spin can do the trick by acting as a nonlinear element for phonons.
Nonlinearity at the scale of zero-point motion opens new possibilities for the control and readout of nanomechanical systems, but achieving this remains a formidable challenge. Here we demonstrate that ultrastrong coupling (USC) between a nanotube mechanical oscillator and a double-quantum-dot electronic two-level system enables a mechanical Kerr (Duffing) nonlinearity at the zero-point motion scale. In the dispersive regime, this large coupling yields a mechanical anharmonicity of α=1.4% - three orders of magnitude larger than in previous work - while preserving the predominantly mechanical nature of the lowest energy states. We further demonstrate a purely quadratic cavity-based continuous readout of the mechanical motion. This continuous nonlinear optomechanical readout is enforced by a double-quantum dot symmetry, which can be broken by gate tuning to introduce a large linear transduction. These results establish a tunable USC platform that enables strong mechanical anharmonicity and nonlinear continuous readout at the zero-point motion scale.
The coupling of nanomechanical resonators to controllable quantum systems represents a growing and promising area of research. Recent advances in this field have brought to astonishing results, such as the initialization of a mechanical resonator into its quantum ground state and even the preparation of non-classical coherent states of motion. These achievements open up appealing scenarios to quantum information technologies and to the exploration of the quantum-classical boundary. From an application perspective, such quantum-mechanical hybrid systems provide a versatile and attractive tool for a variety of precision measurements, like ultra-sensitive detection of force, mass, and displacement. \n \nQuantum control over a mechanical resonator, or, conversely, the prospect of using resonator's motion for probing quantum states, both involve some tight requirements. First of all, the interaction between the mechanics and its quantum partner has to be large on the scale of the decoherence rates of the coupled systems. In most cases, the coupling mechanism has to be activated by engineering the resonator with electrodes, magnets, or mirrors, or by using tailored laser fields. For this reason, the search for a strong coupling typically competes with the requirement of overcoming decoherence effects. In addition, for quantum effects to be observable, strong coupling has to be accompanied by the preparation of zero entropy initial states, for instance by cooling the resonator into its ground state of motion. \n \nThe motivation pursued by this thesis is to contribute to the inspiring field of hybrid systems by walking through each of the aforementioned directions. We in fact demonstrate a promising system in which optically active quantum dots, embedded in fully self-assembled core-shell nanowires, are coupled to the nanowire motion. Mechanical vibrations of the nanowire modulate the quantum dot emission energy over a broad range exceeding 14 meV, by means of deformation potential coupling. In our system, therefore, both the coupling mechanism and the quantum states themselves are intrinsic to the resonator's structure. Besides revealing unusually strong, such a built-in opto-mechanical interaction produces a hybrid system whose inherent coherence is unspoiled by any functionalization or external field and whose fabrication is simpler than top-down techniques. \n \nWe further demonstrate the use of a quantum point contact as a displacement transducer to measure and control the low-temperature thermal motion of a nearby micromechanical cantilever. We show that by including the QPC in a suitable feedback loop, we are able to cool the cantilever's fundamental mechanical mode down to the level of the measurement noise, achieving a squashing of the QPC noise at high gain. Due to its off-board design, our system is particularly versatile and suitable to force-sensing applications. Since the QPC transducer is sensitive to local modifications of the nearby electric field, our approach is in principle compatible with any nanoscale resonator, without requiring any functionalization to activate the coupling. By improving the performance of the QPC as a one-dimensional conductor and the cantilever-QPC capacitive coupling, our system has the potential to achieve quantum-limited displacement resolution and ground state cooling. We then report on some ongoing attempts to overcome the current limitations of our system and couple mechanical motion to different mesoscopic transport devices. \n \nWe remark that our demonstration of an as-grown quantum-dot-in-nanowire hybrid system opens up bright prospects on future experiments, as also testified by the very recent ferment of the scientific community around this topic. We find that the opto-mechanical coupling rate is not far from the nanowire mechanical frequency. This fact makes our system particularly promising for the quantum non-demolition readout of a quantum dot state through a measurement of the nanowire position. On the other hand, we show that the coupling can be further optimized, and the nanowire mechanical heating rate reduced, thus disclosing the captivating perspective of using quantum dots to probe and control the mechanical state of a nanowire. In this context, it would be important to investigate a possible spin-oscillator coupling in our system, given the long coherence time offered by a spin state in a quantum dot. The wide range of control over the quantum dots emission energy and the ability to tune two neighboring dots into resonance pave the way to mechanically induced emitter-emitter coupling. In addition, our monolithic opto-mechanical system constitutes a good candidate for recent proposals of a tripartite hybrid system, which would integrate an optical cavity, a quantum two-level system and a mechanical resonator. The intrinsically strong coupling between the quantum dots and the nanowire motion would enhance the interaction between the mechanics and the cavity field, leading for instance to efficient cooling of the resonator to the ground state. Finally, the quantum dot sensitivity to the nanowire resonant vibration could also support the use of our system as an integrated force probe or as a nanomechanical mass sensor. In other words, the results reported in this dissertation constitute not only a relevant proof-of-principle, moreover they open up intriguing challenges for future research.
We address quantitatively the relationship between the nonlinearity of a mechanical resonator and the nonclassicality of its ground state. In particular, we analyze the nonclassical properties of the nonlinear Duffing oscillator (being driven or not) as a paradigmatic example of a nonlinear nanomechanical resonator. We first discuss how to quantify the nonlinearity of this system and then show that the nonclassicality of the ground state, as measured by the volume occupied by the negative part of the Wigner function, monotonically increases with the nonlinearity in all the working regimes addressed in our study. Our results show quantitatively that nonlinearity is a resource to create nonclassical states in mechanical systems.
We address quantitatively the relationship between the nonlinearity of a mechanical resonator and the nonclassicality of its ground state. In particular, we analyze the nonclassical properties of the nonlinear Duffing oscillator (being driven or not) as a paradigmatic example of a nonlinear nanomechanical resonator. We first discuss how to quantify the nonlinearity of this system and then show that the nonclassicality of the ground state, as measured by the volume occupied by the negative part of the Wigner function, monotonically increases with the nonlinearity in all the working regimes addressed in our study. Our results show quantitatively that nonlinearity is a resource to create nonclassical states in mechanical systems.
Although strong nonlinear interactions between quantized excitations are an important resource for quantum technologies based on bosonic oscillator modes, most electromagnetic and mechanical nonlinearities are far too weak to allow for nonlinear effects to be observed at the single-quantum level. This limitation has been overcome in electromagnetic resonators by coupling them to other strongly nonlinear quantum systems such as atoms and superconducting qubits. We demonstrate the realization of the single-phonon nonlinear regime in a solid-state mechanical system. The single-phonon anharmonicity in our system exceeds the decoherence rate by a factor of 6.8, allowing us to use it as a mechanical qubit and demonstrate initialization, readout, and single-qubit gates. Our approach provides a powerful quantum acoustics platform for quantum simulations, sensing, and information processing.