The recently proposed Josephson traveling-wave parametric amplifier (JTWPA) based on a ladder transmission line consisting of radio-frequency superconducting quantum interference devices and exploiting three-wave mixing has great potential in achieving both a gain of 20 dB and a flat bandwidth of at least 4 GHz. To realize this concept in practical amplifiers, we model the advanced JTWPA circuit with periodic modulation of the circuit parameters (engineered dispersion loadings), which allow the basic mixing process, i.e., ωs=ωp−ωi, where ωs, ωp, and ωi are the signal, the pump, and the idler frequencies, respectively, and efficiently suppress propagation of unwanted higher tones, including ω2p=2ωp, ωp+s=ωp+ωs, ωp+i=ωp+ωi, etc. The engineered dispersion loadings allow achieving a sufficiently wide 3 dB-bandwidth from 3 to 9 GHz combined with a reasonably small ripple (±2 dB) in the gain-vs-frequency dependence.
The recently proposed Josephson traveling-wave parametric amplifier (JTWPA) based on a ladder transmission line consisting of radio-frequency superconducting quantum interference devices and exploiting three-wave mixing has great potential in achieving both a gain of 20 dB and a flat bandwidth of at least 4 GHz. To realize this concept in practical amplifiers, we model the advanced JTWPA circuit with periodic modulation of the circuit parameters (engineered dispersion loadings), which allow the basic mixing process, i.e., ωs=ωp−ωi, where ωs, ωp, and ωi are the signal, the pump, and the idler frequencies, respectively, and efficiently suppress propagation of unwanted higher tones, including ω2p=2ωp, ωp+s=ωp+ωs, ωp+i=ωp+ωi, etc. The engineered dispersion loadings allow achieving a sufficiently wide 3 dB-bandwidth from 3 to 9 GHz combined with a reasonably small ripple (±2 dB) in the gain-vs-frequency dependence.
We develop the concept of quasi-phasematching (QPM) by implementing it in the recently proposed Josephson traveling-wave parametric amplifier (JTWPA) with three-wave mixing (3WM). The amplifier is based on a ladder transmission line consisting of flux-biased radio frequency superconducting quantum interference devices (SQUIDs) whose nonlinearity is of χ(2)-type. QPM is achieved in the 3WM process, ωp=ωs+ωi (where ωp, ωs, and ωi are the pump, signal, and idler frequencies, respectively) due to designing the JTWPA to include periodically inverted groups of these SQUIDs that reverse the sign of the nonlinearity. Modeling shows that the JTWPA bandwidth is relatively large (∼ 0.4ωp) and flat, while unwanted modes, including ω2p=2ωp, ω+=ωp+ωs, and ω−=2ωp−ωs, are strongly suppressed with the help of engineered dispersion.
We develop a concept of traveling-wave Josephson parametric amplifier based on a ladder-type superconducting transmission line containing serial array of one-junctions SQUIDs. The circuit operates in a three-wave mixing mode and exploits both quadratic and cubic (Kerr) nonlinearities in the current-phase relation of the SQUIDs controlled by external magnetic flux. These two types of nonlinearities allow efficient three-wave mixing and perfect phase matching, respectively. The transmission line exhibits a power gain with exponential dependence on its length (number of cells N) in the widest frequency range, 0≲fs,fi≲fp, where fs, fi and fp are the signal, idler and pump frequencies, respectively, obeying relation fs+fi=fp. Estimation of the amplifier characteristics with typical experimental parameters, number of cells N = 700, length of 28 mm and pump frequency of 12.5 GHz yields a flat (-3 dB) gain of about 20 dB in the bandwidth from 3.35 GHz to 9.15 GHz and a saturation power of -90 dBm.
Bringing signals from quantum to classical, from few-photon to many-photon levels for further processing, is a common challenge in rising quantum technologies. These include quantum computing, quantum communication, quantum sensing, radio astronomy, and dark matter searches, typically operating at microwave frequencies and millikelvin temperatures. Superconducting parametric amplifiers, as the first piece in the readout chain, have become a cornerstone of these technologies, since they offer unrivaled noise performance near the quantum-mechanical limit and high gain to surpass the noise of subsequent amplifiers. A notable implementation is the Josephson traveling-wave parametric amplifier (TWPA), which stands out due to its bandwidth of several Gigahertz and high saturation power, often larger than -100 dBm. These key properties come at the cost of complexity in design and fabrication: TWPA metamaterials often contain several thousands of Josephson junctions. Designing high-gain TWPAs involves three major challenges: ensuring impedance-matching, phase-matching of parametric amplification, and suppressing unwanted processes, all achievable through sub-wavelength dispersion engineering. This thesis covers the circuit design and analysis, implementation, and experimental characterization of a dispersion-engineered TWPA based on radio-frequency superconducting interference devices (rf-SQUIDs). It focuses on a detailed investigation of dispersion-engineering techniques and their effects on amplifier performance, particularly through the use of time-domain circuit simulations to analyze the multimode dynamics of the circuit. The experimentally realized device features 18 dB of gain, an instantaneous bandwidth spanning from 2.2 to 6.7 GHz, a system noise of 2.5 quanta, and a saturation power of (−86.5 ± 4.0) dBm. With these characteristics, it is suitable for frequency-multiplexed readout of detector arrays or qubits. Its high saturation power, about 10 dB higher than other reported Josephson-junction-based TWPAs, allows increasing the number of qubits per readout line, or decreasing the intermodulation between frequency-multiplexed qubits, both crucial for scaling up quantum computation.
We report on the implementation of a near-quantum-limited, traveling-wave parametric amplifier that uses three-wave mixing (3WM). To favor amplification by 3WM, we use superconducting nonlinear asymmetric inductive element (SNAIL) loops, biased with a dc magnetic flux. In addition, we equip the device with dispersion engineering features to create a stopband at the second harmonic of the pump and suppress the propagation of the higher harmonics that otherwise degrade the amplification. With a chain of 440 SNAILs, the amplifier provides up to 20 dB gain and a 3-dB bandwidth of 1 GHz. The added noise by the amplifier is found to be less than one photon.
With potentially quantum limited performance and wide frequency bandwidth, traveling-wave Josephson parametric amplifiers (TWJPAs) based on superconducting circuits are in urgent demand for quantum information processing. This study designs a TWJPA in which the interacting pump and signal/idler microwaves propagate with similar phase velocities through two different transmission lines, thereby enabling parametric gain. Such operation is possible due to a chain of SQUIDs that form the signal transmission line, which is magnetically coupled to a separate pump $L\phantom{\rule{0}{0ex}}C$ line. The proposed circuit may greatly simplify the measurement setup and solve the problem of pump depletion.
This research investigates the realization of parametric amplification in superconducting circuits and structures where nonlinearity is provided by Josephson junction (JJ) elements. We aim to develop a systematic analysis over JJ-based devices toward design of novel traveling-wave Josephson parametric amplifiers (TW-JPA). Chapters of this thesis fall into three categories: lumped JPA, superconducting periodic structures and discrete Josephson transmission lines (DJTL). \nThe unbiased Josephson junction (JJ) is a nonlinear element suitable for parametric amplification through a four-photon process. Two circuit topologies are introduced to capture the unique property of the JJ in order to efficiently mix signal, pump and idler signals for the purpose of signal amplification. Closed-form expressions are derived for gain characteristics, bandwidth determination, noise properties and impedance for this kind of parametric power amplifier. The concept of negative resistance in the gain formulation is observed. A design process is also introduced to find the regimes of operation for gain achievement. Two regimes of operation, oscillation and amplification, are highlighted and distinguished in the result section. Optimization of the circuits to enhance the bandwidth is also carried out. \nMoving toward TW-JPA, the second part is devoted to modelling the linear wave propagation in a periodic superconducting structure. We derive closed-form equations for dispersion and s-parameters of infinite and finite periodic structures, respectively. Band gap formation is highlighted and its potential applications in the design of passive filters and resonators are discussed. The superconducting structures are fabricated using YBCO and measured, illustrating a good correlation with the numerical results. \nA novel superconducting Transmission Line (TL), which is periodically loaded by Josephson junctions (JJ) and assisted by open stubs, is proposed as a platform to realize a traveling-wave parametric device. Using the TL model, this structure is modeled by a system of nonlinear partial differential equations (PDE) with a driving source and mixed-boundary conditions at the input and output terminals, respectively. This model successfully emulates parametric and nonlinear microwave propagation when long-wave approximation is applicable. The influence of dispersion to sustain three non-degenerate phased-locked waves through the TL is highlighted. \nA rigorous and robust Finite Difference Time Domain (FDTD) solver based on the explicit Lax-Wendroff and implicit Crank-Nicolson schemes has been developed to investigate the device responses under various excitations. Linearization of the wave equation, under small-amplitude assumption, dispersion and impedance analysis is performed to explore more aspects of the device for the purpose of efficient design of a traveling-wave parametric amplifier. \nKnowing all microwave characteristics and identifying different regimes of operation, which include impedance properties, cut-off propagation, dispersive behaviour and shock-wave formation, we exploit perturbation theory accompanied by the method of multiple scale to derive the three nonlinear coupled amplitude equations to describe the parametric interaction. A graphical technique is suggested to find three waves on the dispersion diagram satisfying the phase-matching conditions. Both cases of perfect phase-matching and slight mismatching are addressed in this work. The incorporation of two numerical techniques, spectral method in space and multistep Adams-Bashforth in time domain, is employed to monitor the unilateral gain, superior stability and bandwidth of this structure. Two types of functionality, mixing and amplification, with their requirements are described. These properties make this structure desirable for applications ranging from superconducting optoelectronics to dispersive readout of superconducting qubits where high sensitivity and ultra-low noise operation is required.