Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2209.10605

Multilevel resonant tunneling in the presence of flux and charge noise

Anatoly Yu. Smirnov, Alexander Whiticar, M. H. S. Amin

Published Sep 21, 2022• 0 citations
arXivHTMLPDF

Abstract

Macroscopic resonant tunneling (MRT) in flux qubits is an important experimental tool for extracting information about noise produced by a qubit's surroundings. Here we present a detailed derivation of the MRT signal in the RF-SQUID flux qubit allowing for effects of flux and charge fluctuations on the interwell and intrawell transitions in the system. Taking into consideration transitions between the ground state in the initial well and excited states in the target well enable us to characterize both flux and charge noise source affecting the operation of the flux qubit. The MRT peak is formed by the dominant noise source affecting specific transition, with flux noise determining the lineshape of the ground to ground tunneling, whereas charge noise reveals itself as additional broadening of the ground to excited peak.

DOI
10.48550/arxiv.2209.10605

Related papers

Probing flux and charge noise with macroscopic resonant tunneling

Alexander Whiticar, Anatoly Yu. Smirnov, Trevor M. Lanting +8 more

We report on measurements of flux and charge noise in an rf-SQUID (superconducting quantum interference device) flux qubit using macroscopic resonant tunneling (MRT). We measure rates of incoherent tunneling from the lowest energy state in the initial well to the ground and first excited states in the target well. The result of the measurement consists of two peaks. The first peak corresponds to tunneling to the ground state of the target well, and is dominated by flux noise. The second peak is due to tunneling to the excited state and is wider due to an intrawell relaxation process dominated by charge noise. We develop a theoretical model that allows us to extract information about flux and charge noise within one experimental setup. The model agrees very well with experimental data over a wide dynamic range and provides parameters that characterize charge and flux noise.

arXiv:2210.01714•Physical review. B./Physical review. B•Feb 10, 2023•5 citations

Probing high-frequency noise with macroscopic resonant tunneling

Trevor M. Lanting, M. H. S. Amin, Mark W. Johnson +9 more

We have developed a method for extracting the high-frequency noise spectral density of an rf-SQUID flux qubit from macroscopic resonant tunneling (MRT) rate measurements. The extracted noise spectral density is consistent with that of an ohmic environment up to frequencies $~$4 GHz. We have also derived an expression for the MRT line shape expected for a noise spectral density consisting of such a broadband ohmic component and an additional strongly peaked low-frequency component. This hybrid model provides an excellent fit to experimental data across a range of tunneling amplitudes and temperatures.

arXiv:1103.1931•Physical Review B•May 10, 2011•23 citations

Macroscopic resonant tunneling in an rf-SQUID flux qubit under a single-cycle sinusoidal driving *

Jianxin Shi, Weiwei Xu, Guozhu Sun +3 more

We experimentally demonstrate the observation of macroscopic resonant tunneling (MRT) phenomenon of the macroscopic distinct flux states in a radio frequency superconducting quantum interference device (rf-SQUID) under a single-cycle sinusoidal driving. The population of the qubit exhibits interference patterns corresponding to resonant tunneling peaks between states in the adjacent potential wells. The dynamics of the qubit depends significantly on the amplitude, frequency, and initial phase of the driving signal. We do the numerical simulations considering the intra-well and inter-well relaxation mechanism, which agree well with the experimental results. This approach provides an effective way to manipulate the qubit population by adjusting the parameters of the external driving field.

Chinese Physics B•Apr 1, 2017•0 citations

Probing Noise in Flux Qubits via Macroscopic Resonant Tunneling

R. Harris, Mark W. Johnson, Siyuan Han +13 more

Macroscopic resonant tunneling between the two lowest lying states of a bistable rf SQUID is used to characterize noise in a flux qubit. Measurements of the incoherent decay rate as a function of flux bias revealed a Gaussian-shaped profile that is not peaked at the resonance point but is shifted to a bias at which the initial well is higher than the target well. The rms amplitude of the noise, which is proportional to the dephasing rate 1/tauphi, was observed to be weakly dependent on temperature below 70 mK. Analysis of these results indicates that the dominant source of low energy flux noise in this device is a quantum mechanical environment in thermal equilibrium.

arXiv:0712.0838•Physical Review Letters•Sep 10, 2008•81 citations

Macroscopic Resonant Tunneling in the Presence of Low Frequency Noise

M. H. S. Amin, D. V. Averin

We develop a theory of macroscopic resonant tunneling of flux in a double-well potential in the presence of realistic flux noise with a significant low-frequency component. The rate of incoherent flux tunneling between the wells exhibits resonant peaks, the shape and position of which reflect qualitative features of the noise, and can thus serve as a diagnostic tool for studying the low-frequency flux noise in SQUID qubits. We show, in particular, that the noise-induced renormalization of the first resonant peak provides direct information on the temperature of the noise source and the strength of its quantum component.

arXiv:0712.0845•Physical Review Letters•May 13, 2008•49 citations

Macroscopic resonant tunneling in an rf-SQUID flux qubit

Shanhua Cong, Yiwen Wang, Guozhu Sun +3 more

We have observed the macroscopic resonant tunneling of magnetic flux between macroscopically distinct quantum states in a superconducting flux qubit. The dependences of the macroscopic resonant tunneling on the barrier height of the potential well, the flux bias and the initial state are investigated. Detailed measurements of the tunneling rate as a function of the flux bias reveal the feature of the quantum noise in the superconducting flux qubit.

Chinese Physics B•May 1, 2011•6 citations
Macroscopic resonant tunneling (MRT) in flux qubits is an important experimental tool for extracting information about noise produced by a qubit's surroundings. Here we present a detailed derivation of the MRT signal in the RF-SQUID flux qubit allowing for effects of flux and charge fluctuations on the interwell and intrawell transitions in the system. Taking into consideration transitions between the ground state in the initial well and excited states in the target well enable us to characterize both flux and charge noise source affecting the operation of the flux qubit. The MRT peak is formed by the dominant noise source affecting specific transition, with flux noise determining the lineshape of the ground to ground tunneling, whereas charge noise reveals itself as additional broadening of the ground to excited peak.
We report on measurements of flux and charge noise in an rf-SQUID (superconducting quantum interference device) flux qubit using macroscopic resonant tunneling (MRT). We measure rates of incoherent tunneling from the lowest energy state in the initial well to the ground and first excited states in the target well. The result of the measurement consists of two peaks. The first peak corresponds to tunneling to the ground state of the target well, and is dominated by flux noise. The second peak is due to tunneling to the excited state and is wider due to an intrawell relaxation process dominated by charge noise. We develop a theoretical model that allows us to extract information about flux and charge noise within one experimental setup. The model agrees very well with experimental data over a wide dynamic range and provides parameters that characterize charge and flux noise.
We have developed a method for extracting the high-frequency noise spectral density of an rf-SQUID flux qubit from macroscopic resonant tunneling (MRT) rate measurements. The extracted noise spectral density is consistent with that of an ohmic environment up to frequencies $~$4 GHz. We have also derived an expression for the MRT line shape expected for a noise spectral density consisting of such a broadband ohmic component and an additional strongly peaked low-frequency component. This hybrid model provides an excellent fit to experimental data across a range of tunneling amplitudes and temperatures.
We experimentally demonstrate the observation of macroscopic resonant tunneling (MRT) phenomenon of the macroscopic distinct flux states in a radio frequency superconducting quantum interference device (rf-SQUID) under a single-cycle sinusoidal driving. The population of the qubit exhibits interference patterns corresponding to resonant tunneling peaks between states in the adjacent potential wells. The dynamics of the qubit depends significantly on the amplitude, frequency, and initial phase of the driving signal. We do the numerical simulations considering the intra-well and inter-well relaxation mechanism, which agree well with the experimental results. This approach provides an effective way to manipulate the qubit population by adjusting the parameters of the external driving field.
Macroscopic resonant tunneling between the two lowest lying states of a bistable rf SQUID is used to characterize noise in a flux qubit. Measurements of the incoherent decay rate as a function of flux bias revealed a Gaussian-shaped profile that is not peaked at the resonance point but is shifted to a bias at which the initial well is higher than the target well. The rms amplitude of the noise, which is proportional to the dephasing rate 1/tauphi, was observed to be weakly dependent on temperature below 70 mK. Analysis of these results indicates that the dominant source of low energy flux noise in this device is a quantum mechanical environment in thermal equilibrium.
We develop a theory of macroscopic resonant tunneling of flux in a double-well potential in the presence of realistic flux noise with a significant low-frequency component. The rate of incoherent flux tunneling between the wells exhibits resonant peaks, the shape and position of which reflect qualitative features of the noise, and can thus serve as a diagnostic tool for studying the low-frequency flux noise in SQUID qubits. We show, in particular, that the noise-induced renormalization of the first resonant peak provides direct information on the temperature of the noise source and the strength of its quantum component.