We present a nonlinear multimode superconducting electroacoustic system, where the interplay between superconducting kinetic inductance and piezoelectric strong coupling establishes an effective Kerr nonlinearity among multiple acoustic modes at 10 GHz that could hardly be achieved via intrinsic mechanical nonlinearity. By exciting this multimode Kerr system with a single microwave tone, we further demonstrate a coherent electroacoustic frequency comb and provide theoretical understanding of multimode nonlinear interaction in the superstrong coupling limit. This nonlinear superconducting electroacoustic system sheds light on the active control of multimode resonator systems and offers an enabling platform for the dynamic study of microcombs at microwave frequencies.
We present a nonlinear multimode superconducting electroacoustic system, where the interplay between superconducting kinetic inductance and piezoelectric strong coupling establishes an effective Kerr nonlinearity among multiple acoustic modes at 10 GHz that could hardly be achieved via intrinsic mechanical nonlinearity. By exciting this multimode Kerr system with a single microwave tone, we further demonstrate a coherent electroacoustic frequency comb and provide theoretical understanding of multimode nonlinear interaction in the superstrong coupling limit. This nonlinear superconducting electroacoustic system sheds light on the active control of multimode resonator systems and offers an enabling platform for the dynamic study of microcombs at microwave frequencies.
Precise control of mechanical modes in the quantum regime is a key resource for quantum technologies, offering promising pathways for quantum sensing with macroscopic systems and scalable architectures for quantum simulation. In this work, we realize a multimode mechanical cavity coupled to a superconducting Kerr resonator, which induces nonlinearity in the mechanical modes. The Kerr mode is realized by a flux-tunable superconducting quantum interference device (SQUID) array resonator, while the mechanical modes are implemented by a surface acoustic wave cavity. Both mechanical and electromagnetic modes are individually addressable via dedicated measurement lines, enabling full spectroscopic characterization. We introduce a straightforward protocol to measure the SQUID array resonator’s participation ratio in the hybrid acoustic modes, quantifying the degree of hybridization. The participation ratio reveals that our device operates at the onset of the multimode coupling regime, where multiple acoustic modes simultaneously interact with the nonlinear superconducting element. Furthermore, this platform allows controllable Kerr-type nonlinearities in multiple acoustic modes, with the participation ratio serving as the key parameter determining both the dissipation rates and nonlinear strengths of these hybridized modes. Close to the resonant regime, we measure a cross-Kerr interaction between seven pairs of mechanical modes, which is controllable via the SQUID array resonator detuning. Finally, we apply a two-photon parametric drive to the SQUID array resonator and observe the resulting parametric down-conversion and metastable state switching in a mechanical mode. These results establish a platform for engineering nonlinear multimode mechanical interactions, offering potential for future integration with superconducting qubits and implementation of multiple mechanical qubits.
High-frequency mechanical resonators subjected to low thermal phonon occupancy are easier to be prepared to the ground state by direct cryogenic cooling. Their extreme stiffness, however, poses a significant challenge for external interrogations. Here we demonstrate a superconducting cavity piezoelectromechanical system in which multiple modes of a bulk acoustic resonator oscillating at 10 GHz are coupled to a planar microwave superconducting resonator with a cooperativity exceeding 2×10^{3}, deep in the strong coupling regime. By implementation of the noncontact coupling scheme to reduce mechanical dissipation, the system exhibits excellent coherence characterized by a frequency-quality-factor product of 7.5×10^{15} Hz. Interesting dynamics of classical temporal oscillations of the microwave energy is observed, implying the coherent conversion between phonons and photons. The demonstrated high-frequency cavity piezoelectromechanics is compatible with superconducting qubits, representing an important step towards hybrid quantum systems.
Resonance-frequency fluctuations can limit the sensitivity and stability of superconducting microwave cavities used for qubit readout, optomechanical displacement sensing, and magnetic flux detection. Here, we demonstrate the suppression of resonance-frequency fluctuations by locking a noisy nonlinear superconducting microwave cavity to a strong pump tone. The Kerr nonlinearity of this system, whereby the resonance frequency depends on the intracavity field amplitude, gives rise to an intrinsic feedback mechanism that enables passive stabilization without active external feedback. Using two-tone spectroscopy, we experimentally characterize the intrinsic nonlinear feedback mechanism and investigate its temporal stability through Allan deviation analysis. The frequency fluctuations of the locked cavity mode are reduced by nearly two orders of magnitude, reaching the 1/f noise floor, without continuous frequency tracking or active control. Kerr locking provides a general approach for self-stabilizing nonlinear microwave resonators by suppressing low-frequency cavity noise while preserving sensitivity to signals outside the locking bandwidth. This approach may benefit a broad range of systems, including SQUID-based resonators, optomechanical devices, and parametric amplifiers.
The past 20 years has seen rapid developments in circuit quantum electrodynamics, where superconducting qubits and resonators are used to control and study quantum light-matter interaction at a fundamental level. The development of this field is strongly influenced by quantum information science and the prospect of realizing quantum computation, but also opens up opportunities for combinations of different physical systems and research areas. Superconducting circuits in the microwave domain offer a versatile platform for interfacing with other quantum systems thanks to strong nonlinearities and zero-point fluctuations, as well as flexibility in design and fabrication. Hybrid quantum systems based on circuit quantum electrodynamics could enable novel functionalities by exploiting the strengths of the individual components.This thesis covers experiments coupling superconducting circuits to surface acoustic waves (SAWs), mechanical waves propagating along the surface of a solid. Strong coupling can be engineered using the piezoelectric properties of GaAs substrates, and our experiments exploit this to investigate phenomena in quantum field-matter interaction. A key property of surface acoustic waves is the slow propagation speed, typically five orders of magnitude slower than light in vacuum, and the associated short wavelength. This enables the giant atom regime where the artificial atom in the form of a superconducting circuit is large compared to the wavelength of interacting SAW radiation, a condition which is difficult to realize in other systems. Experiments described in this thesis use these properties to demonstrate electromagnetically induced transparency for a mechanical mode, as well as non-Markovian interactions between an artificial giant atom and the SAW field. When the SAW field is confined to a resonant cavity, the short wavelength allows multimode spectra suitable for interacting with a frequency comb. We use a multimode SAW resonator to characterize the ensemble of microscopic two-level system defects with a two-tone spectroscopy approach. Finally, we introduce a hybrid superconducting-SAW resonator with applications in quantum information processing in mind. Experiments with this device demonstrate entanglement of SAW modes, and show promising results on the way to engineer cluster states for quantum computation in continuous variables.
Mechanical objects have important practical applications in the fields of quantum information and metrology as quantum memories or transducers for measuring and connecting different types of quantum systems. The field of electromechanics is in pursuit of a robust and highly coherent device that couples motion to nonlinear quantum objects such as superconducting qubits. Here, we experimentally demonstrate a high-frequency bulk acoustic wave resonator that is strongly coupled to a superconducting qubit using piezoelectric transduction with a cooperativity of 260. We measure qubit and mechanical coherence times on the order of 10 microseconds. Our device requires only simple fabrication methods and provides controllable access to a multitude of phonon modes. We demonstrate quantum control and measurement on gigahertz phonons at the single-quantum level.
Superconducting microresonators have diverse applications, including microwave kinetic inductance detectors, microwave superconducting quantum interference device multiplexers, and superconducting qubits. Arrays of such devices are typically addressed using microwave frequency combs with probe tones matched to individual device resonances. However, resonator frequency collisions caused by wafer non-uniformity and fabrication variations significantly limit usable device yields. In this Letter, we present a technique that mitigates these frequency collisions without the need for ex post facto processing. By leveraging nonlinear kinetic inductance and persistent current in a superconducting loop, we achieve in situ tuning of individual resonator frequencies within an array during device cooldown, effectively resolving frequency collisions in a way that is both highly flexible and reversible. We successfully demonstrate this technique by tuning a small array of four resonators to both identical frequencies and a uniformly spaced frequency comb. This in situ resonator tuning approach provides a universal solution for improving yield and multiplexing density in large resonator arrays, addressing a critical need for scaling up superconducting detector and qubit systems.