Kerr parametric oscillators (KPOs) have attracted increasing attention in terms of their application to quantum information processing and quantum simulations. The state preparation and measurement of KPOs are typical requirements when used as qubits. The methods previously proposed for state preparations of KPOs utilize modulation of external fields such as a pump and drive fields. We study the stochastic state preparation of stable coherent states of a KPO with homodyne detection, which does not require modulation of external fields, and thus can reduce experimental efforts and exclude unwanted effects of possible imperfection in control of external fields. We quantitatively show that the detection data, if averaged over an optimal averaging time to decrease the effect of measurement noise, has a strong correlation with the state of the KPO, and therefore can be used to estimate the state (stochastic state preparation). We examine the success probability of the state estimation taking into account the measurement noise and bit flips. Moreover, the proper range of the averaging time to realize a high success probability is obtained by developing a binomial-coherent-state model, which describes the stochastic dynamics of the KPO under homodyne detection.Kerr parametric oscillators (KPOs) have attracted increasing attention in terms of their application to quantum information processing and quantum simulations. The state preparation and measurement of KPOs are typical requirements when used as qubits. The methods previously proposed for state preparations of KPOs utilize modulation of external fields such as a pump and drive fields. We study the stochastic state preparation of stable coherent states of a KPO with homodyne detection, which does not require modulation of external fields, and thus can reduce experimental efforts and exclude unwanted effects of possible imperfection in control of external fields. We quantitatively show that the detection data, if averaged over an optimal averaging time to decrease the effect of measurement noise, has a strong correlation with the state of the KPO, and therefore can be used to estimate the state (stochastic state preparation). We examine the success probability of the state estimation taking into account the measurement noise and bit flips. Moreover, the proper range of the averaging time to realize a high success probability is obtained by developing a binomial-coherent-state model, which describes the stochastic dynamics of the KPO under homodyne detection.

Scientific ReportsJan 28, 20235 citations

Quantum State Tomography for Kerr Parametric Oscillators

Yuta Suzuki, Shiro Kawabata, Tsuyoshi Yamamoto +1 more

Kerr parametric oscillators (KPOs) implemented in the circuit quantum electrodynamic architecture can operate as qubits. Their applications to quantum annealing and universal quantum computation have been studied intensively. For these applications, the readout of the state of KPOs is of practical importance. We develop a scheme of state tomography for KPOs with reflection measurement. Although it is known that the reflection coefficient depends on the state of the KPO, it is unclear whether tomography of a qubit encoded into a KPO can be performed in a practical way mitigating decoherence during the measurement, and how accurate it is. We show that the reflection coefficient has a one-to-one correspondence with a diagonal element of the density matrix of the qubit when a probe frequency is properly chosen and an additional single-photon drive is introduced. Thus, our scheme offers a novel way to read out the qubit along an axis of the Bloch sphere, and therefore the reflection measurement and single-qubit gates can constitute state tomography.Kerr parametric oscillators (KPOs) implemented in the circuit quantum electrodynamic architecture can operate as qubits. Their applications to quantum annealing and universal quantum computation have been studied intensively. For these applications, the readout of the state of KPOs is of practical importance. We develop a scheme of state tomography for KPOs with reflection measurement. Although it is known that the reflection coefficient depends on the state of the KPO, it is unclear whether tomography of a qubit encoded into a KPO can be performed in a practical way mitigating decoherence during the measurement, and how accurate it is. We show that the reflection coefficient has a one-to-one correspondence with a diagonal element of the density matrix of the qubit when a probe frequency is properly chosen and an additional single-photon drive is introduced. Thus, our scheme offers a novel way to read out the qubit along an axis of the Bloch sphere, and therefore the reflection measurement and single-qubit gates can constitute state tomography.

arXiv:2212.14627Physical Review AppliedSep 14, 20237 citations

Fast Tunable Coupling Scheme of Kerr Parametric Oscillators Based on Shortcuts to Adiabaticity

Shumpei Masuda, Taro Kanao, Hayato Goto +3 more

Kerr parametric oscillators (KPOs), which can be implemented with superconducting parametrons possessing large Kerr nonlinearity, have been attracting much attention in terms of their applications to quantum annealing, universal quantum computation, and studies of quantum many-body systems. It is of practical importance for these studies to realize fast and accurate tunable coupling between KPOs in a simple manner. We develop a simple scheme of fast tunable coupling of KPOs with high tunability in speed and amplitude using the fast transitionless rotation of a KPO in the phase space based on the shortcuts to adiabaticity. Our scheme enables rapid switching of the effective coupling between KPOs, and can be implemented with always-on linear coupling between KPOs, by controlling the phase of the pump field and the resonance frequency of the KPO without controlling the amplitude of the pump field nor using additional drive fields and couplers. We apply the coupling scheme to a two-qubit gate, and show that our scheme realizes high gate fidelity compared with a purely adiabatic one, by mitigating undesired nonadiabatic transitions.Kerr parametric oscillators (KPOs), which can be implemented with superconducting parametrons possessing large Kerr nonlinearity, have been attracting much attention in terms of their applications to quantum annealing, universal quantum computation, and studies of quantum many-body systems. It is of practical importance for these studies to realize fast and accurate tunable coupling between KPOs in a simple manner. We develop a simple scheme of fast tunable coupling of KPOs with high tunability in speed and amplitude using the fast transitionless rotation of a KPO in the phase space based on the shortcuts to adiabaticity. Our scheme enables rapid switching of the effective coupling between KPOs, and can be implemented with always-on linear coupling between KPOs, by controlling the phase of the pump field and the resonance frequency of the KPO without controlling the amplitude of the pump field nor using additional drive fields and couplers. We apply the coupling scheme to a two-qubit gate, and show that our scheme realizes high gate fidelity compared with a purely adiabatic one, by mitigating undesired nonadiabatic transitions.

arXiv:2203.00226Physical Review AppliedSep 27, 202221 citations

Fast elementary gates for universal quantum computation with Kerr parametric oscillator qubits

Taro Kanao, Hayato Goto

Kerr parametric oscillators (KPOs) can stabilize the superpositions of coherent states, which can be utilized as qubits, and are promising candidates for realizing hardware-efficient quantum computers. Although elementary gates for universal quantum computation with KPO qubits have been proposed, these gates are usually based on adiabatic operations and thus need long gate times, which result in errors caused by photon loss in KPOs realized by, e.g., superconducting circuits. In this work we accelerate the elementary gates by experimentally feasible control methods, which are based on numerical optimization of pulse shapes for shortcuts to adiabaticity. By numerical simulations, we show that the proposed methods can achieve speedups compared to adiabatic ones by up to six times with high gate fidelities of 99.9%. These methods are thus expected to be useful for quantum computers with KPOs.Kerr parametric oscillators (KPOs) can stabilize the superpositions of coherent states, which can be utilized as qubits, and are promising candidates for realizing hardware-efficient quantum computers. Although elementary gates for universal quantum computation with KPO qubits have been proposed, these gates are usually based on adiabatic operations and thus need long gate times, which result in errors caused by photon loss in KPOs realized by, e.g., superconducting circuits. In this work we accelerate the elementary gates by experimentally feasible control methods, which are based on numerical optimization of pulse shapes for shortcuts to adiabaticity. By numerical simulations, we show that the proposed methods can achieve speedups compared to adiabatic ones by up to six times with high gate fidelities of 99.9%. These methods are thus expected to be useful for quantum computers with KPOs.

arXiv:2310.20108Physical Review ResearchFeb 22, 20247 citations

Three Strongly Coupled Kerr Parametric Oscillators Forming a Boltzmann Machine

Gabriel Margiani, Orjan Ameye, Oded Zilberberg +1 more

Coupled Kerr parametric oscillators (KPOs) are a promising resource for classical and quantum analog computation, for example to find the ground state of Ising Hamiltonians. Yet, the state space of strongly coupled KPO networks is very involved. As such, their phase diagram sometimes features either too few or too many states, including some that cannot be mapped to Ising spin configurations. This complexity makes it challenging to find and meet the conditions under which an analog optimization algorithm can be successful. Here, we demonstrate how to use three strongly coupled KPOs as a simulator for an Ising Hamiltonian, and estimate its ground state using a Boltzmann sampling measurement. While fully classical, our Letter is directly relevant for quantum systems operating on coherent states.Coupled Kerr parametric oscillators (KPOs) are a promising resource for classical and quantum analog computation, for example to find the ground state of Ising Hamiltonians. Yet, the state space of strongly coupled KPO networks is very involved. As such, their phase diagram sometimes features either too few or too many states, including some that cannot be mapped to Ising spin configurations. This complexity makes it challenging to find and meet the conditions under which an analog optimization algorithm can be successful. Here, we demonstrate how to use three strongly coupled KPOs as a simulator for an Ising Hamiltonian, and estimate its ground state using a Boltzmann sampling measurement. While fully classical, our Letter is directly relevant for quantum systems operating on coherent states.

arXiv:2504.04254Physical Review LettersJul 29, 20253 citations

Quantum Gate for a Kerr Nonlinear Parametric Oscillator Using Effective Excited States

Taro Kanao, Shumpei Masuda, Shiro Kawabata +1 more

A Kerr nonlinear parametric oscillator (KPO) can stabilize a quantum superposition of two coherent states with opposite phases, which can be used as a qubit. In a universal gate set for quantum computation with KPOs, an ${R}_{x}$ gate, which interchanges the two coherent states, is relatively hard to perform owing to the stability of the two states. We propose a method for a high-fidelity ${R}_{x}$ gate by exciting the KPO outside the qubit space with parity-selective transitions, which can be implemented by only adding a driving field. In this method, the utilization of higher effective excited states leads to a faster ${R}_{x}$ gate, rather than states near the qubit space. The proposed method can realize a continuous ${R}_{x}$ gate and thus is expected to be useful for, e.g., recently proposed variational quantum algorithms.A Kerr nonlinear parametric oscillator (KPO) can stabilize a quantum superposition of two coherent states with opposite phases, which can be used as a qubit. In a universal gate set for quantum computation with KPOs, an ${R}_{x}$ gate, which interchanges the two coherent states, is relatively hard to perform owing to the stability of the two states. We propose a method for a high-fidelity ${R}_{x}$ gate by exciting the KPO outside the qubit space with parity-selective transitions, which can be implemented by only adding a driving field. In this method, the utilization of higher effective excited states leads to a faster ${R}_{x}$ gate, rather than states near the qubit space. The proposed method can realize a continuous ${R}_{x}$ gate and thus is expected to be useful for, e.g., recently proposed variational quantum algorithms.

arXiv:2108.03091Physical Review AppliedJul 8, 202232 citations

{R}_{x}

gate, which interchanges the two coherent states, is relatively hard to perform owing to the stability of the two states. We propose a method for a high-fidelity

{R}_{x}

gate by exciting the KPO outside the qubit space with parity-selective transitions, which can be implemented by only adding a driving field. In this method, the utilization of higher effective excited states leads to a faster

{R}_{x}

gate, rather than states near the qubit space. The proposed method can realize a continuous

{R}_{x}

gate and thus is expected to be useful for, e.g., recently proposed variational quantum algorithms.