Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2208.01982 · Physical Review A

All-optical coherent quantum-noise cancellation in cascaded optomechanical systems

Jakob Schweer, Daniel Steinmeyer, Klemens Hammerer, M. Heurs

Published Sep 28, 2022• 7 citations
arXivHTMLPDF

Abstract

Coherent quantum-noise cancellation (CQNC) can be used in optomechanical sensors to surpass the standard quantum limit (SQL). In this paper, we investigate an optomechanical force sensor that uses the CQNC strategy by cascading the optomechanical system with an all-optical effective negative-mass oscillator. Specifically, we analyze matching conditions and losses and compare the two possible arrangements in which either the optomechanical or negative-mass system couples first to light. While both of these orderings yield a sub-SQL performance, we find that placing the effective negative-mass oscillator before the optomechanical sensor will always be advantageous for realistic parameters. The modular design of the cascaded scheme allows for better control of the subsystems by avoiding undesirable coupling between system components while maintaining a performance similar to the integrated configuration proposed earlier. We conclude our work with a case study of a micro-optomechanical implementation.

DOI
10.1103/physreva.106.033520

Related papers

A parameter-matched effective negative-mass oscillator for all-optical quantum noise cancellation

Nived Johny

Advances in precision optomechanical measurement underpin a wide range of technologies, from inertial sensors to the detection of gravitational waves and the exploration of fundamental physics. For such applications, the ultimate sensitivity is limited by quantum noise: shot noise, which stems from the stochastic arrival of photons, dominates at high frequencies, while Quantum Back-Action (QBA) noise—arising from the random radiation-pressure force exerted by the light field—prevails at low frequencies. The interplay between these two contributions defines the Standard Quantum Limit (SQL) of interferometry, a power-dependent trade-off that constrains further performance improvements. Although several sub-SQL techniques have been demonstrated, they typically enhance narrow-band sensitivity or require long filter cavities. Coherent Quantum Noise Cancellation (CQNC), first proposed by Tsang and Caves, offers a broadband solution by introducing an Effective Negative-Mass Oscillator (ENMO) that destructively interferes with the QBA noise across the entire spectrum except at the mechanical resonance of the opto-mechanically coupled system. A mathematically equivalent scheme for broadband QBA evasion has been demonstrated—for example, using atomic ensembles. The operation of this scheme is restricted to specific atomic transition wavelengths and is therefore unsuitable for many optomechanical platforms. This thesis reports the first all-optical, table-top realisation of an ENMO capable of Coherent Quantum Noise Cancellation in quantum optomechanical sensors. The scheme employs an optical analogue of the optomechanical interaction, generated through a combination of parametric down-conversion and beam-splitting processes, yielding a tunable, wavelength-flexible, and compact system. The achieved parameters satisfy the CQNC targets established in earlier theoretical work, and the current system predicts a broadband quantum-noise reduction of 3.6 dB (77% suppression of QBA noise(in dB)) at the frequency of maximum suppression. With further reduction of intracavity losses, the projected cancellation improves to 11.9 dB (81% suppression (in dB)). The experimental realisation features two polarisation-coupled optical resonators that host a two-mode squeezing interaction; the optical resonators possess distinct detunings and linewidths. The interdependent nature of the ENMO system motivated the development of an in-situ characterisation method, which is essential for integrating the ENMO with an optomechanical system in practical applications. Adequately addressing the system’s complexity required the development of five specialised experimental techniques for parameter tuning and comprehensive characterisation. Beyond quantum-noise cancellation, this system lends itself to application in quantum-information and quantum-communication tasks, including an on-demand, high-purity single-photon source and a quantum memory. Owing to the optical platform’s immunity to thermal decoherence, it can be operated at room temperature, and the parametric down-conversion process affords flexibility in wavelength selection. The results presented here advance the state of the art in broadband quantum noise reduction in a broad class of optomechanical devices, with immediate relevance for emerging quantum-technology applications.

•Jan 1, 2026•0 citations

Realization of an all-optical effective negative-mass oscillator for coherent quantum noise cancellation

Nived Johny, Jonas Junker, Bernd Schulte +3 more

We report the realization of an all-optical, tabletop effective-negative-mass oscillator (ENMO) scheme capable of canceling quantum noise when cascaded with an opto-mechanical sensor susceptible to (quantum) radiation pressure noise. Our coherent quantum noise cancellation (CQNC) scheme offers a broadband cancellation capability with a tunable, wavelength-flexible, and compact system. This is achieved through the implementation of an optical equivalent of an opto-mechanical interaction, facilitated by a down-conversion and a beam-splitting process. The intricate nature of the system and its multiple interacting components made characterizing the interdependent parameters with conventional methods ineffective, leading to the development of an in-situ characterization scheme. The obtained parameters meet the targets for CQNC set in previous studies. With our current realization, we project a broadband quantum noise reduction of 3.6 dB, corresponding to a 77% reduction in quantum back-action noise at the optimal frequency of maximum reduction, indicating the readiness of the ENMO for application. We discuss the prospects for new applications in quantum information and communication using the same platform.

quant-pharXiv:2511.08056•PRX Quantum•Nov 12, 2025•1 citation

Homodyne coherent quantum noise cancellation in a hybrid optomechanical force sensor

Hossein Allahverdi, Ali Motazedifard, Ali Dalafi +2 more

In this paper we propose an experimentally viable scheme to enhance the sensitivity of force detection in a hybrid optomechanical setup assisted by squeezed vacuum injection, beyond the standard quantum limit (SQL). The scheme is based on a combination of the coherent quantum noise cancellation (CQNC) strategy with a variational homodyne detection of the cavity output spectrum in which the phase of the local oscillator is optimized. In CQNC, realizing a negative-mass oscillator in the system leads to exact cancellation of the backaction noise from the mechanics due to destructive quantum interference. Squeezed vacuum injection enhances this cancellation and allows sub-SQL sensitivity to be reached in a wide frequency band and at much lower input laser powers. We show here that the adoption of variational homodyne readout enables us to enhance this noise cancellation up to $40\phantom{\rule{3.33333pt}{0ex}}\mathrm{dB}$ compared to the standard case of detection of the optical output phase quadrature, leading to a remarkable force sensitivity of the order of ${10}^{\ensuremath{-}19}\phantom{\rule{0.28em}{0ex}}\mathrm{N}/\sqrt{\mathrm{Hz}}$, about $70%$ enhancement compared to the standard case. Moreover, we show that at nonzero cavity detuning, the signal response can be amplified at a level three to five times larger than that in the standard case without variational homodyne readout, improving the signal-to-noise ratio. Finally, the variational readout CQNC developed in this paper may be applied to other optomechanical-like platforms such as levitated systems and multimode optomechanical arrays or crystals as well as Josephson-based optomechanical systems.

arXiv:2201.02592•Physical Review A•Aug 11, 2022•24 citations

Force sensing based on coherent quantum noise cancellation in a hybrid optomechanical cavity with squeezed-vacuum injection

Ali Motazedifard, F. Bemani, M. H. Naderi +2 more

We propose and analyse a feasible experimental scheme for a quantum force sensor based on the elimination of backaction noise through coherent quantum noise cancellation (CQNC) in a hybrid atom-cavity optomechanical setup assisted with squeezed vacuum injection. The force detector, which allows for a continuous, broadband detection of weak forces well below the standard quantum limit (SQL), is formed by a single optical cavity simultaneously coupled to a mechanical oscillator and to an ensemble of ultracold atoms. The latter acts as a negative-mass oscillator so that atomic noise exactly cancels the backaction noise from the mechanical oscillator due to destructive quantum interference. Squeezed vacuum injection enforces this cancellation and allows sub-SQL sensitivity to be reached in a very wide frequency band, and at much lower input laser powers.

arXiv:1603.09399•New Journal of Physics•Jul 22, 2016•123 citations

Enhanced weak force sensing based on atom-based coherent quantum noise cancellation in a hybrid cavity optomechanical system

S. K. Singh, Mojtaba Mazaheri, Jia‐Xin Peng +3 more

The weak force sensing based on a coherent quantum noise cancellation (CQNC) scheme is presented in a hybrid cavity optomechanical system containing a trapped ensemble of ultracold atoms and an optical parametric amplifier (OPA). In the proposed system, the back-action noise can be completely eliminated at all frequencies and through the proper choice of the OPA parameters, and the noise spectral density can also be reduced at lower frequencies. This leads to a significant enhancement in the sensitivity of the cavity optomechanical weak force sensor, and the noise spectral density also surpasses the standard quantum limit (SQL) even for the small input power at the lower detection frequency. Furthermore, the experimental feasibility of this scheme is also briefly discussed. This study can be used for the realization of a force sensor based on hybrid cavity optomechanical systems and for the coherent quantum control in macroscopic systems.

arXiv:2201.10805•Frontiers in Physics•Apr 7, 2023•43 citations

Atom-based coherent quantum-noise cancellation in optomechanics

Francesco Bariani, Hyojun Seok, Swati Singh +2 more

A design of a quantum force sensor is proposed to achieve coherent quantum noise cancellation (CQNC) by optically coupling a mesoscopic mechanical resonator to an ensemble of ultracold atoms, which has the specific advantage of allowing easy experimental realization of CQNC to reduce quantum noises below the standard quantum limit.

arXiv:1508.02322•Physical Review A•Oct 14, 2015•60 citations
Coherent quantum-noise cancellation (CQNC) can be used in optomechanical sensors to surpass the standard quantum limit (SQL). In this paper, we investigate an optomechanical force sensor that uses the CQNC strategy by cascading the optomechanical system with an all-optical effective negative-mass oscillator. Specifically, we analyze matching conditions and losses and compare the two possible arrangements in which either the optomechanical or negative-mass system couples first to light. While both of these orderings yield a sub-SQL performance, we find that placing the effective negative-mass oscillator before the optomechanical sensor will always be advantageous for realistic parameters. The modular design of the cascaded scheme allows for better control of the subsystems by avoiding undesirable coupling between system components while maintaining a performance similar to the integrated configuration proposed earlier. We conclude our work with a case study of a micro-optomechanical implementation.
Advances in precision optomechanical measurement underpin a wide range of technologies, from inertial sensors to the detection of gravitational waves and the exploration of fundamental physics. For such applications, the ultimate sensitivity is limited by quantum noise: shot noise, which stems from the stochastic arrival of photons, dominates at high frequencies, while Quantum Back-Action (QBA) noise—arising from the random radiation-pressure force exerted by the light field—prevails at low frequencies. The interplay between these two contributions defines the Standard Quantum Limit (SQL) of interferometry, a power-dependent trade-off that constrains further performance improvements. Although several sub-SQL techniques have been demonstrated, they typically enhance narrow-band sensitivity or require long filter cavities. Coherent Quantum Noise Cancellation (CQNC), first proposed by Tsang and Caves, offers a broadband solution by introducing an Effective Negative-Mass Oscillator (ENMO) that destructively interferes with the QBA noise across the entire spectrum except at the mechanical resonance of the opto-mechanically coupled system. A mathematically equivalent scheme for broadband QBA evasion has been demonstrated—for example, using atomic ensembles. The operation of this scheme is restricted to specific atomic transition wavelengths and is therefore unsuitable for many optomechanical platforms. This thesis reports the first all-optical, table-top realisation of an ENMO capable of Coherent Quantum Noise Cancellation in quantum optomechanical sensors. The scheme employs an optical analogue of the optomechanical interaction, generated through a combination of parametric down-conversion and beam-splitting processes, yielding a tunable, wavelength-flexible, and compact system. The achieved parameters satisfy the CQNC targets established in earlier theoretical work, and the current system predicts a broadband quantum-noise reduction of 3.6 dB (77% suppression of QBA noise(in dB)) at the frequency of maximum suppression. With further reduction of intracavity losses, the projected cancellation improves to 11.9 dB (81% suppression (in dB)). The experimental realisation features two polarisation-coupled optical resonators that host a two-mode squeezing interaction; the optical resonators possess distinct detunings and linewidths. The interdependent nature of the ENMO system motivated the development of an in-situ characterisation method, which is essential for integrating the ENMO with an optomechanical system in practical applications. Adequately addressing the system’s complexity required the development of five specialised experimental techniques for parameter tuning and comprehensive characterisation. Beyond quantum-noise cancellation, this system lends itself to application in quantum-information and quantum-communication tasks, including an on-demand, high-purity single-photon source and a quantum memory. Owing to the optical platform’s immunity to thermal decoherence, it can be operated at room temperature, and the parametric down-conversion process affords flexibility in wavelength selection. The results presented here advance the state of the art in broadband quantum noise reduction in a broad class of optomechanical devices, with immediate relevance for emerging quantum-technology applications.
We report the realization of an all-optical, tabletop effective-negative-mass oscillator (ENMO) scheme capable of canceling quantum noise when cascaded with an opto-mechanical sensor susceptible to (quantum) radiation pressure noise. Our coherent quantum noise cancellation (CQNC) scheme offers a broadband cancellation capability with a tunable, wavelength-flexible, and compact system. This is achieved through the implementation of an optical equivalent of an opto-mechanical interaction, facilitated by a down-conversion and a beam-splitting process. The intricate nature of the system and its multiple interacting components made characterizing the interdependent parameters with conventional methods ineffective, leading to the development of an in-situ characterization scheme. The obtained parameters meet the targets for CQNC set in previous studies. With our current realization, we project a broadband quantum noise reduction of 3.6 dB, corresponding to a 77% reduction in quantum back-action noise at the optimal frequency of maximum reduction, indicating the readiness of the ENMO for application. We discuss the prospects for new applications in quantum information and communication using the same platform.
In this paper we propose an experimentally viable scheme to enhance the sensitivity of force detection in a hybrid optomechanical setup assisted by squeezed vacuum injection, beyond the standard quantum limit (SQL). The scheme is based on a combination of the coherent quantum noise cancellation (CQNC) strategy with a variational homodyne detection of the cavity output spectrum in which the phase of the local oscillator is optimized. In CQNC, realizing a negative-mass oscillator in the system leads to exact cancellation of the backaction noise from the mechanics due to destructive quantum interference. Squeezed vacuum injection enhances this cancellation and allows sub-SQL sensitivity to be reached in a wide frequency band and at much lower input laser powers. We show here that the adoption of variational homodyne readout enables us to enhance this noise cancellation up to 40dB40\phantom{\rule{3.33333pt}{0ex}}\mathrm{dB}40dB compared to the standard case of detection of the optical output phase quadrature, leading to a remarkable force sensitivity of the order of ${10}^{\ensuremath{-}19}\phantom{\rule{0.28em}{0ex}}\mathrm{N}/\sqrt{\mathrm{Hz}}$, about 7070%70 enhancement compared to the standard case. Moreover, we show that at nonzero cavity detuning, the signal response can be amplified at a level three to five times larger than that in the standard case without variational homodyne readout, improving the signal-to-noise ratio. Finally, the variational readout CQNC developed in this paper may be applied to other optomechanical-like platforms such as levitated systems and multimode optomechanical arrays or crystals as well as Josephson-based optomechanical systems.
We propose and analyse a feasible experimental scheme for a quantum force sensor based on the elimination of backaction noise through coherent quantum noise cancellation (CQNC) in a hybrid atom-cavity optomechanical setup assisted with squeezed vacuum injection. The force detector, which allows for a continuous, broadband detection of weak forces well below the standard quantum limit (SQL), is formed by a single optical cavity simultaneously coupled to a mechanical oscillator and to an ensemble of ultracold atoms. The latter acts as a negative-mass oscillator so that atomic noise exactly cancels the backaction noise from the mechanical oscillator due to destructive quantum interference. Squeezed vacuum injection enforces this cancellation and allows sub-SQL sensitivity to be reached in a very wide frequency band, and at much lower input laser powers.
The weak force sensing based on a coherent quantum noise cancellation (CQNC) scheme is presented in a hybrid cavity optomechanical system containing a trapped ensemble of ultracold atoms and an optical parametric amplifier (OPA). In the proposed system, the back-action noise can be completely eliminated at all frequencies and through the proper choice of the OPA parameters, and the noise spectral density can also be reduced at lower frequencies. This leads to a significant enhancement in the sensitivity of the cavity optomechanical weak force sensor, and the noise spectral density also surpasses the standard quantum limit (SQL) even for the small input power at the lower detection frequency. Furthermore, the experimental feasibility of this scheme is also briefly discussed. This study can be used for the realization of a force sensor based on hybrid cavity optomechanical systems and for the coherent quantum control in macroscopic systems.