Abstract The study of quantum heat transport in superconducting circuits is significant for further understanding the connection between quantum mechanics and thermodynamics, and for possible applications for quantum information. The first experimental realisations of devices demonstrating photonic heat transport mediated by a qubit have already been designed and measured. Motivated by the analysis of such experimental results, and for future experimental designs, we numerically evaluate the photonic heat transport of qubit-resonator devices in the linear circuit regime through electromagnetic simulations using Sonnet software, and compare with microwave circuit theory. We show that the method is a powerful tool to calculate heat transport and predict unwanted parasitic resonances and background.
Abstract The study of quantum heat transport in superconducting circuits is significant for further understanding the connection between quantum mechanics and thermodynamics, and for possible applications for quantum information. The first experimental realisations of devices demonstrating photonic heat transport mediated by a qubit have already been designed and measured. Motivated by the analysis of such experimental results, and for future experimental designs, we numerically evaluate the photonic heat transport of qubit-resonator devices in the linear circuit regime through electromagnetic simulations using Sonnet software, and compare with microwave circuit theory. We show that the method is a powerful tool to calculate heat transport and predict unwanted parasitic resonances and background.
Superconducting microwave circuits are a ubiquitous and important tool for devices that exploit the phenomena of superconductivity and cryogenic temperatures as an environment for achieving the generation, manipulation, and detection of quantum states - required for the ongoing development of quantum technologies. In particular, superconducting circuits are a promising platform for the universal quantum computer, which will require an unprecedented density of quantum-coherent elements to perform large-scale quantum-enhanced calculations and simulations, using the framework of cavity quantum lectrodynamics.Dissipation and heat in these superconducting circuits is a key source of error and inefficiency, however the thermodynamics in this regime is poorly understood despite its increasing relevancy.This thesis describes the integration of superconducting resonators and artificial atoms derived from superconducting quantum circuits with ultra-sensitive bolometry, for looking at heat transport through superconducting circuits. We will describe the physics and operation of each of these elements, before combining and utilising them to perform heat transport measurements through a superconducting artificial atom coupled to two resonators, each terminated by a normal-metal mesoscopic resistor, with the resistor temperature measured and temperature gradients across the circuit induced by superconducting tunnel-probes. We will present tunable heat transport through this system, firstly when the resonators are symmetric, allowing us to observe the role of dissipation-limited coupling of the resonators to the artificial atom on the locality of the heat transport, then on an asymmetric system, demonstrating a directional rectification of the heat transport. Additionally, we will discuss how each element of the system can be individually characterised, in particular the quality factor of superconducting resonators in the highly-dissipative limit, by exploiting the superconducting transition to perform a background reference. It is suggested that this hybrid quantum system, and these initial experiments provide a promising platform in the emergent field of circuit quantum thermodynamics. We believe that the techniques and tools developed during this thesis present key steps towards the understanding of the thermodynamics of quantum circuits, towards the realisation of devices that can explore heat transport in the quantum limit, such as a quantum heat engine.
Quantum thermodynamics is emerging, both as a topic of fundamental research, but also as means to understand and potentially improve the performance of quantum devices. Superconducting circuit QED (Quantum Electro-Dynamics) presents a prominent platform for the necessary manipulation of quantum states. Thermalization of a quantum system, a subject of intense current interest, can be achieved by interfacing the circuit QED subsystem with a thermal reservoir of appropriate Hilbert dimensionality. In this context, we consider an assembly consisting of a superconducting qubit capacitively coupled between two nominally identical coplanar waveguide (CPW) resonators, each terminated by a normal-metal mesoscopic resistor. We report observation of tunable photonic heat transport through the resonator-qubit-resonator assembly. With the aid of a theoretical model presented here, we are able to reproduce experimental data. Importantly, the reservoir-to-reservoir heat flux depends on the interplay between the qubit-resonator and the resonator-reservoir couplings, yielding qualitatively dissimilar results in different coupling regimes. Our Quantum Heat Valve (QHV) is a technological prerequisite for the realisation of quantum heat engines and refrigerators, that can be obtained, e.g., by exploiting the time-domain dynamics and coherence of driven superconducting qubits. This effort would ultimately bridge the gap between the fields of quantum information and thermodynamics of mesoscopic systems.
We report an experimental realization of a three-terminal photonic heat transport device based on a superconducting quantum circuit. The central element of the device is a flux qubit made of a superconducting loop containing three Josephson junctions, which can be tuned by magnetic flux. It is connected to three resonators terminated by resistors. By heating one of the resistors and monitoring the temperatures of the other two, we determine photonic heat currents in the system and demonstrate their tunability by magnetic field at the level of 1 aW. We determine system parameters by performing microwave transmission measurements on a separate nominally identical sample and, in this way, demonstrate clear correlation between the level splitting of the qubit and the heat currents flowing through it. Our experiment is an important step towards realization of heat transistors, heat amplifiers, masers pumped by heat and other quantum heat transport devices.
The precise engineering of electromagnetic couplings is paramount for constructing scalable and high-fidelity superconducting quantum processors. While essential for orchestrating qubit operations, these couplings also present significant design challenges, including the mitigation of crosstalk and the management of environmental decoherence. A clear and unified theoretical framework is therefore crucial for the design, simulation, and analysis of these complex quantum circuits. This paper presents a comprehensive theoretical treatment of the fundamental electromagnetic coupling mechanisms in superconducting devices. Starting from first principles, we formulate the equations of motion and derive the input-output relations for canonical systems, including a single resonator coupled to a multi-port microwave network, interacting resonators, and coupled transmission lines. We review rigorous definitions for key parameters such as the energy decay rate (κ) and the dimensionless coupling coefficient (ζ) and connect these formalisms to practical methods of parameter extraction from electromagnetic simulations. This work provides a rigorous and pedagogical foundation for understanding and modeling linear electromagnetic interactions, serving as a vital resource for the development of advanced superconducting quantum hardware.
We compare two popular models applicable to analyzing heat transport by thermal microwave photons in quantum circuits. The first model is derived from a weak-coupling Lindblad master equation, with transition rates determined by Fermi's golden rule induced by thermal dissipation sources. The second approach employs a circuit model, where thermal Johnson-Nyquist noise generated by dissipative elements introduces currents, and consequently Joule power, in other parts of the circuit. This leads to a Landauer type expression of heat transport where the transmission coefficient is proportional to the transconductance in the circuit. We find that the two models yield identical results in a linear circuit in the weak coupling limit with an analytic expression of power in an archetypal circuit of a cavity mediating heat between two baths. Our analysis yields a quantitative assessment of the range of validity of the weak coupling assumption in a circuit. Due to the correspondence of the two results, we feel confident in applying the weak coupling Lindblad model also for analyzing heat transport in quantum circuits consisting, e.g. of qubits and/or non-linear resonators.
Superconducting circuits provide a controllable and versatile platform for studying quantum phenomena and advancing quantum technologies. Josephson junctions and resonators are the central circuit elements, as they enable the realization of macroscopic quantum systems—such as qubits—that can be conveniently controlled, probed, and integrated with non-superconducting components. The implementation of a thermal reservoir through the integration of a dissipative element, such as a normal-metal resistor, offers an experimental platform for investigating quantum thermodynamics, heat management in circuits, on-chip thermal detectors, and the realization of quantum thermal machines. In this thesis, we integrate a mesoscopic normal metal and its associated thermometers as an on-chip bolometer within circuit quantum electrodynamics devices for thermal detection and quantum thermodynamics experiments. The on-chip bolometer is utilized as a sensitive and broadband thermal spectrometer to characterize the properties of a superconducting resonator and to investigate its dominant loss channels. We demonstrate the capability of our thermal detector to resolve the resonator modes over a wide frequency range extending above 20 GHz. When two thermal baths are connected through a qubit–resonator system, a quantum heat valve can be realized. This device has been demonstrated using both transmon and flux qubits. Photonic heat transport between the two baths is controlled by tuning the qubit energy via an applied static magnetic field. To model these experiments, we propose an approach based on electromagnetic simulation and microwave circuit theory, restricted to the linear-response regime. Despite this limitation, the method successfully captures the experimental observations and provides a practical tool for analysing and designing circuits for future experiments. A periodically driven qubit coupled to two unequal resonators, each terminated by a heat reservoir, enables the realization of a quantum Otto refrigerator. The use of a transmon qubit for this purpose is limited by its weak anharmonicity. We therefore explore alternative platforms for the experimental implementation of a quantum refrigerator based on charge and flux qubits, which exhibit strong anharmonicity. As an important step, we perform experiments on a driven flux qubit galvanically coupled to a resonator that is, in turn, weakly capacitively coupled to a heat reservoir. We observe interference patterns in the heat current arising from driving-induced coherence. In particular, resonance peaks in the heat transferred to the bath appear at driving frequencies that are integer fractions of the resonator frequency. These quantum features are governed by the relative phase accumulated by the qubit states under driving.