We report a high-finesse bow-tie cavity designed for atomic physics experiments with Rydberg atom arrays. The cavity has a finesse of 51,000 and a waist of 7.1 μm at the cesium D2 line (852 nm). With these parameters, the cavity is expected to induce strong coupling between a single atom and a single photon, corresponding to a cooperativity per traveling mode of 35 at the cavity waist. To trap and image atoms, the cavity setup utilizes two in-vacuum aspheric lenses with a numerical aperture (NA) of 0.35 and is capable of housing NA = 0.5 microscope objectives. In addition, the large atom-mirror distance (≳1.5 cm) provides good optical access and minimizes stray electric fields at the position of the atoms. This cavity setup can operate in tandem with a Rydberg array platform, creating a fully connected system for quantum simulation and computation.
We report a high-finesse bow-tie cavity designed for atomic physics experiments with Rydberg atom arrays. The cavity has a finesse of 51,000 and a waist of 7.1 μm at the cesium D2 line (852 nm). With these parameters, the cavity is expected to induce strong coupling between a single atom and a single photon, corresponding to a cooperativity per traveling mode of 35 at the cavity waist. To trap and image atoms, the cavity setup utilizes two in-vacuum aspheric lenses with a numerical aperture (NA) of 0.35 and is capable of housing NA = 0.5 microscope objectives. In addition, the large atom-mirror distance (≳1.5 cm) provides good optical access and minimizes stray electric fields at the position of the atoms. This cavity setup can operate in tandem with a Rydberg array platform, creating a fully connected system for quantum simulation and computation.
We present the design and assembly of a cavity microscope for quantum simulations with ultracold atoms. The system integrates a high-finesse optical cavity with a pair of high-numerical aperture lenses sharing a common optical axis, enabling simultaneous operation with light close-to-atomic resonance. The system keeps the advantages of a rigid, single-block structure holding the lenses and cavity together, and improves over existing designs by using most of the solid angle left free by the cavity mode for imaging and atomic manipulation purposes. The cavity has a length of 19.786 mm, a finesse of 2.35 × 10 4 and operates 214 µm away from the concentric limit, deep in the strong coupling regime. The two lenses offer a numerical aperture of 0.52 each and maximal optical access in all directions transverse to the cavity axis, compatible with applications in quantum-gas microscopes, micro-tweezer arrays or few-fermions systems, as well as future cavity-assisted quantum simulation protocols demanding sub-cavity-mode control of the atom-cavity coupling.
Atom interferometers are among the most sensitive instruments for precision measurements and tests of fundamental physics. Their performance, however, is ultimately limited by quantum projection noise when uncorrelated atomic ensembles are employed. Cavity-assisted generation of entangled states has proven to be a promising route toward quantum-enhanced interferometry beyond the standard quantum limit. In this work, we present the realization and characterization of a monolithic bow-tie cavity developed to achieve a strong collective atom-light coupling with strontium atoms. Unlike conventional standing-wave Fabry-Pérot resonators, the traveling-wave geometry of the bow-tie cavity provides homogeneous atom-light coupling over the entire atomic ensemble, making it particularly suitable for entanglement-enhanced atom interferometry with freely falling atoms. The monolithic cavity architecture presents several scientifically relevant features such as high mechanical stability, high finesse, robustness against mirror misalignment, optical and atomic access and the option of generating squeezed states through different strategies. The cavity was realized for operation on the strontium (5s2)1S0−(5s5p)3P1 transition at 689 nm and achieves a finesse of F=5.7×104 while keeping the transmission of a single mirror sufficiently large to allow for efficient atomic information extraction. In this geometry, the cavity supports two foci with waists of 164 μm and 31 μm which gives access to different regimes of atom-cavity coupling. For ensembles containing up to 105 atoms, the cavity is expected to enable a Wineland squeezing parameter ξ2 of 24 dB through cavity-feedback squeezing, and 28 dB through quantum non-demolition measurements, demonstrating its potential as a platform for next-generation quantum-enhanced atom interferometers.
Scalable quantum computers and quantum networks require the combination of quantum processing nodes with efficient light-matter interfaces to distribute quantum information in local or long-distance quantum networks. Neutral-atom arrays have both been coupled to Rydberg states to enable high-fidelity quantum gates in universal processing architectures, and to optical cavities to realize interfaces to photons. However, combining these two capabilities and coupling atom arrays to highly excited Rydberg states in the mode of an optical cavity has been an outstanding challenge. Here we present a novel cavity-coupled Rydberg array that achieves this long-standing goal. We prepare, detect, and control individual atoms in a scalable optical tweezer array, couple them strongly to the optical mode of a high-finesse optical cavity and excite them in a controlled way to Rydberg states. We show that high-cooperativity coupling to an optical cavity -- demonstrated via the dispersive shift of the resonance of the cavity in presence of the atoms -- and strong Rydberg interactions -- demonstrated via the collective enhancement of Rydberg coupling in the atomic array -- can be achieved in our setup at the same spatial location. Our presented experimental platform opens the path to several new directions, including the realization of quantum network nodes, quantum simulation of long-range interacting, open quantum systems and photonic-state engineering leveraging high-fidelity Rydberg control.
From fundamental studies of light-matter interaction to applications in quantum networking and sensing, cavity quantum electrodynamics (QED) provides a platform-crossing toolbox to control interactions between atoms and photons. The coherence of such interactions is determined by the product of the single-pass atomic absorption and the number of photon round-trips. Reducing the cavity loss has enabled resonators supporting nearly 1-million optical roundtrips at the expense of severely limited optical material choices and increased alignment sensitivity. The single-pass absorption probability can be increased through the use of near-concentric, fiber or nanophotonic cavities, which reduce the mode waists at the expense of constrained optical access and exposure to surface fields. Here we present a new high numerical-aperture, lens-based resonator that pushes the single-atom-single-photon absorption probability per round trip close to its fundamental limit by reducing the mode size at the atom below a micron while keeping the atom mm-to-cm away from all optics. This resonator provides strong light-matter coupling in a cavity where the light circulates only ~ 10 times. We load a single 87Rb atom into such a cavity, observe strong coupling, demonstrate cavity-enhanced atom detection with imaging fidelity of 99.55(6) percent and survival probability of 99.89(4) percent in 130 microseconds, and leverage this new platform for a time-resolved exploration of cavity cooling. The resonator's loss-resilience paves the way to coupling of atoms to nonlinear and adaptive optical elements and provides a minimally invasive route to readout of defect centers. Introduction of intra-cavity imaging systems will enable the creation of cavity arrays compatible with Rydberg atom array computing technologies, vastly expanding the applicability of the cavity QED toolbox.
Cavity quantum electrodynamics (QED) is a powerful tool in quantum science, enabling preparation of nonclassical states of light and scalable entanglement of many atoms coupled to a single field mode. While the most coherent atom-photon interactions have been achieved using superconducting millimeter-wave cavities coupled to Rydberg atoms, these platforms so far lack the optical access required for trapping and addressing individual atomic qubits. We present a millimeter-wave Fabry-Pérot cavity with finesse 5.8 ( 1 ) × 10 7 at a temperature of 1 K providing generous transverse optical access (numerical aperture 0.56). Conflicting goals of strong atom-photon coupling and optical access motivate a near-confocal geometry. Close to confocality, however, postparaxial corrections to the cavity spectrum introduce unexpected degeneracies between transverse modes, leading to excess cavity loss. Modeling these corrections allows for tuning the cavity geometry to evade this loss, producing a high finesse that will enable cavity QED experiments with trapped atoms deep in the strong coupling regime.
Cavity quantum electrodynamic system with strongly coupled single atoms provides a good platform for studying quantum information processing, quantum simulation, quantum network, and distributed quantum computing. Cooling and trapping single atoms is a crucial technique in the quantum technology. At present, in a high-finesse cavity with finite space, cooling and trapping single atoms is a big challenge, even though it is a mature technique for free space. Great efforts have been made to cool and trap single atoms inside a cavity, and for a trapped atom its lifetime has reached as long as tens of seconds. Developing a more flexible method of cooling and trapping single atoms in a cavity is still essential for a strongly coupled cavity quantum electrodynamic system. In this work, we demonstrate experimentally that a single cesium atom in a cavity can be trapped by utilizing a single optical tweezer settled in cavity mode, and its lifetime is (2.60 ± 0.18) s. The experiment is carried out in a Fabry-Perot cavity, which is assembled by two concave mirrors each with a curvature radius of 100 mm, and cavity length of 335 μm. The concave surfaces are highly reflective, and the cavity has a finesse of 6.1 × 104. The 1080 nm optical tweezer with a waist of 2 μm is formed by an achromatic lens group with a numerical aperture of 0.4. At first, the precooled atomic assemble released from the magneto-optical trap (MOT) is transferred into cavity mode by an optical dipole trap with a waist of 36 μm. Then, one of the successfully transferred atoms is captured by the optical tweezer with the aid of cavity cooling mechanism. A blue detuned cavity locking laser is used as a standing-wave optical trap along the cavity axis. The signal of successfully trapped one atom is obtained by recording transmission of the cavity that will decrease owing to the strong coupling induced vacuum Rabi splitting. Finally, we demonstrate the precise manipulation of the atom-cavity coupling strength, which is achieved by scanning the position of the trapped atom step by step by using a high-precision translation stage. The system realized in this work can be used to study the dynamics of single atom-photon interactions with adjustable coupling strength. In addition, the mechanism adopted in this work is compatible with constructing tweezer arrays inside cavity mode, and thus possesses more flexibility and great potentials in cavity-based quantum entanglement and quantum simulation.