Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2207.05586 · Physical review. B./Physical review. B

Photonic heat transport from weak to strong coupling

Minh Tam, George Thomas, Dmitry S. Golubev

Published Mar 28, 2023• 0 citations
arXivHTMLPDF

Abstract

Superconducting circuits provide a favorable platform for quantum thermodynamic experiments. An important component for such experiments is a heat valve, i.e., a device which allows one to control the heat power flowing through the system. Here we theoretically study the heat valve based on a superconducting quantum interference device (SQUID) coupled to two heat baths via two resonators. The heat current in such a system can be tuned by magnetic flux. We investigate how the heat current modulation depends on the coupling strength $g$ between the SQUID and the resonators. In the weak coupling regime the heat current modulation grows as ${g}^{2}$, but, surprisingly, at the intermediate coupling it can be strongly suppressed. This effect is linked to the resonant nature of the heat transport at weak coupling, where the heat current dependence on the magnetic flux is a periodic set of narrow peaks. At the intermediate coupling the peaks become broader and overlap, thus reducing the heat modulation. At very strong coupling the heat modulation grows again and finally saturates at a constant value.

DOI
10.1103/physrevb.107.104518

Related papers

Quantum heat valve and entanglement in superconducting LC resonators

Yu‐qiang Liu, Yi‐jia Yang, Ting-ting Ma +1 more

Quantum superconducting circuit with flexible coupler has been a powerful platform for designing quantum thermal machines. In this Letter, we employ the tunable coupling of two superconducting resonators to realize a heat valve by modulating magnetic flux using a superconducting quantum interference device. It is shown that a heat valve can be realized in a wide parameter range. We find a consistent relation between the heat current and quantum entanglement, which indicates the dominant role of entanglement on the heat valve. It provides an insightful understanding of quantum features in quantum heat machines.

arXiv:2309.11467•Applied Physics Letters•Oct 2, 2023•8 citations

Strong-coupling quantum thermodynamics using a superconducting flux qubit

Rishabh Upadhyay, Bayan Karimi, Diego Subero +4 more

Thermodynamics in quantum circuits aims to find improved functionalities of thermal machines, highlight fundamental phenomena peculiar to quantum nature in thermodynamics, and point out limitations in quantum information processing due to the coupling of the system to its environment. An important aspect in achieving some of these goals is the regime of strong coupling, which has remained until now a domain of theoretical works only. Our aim is to demonstrate strong coupling features in heat transport using a superconducting flux qubit, which is capable of reaching strong- to deep-ultrastrong-coupling regimes, as shown in previous studies. Here, we show experimental evidence of strong coupling by observing a hybridized state of the qubit with two cavities coupled to it, leading to a triplet-like thermal transport via this combined system around the minimum energy of the qubit at power levels of tens of femtowatts, exceeding by an order of magnitude those in earlier experiments. We also demonstrate a nearly 100% on-off switching ratio of heat current mediated by photons by applying magnetic flux to the qubit. Our experiment opens a way towards testing debated questions in strong-coupling thermodynamics, such as what heat is in this regime. We also present a theoretical model that aligns with our experimental findings and explains the mechanism behind heat transport in our device. Furthermore, our experiment opens possibilities for quantum thermodynamics, aiming to realize true quantum heat engines and refrigerators with enhanced power and efficiency, by leveraging ultrastrong coupling between the system and its environment in future experiments.

arXiv:2411.10774•Physical Review Applied•Feb 10, 2026•2 citations

Realisation of a quantum heat valve

Alberto Ronzani, Bayan Karimi, Jorden Senior +4 more

Quantum thermodynamics is emerging, both as a topic of fundamental research, but also as means to understand and potentially improve the performance of quantum devices. Superconducting circuit QED (Quantum Electro-Dynamics) presents a prominent platform for the necessary manipulation of quantum states. Thermalization of a quantum system, a subject of intense current interest, can be achieved by interfacing the circuit QED subsystem with a thermal reservoir of appropriate Hilbert dimensionality. In this context, we consider an assembly consisting of a superconducting qubit capacitively coupled between two nominally identical coplanar waveguide (CPW) resonators, each terminated by a normal-metal mesoscopic resistor. We report observation of tunable photonic heat transport through the resonator-qubit-resonator assembly. With the aid of a theoretical model presented here, we are able to reproduce experimental data. Importantly, the reservoir-to-reservoir heat flux depends on the interplay between the qubit-resonator and the resonator-reservoir couplings, yielding qualitatively dissimilar results in different coupling regimes. Our Quantum Heat Valve (QHV) is a technological prerequisite for the realisation of quantum heat engines and refrigerators, that can be obtained, e.g., by exploiting the time-domain dynamics and coherence of driven superconducting qubits. This effort would ultimately bridge the gap between the fields of quantum information and thermodynamics of mesoscopic systems.

•Jan 28, 2018•1 citation

Photonic heat transport in three terminal superconducting circuit

Azat R. Gubaydullin, GEORGE M. THOMAS, Dmitry S. Golubev +3 more

We report an experimental realization of a three-terminal photonic heat transport device based on a superconducting quantum circuit. The central element of the device is a flux qubit made of a superconducting loop containing three Josephson junctions, which can be tuned by magnetic flux. It is connected to three resonators terminated by resistors. By heating one of the resistors and monitoring the temperatures of the other two, we determine photonic heat currents in the system and demonstrate their tunability by magnetic field at the level of 1 aW. We determine system parameters by performing microwave transmission measurements on a separate nominally identical sample and, in this way, demonstrate clear correlation between the level splitting of the qubit and the heat currents flowing through it. Our experiment is an important step towards realization of heat transistors, heat amplifiers, masers pumped by heat and other quantum heat transport devices.

arXiv:2112.09224•Nature Communications•Mar 23, 2022•38 citations

Thermal sensing for quantum thermodynamics experiments on superconducting circuits

Christoforus Dimas Satrya

Superconducting circuits provide a controllable and versatile platform for studying quantum phenomena and advancing quantum technologies. Josephson junctions and resonators are the central circuit elements, as they enable the realization of macroscopic quantum systems—such as qubits—that can be conveniently controlled, probed, and integrated with non-superconducting components. The implementation of a thermal reservoir through the integration of a dissipative element, such as a normal-metal resistor, offers an experimental platform for investigating quantum thermodynamics, heat management in circuits, on-chip thermal detectors, and the realization of quantum thermal machines. In this thesis, we integrate a mesoscopic normal metal and its associated thermometers as an on-chip bolometer within circuit quantum electrodynamics devices for thermal detection and quantum thermodynamics experiments. The on-chip bolometer is utilized as a sensitive and broadband thermal spectrometer to characterize the properties of a superconducting resonator and to investigate its dominant loss channels. We demonstrate the capability of our thermal detector to resolve the resonator modes over a wide frequency range extending above 20 GHz. When two thermal baths are connected through a qubit–resonator system, a quantum heat valve can be realized. This device has been demonstrated using both transmon and flux qubits. Photonic heat transport between the two baths is controlled by tuning the qubit energy via an applied static magnetic field. To model these experiments, we propose an approach based on electromagnetic simulation and microwave circuit theory, restricted to the linear-response regime. Despite this limitation, the method successfully captures the experimental observations and provides a practical tool for analysing and designing circuits for future experiments. A periodically driven qubit coupled to two unequal resonators, each terminated by a heat reservoir, enables the realization of a quantum Otto refrigerator. The use of a transmon qubit for this purpose is limited by its weak anharmonicity. We therefore explore alternative platforms for the experimental implementation of a quantum refrigerator based on charge and flux qubits, which exhibit strong anharmonicity. As an important step, we perform experiments on a driven flux qubit galvanically coupled to a resonator that is, in turn, weakly capacitively coupled to a heat reservoir. We observe interference patterns in the heat current arising from driving-induced coherence. In particular, resonance peaks in the heat transferred to the bath appear at driving frequencies that are integer fractions of the resonator frequency. These quantum features are governed by the relative phase accumulated by the qubit states under driving.

•Jan 1, 2026•0 citations

Modulation of Steady-State Heat Transport in a Dissipative Multi-Mode Qubit-Photon System

Ze-Huan Chen, Feiyu Wang, Hua Chen +2 more

Quantum heat transport is considered as an indispensable branch of quantum thermodynamics to potentially improve performance of thermodynamic devices. We theoretically propose a dissipative qubit-photon system composed of multiple coupled resonators interacting with a single two-level qubit, to explore the steady-state heat transport by tuning both the inter-resonator photon hopping and the qubit-photon coupling. Specifically in the three-mode case, the dramatic enhancement and suppression of the heat current into the central resonator can be modulated by the corresponding frequency, compared to the currents into two edge resonators. Moreover, fruitful cycle current components are unraveled at weak qubit-photon coupling, which are crucial to exhibit the nonmonotonic feature with increase of the reservoir temperature bias. In the one-dimensional case under the mean-field framework, the influence of the photon hopping on heat transport is analyzed. The steady-state heat current is comparatively enhanced to the single-mode limit at weak qubit-photon coupling, stemming from the nonvanishing mean-field photon excitation parameter and the additional cycle current component. We hope these obtained results may have possible applications in quantum thermodynamic manipulation and energy harvesting.

Chinese Physics Letters•Mar 29, 2023•7 citations
Superconducting circuits provide a favorable platform for quantum thermodynamic experiments. An important component for such experiments is a heat valve, i.e., a device which allows one to control the heat power flowing through the system. Here we theoretically study the heat valve based on a superconducting quantum interference device (SQUID) coupled to two heat baths via two resonators. The heat current in such a system can be tuned by magnetic flux. We investigate how the heat current modulation depends on the coupling strength ggg between the SQUID and the resonators. In the weak coupling regime the heat current modulation grows as g2{g}^{2}g2, but, surprisingly, at the intermediate coupling it can be strongly suppressed. This effect is linked to the resonant nature of the heat transport at weak coupling, where the heat current dependence on the magnetic flux is a periodic set of narrow peaks. At the intermediate coupling the peaks become broader and overlap, thus reducing the heat modulation. At very strong coupling the heat modulation grows again and finally saturates at a constant value.
Quantum superconducting circuit with flexible coupler has been a powerful platform for designing quantum thermal machines. In this Letter, we employ the tunable coupling of two superconducting resonators to realize a heat valve by modulating magnetic flux using a superconducting quantum interference device. It is shown that a heat valve can be realized in a wide parameter range. We find a consistent relation between the heat current and quantum entanglement, which indicates the dominant role of entanglement on the heat valve. It provides an insightful understanding of quantum features in quantum heat machines.
Thermodynamics in quantum circuits aims to find improved functionalities of thermal machines, highlight fundamental phenomena peculiar to quantum nature in thermodynamics, and point out limitations in quantum information processing due to the coupling of the system to its environment. An important aspect in achieving some of these goals is the regime of strong coupling, which has remained until now a domain of theoretical works only. Our aim is to demonstrate strong coupling features in heat transport using a superconducting flux qubit, which is capable of reaching strong- to deep-ultrastrong-coupling regimes, as shown in previous studies. Here, we show experimental evidence of strong coupling by observing a hybridized state of the qubit with two cavities coupled to it, leading to a triplet-like thermal transport via this combined system around the minimum energy of the qubit at power levels of tens of femtowatts, exceeding by an order of magnitude those in earlier experiments. We also demonstrate a nearly 100% on-off switching ratio of heat current mediated by photons by applying magnetic flux to the qubit. Our experiment opens a way towards testing debated questions in strong-coupling thermodynamics, such as what heat is in this regime. We also present a theoretical model that aligns with our experimental findings and explains the mechanism behind heat transport in our device. Furthermore, our experiment opens possibilities for quantum thermodynamics, aiming to realize true quantum heat engines and refrigerators with enhanced power and efficiency, by leveraging ultrastrong coupling between the system and its environment in future experiments.
Quantum thermodynamics is emerging, both as a topic of fundamental research, but also as means to understand and potentially improve the performance of quantum devices. Superconducting circuit QED (Quantum Electro-Dynamics) presents a prominent platform for the necessary manipulation of quantum states. Thermalization of a quantum system, a subject of intense current interest, can be achieved by interfacing the circuit QED subsystem with a thermal reservoir of appropriate Hilbert dimensionality. In this context, we consider an assembly consisting of a superconducting qubit capacitively coupled between two nominally identical coplanar waveguide (CPW) resonators, each terminated by a normal-metal mesoscopic resistor. We report observation of tunable photonic heat transport through the resonator-qubit-resonator assembly. With the aid of a theoretical model presented here, we are able to reproduce experimental data. Importantly, the reservoir-to-reservoir heat flux depends on the interplay between the qubit-resonator and the resonator-reservoir couplings, yielding qualitatively dissimilar results in different coupling regimes. Our Quantum Heat Valve (QHV) is a technological prerequisite for the realisation of quantum heat engines and refrigerators, that can be obtained, e.g., by exploiting the time-domain dynamics and coherence of driven superconducting qubits. This effort would ultimately bridge the gap between the fields of quantum information and thermodynamics of mesoscopic systems.
We report an experimental realization of a three-terminal photonic heat transport device based on a superconducting quantum circuit. The central element of the device is a flux qubit made of a superconducting loop containing three Josephson junctions, which can be tuned by magnetic flux. It is connected to three resonators terminated by resistors. By heating one of the resistors and monitoring the temperatures of the other two, we determine photonic heat currents in the system and demonstrate their tunability by magnetic field at the level of 1 aW. We determine system parameters by performing microwave transmission measurements on a separate nominally identical sample and, in this way, demonstrate clear correlation between the level splitting of the qubit and the heat currents flowing through it. Our experiment is an important step towards realization of heat transistors, heat amplifiers, masers pumped by heat and other quantum heat transport devices.
Superconducting circuits provide a controllable and versatile platform for studying quantum phenomena and advancing quantum technologies. Josephson junctions and resonators are the central circuit elements, as they enable the realization of macroscopic quantum systems—such as qubits—that can be conveniently controlled, probed, and integrated with non-superconducting components. The implementation of a thermal reservoir through the integration of a dissipative element, such as a normal-metal resistor, offers an experimental platform for investigating quantum thermodynamics, heat management in circuits, on-chip thermal detectors, and the realization of quantum thermal machines. In this thesis, we integrate a mesoscopic normal metal and its associated thermometers as an on-chip bolometer within circuit quantum electrodynamics devices for thermal detection and quantum thermodynamics experiments. The on-chip bolometer is utilized as a sensitive and broadband thermal spectrometer to characterize the properties of a superconducting resonator and to investigate its dominant loss channels. We demonstrate the capability of our thermal detector to resolve the resonator modes over a wide frequency range extending above 20 GHz. When two thermal baths are connected through a qubit–resonator system, a quantum heat valve can be realized. This device has been demonstrated using both transmon and flux qubits. Photonic heat transport between the two baths is controlled by tuning the qubit energy via an applied static magnetic field. To model these experiments, we propose an approach based on electromagnetic simulation and microwave circuit theory, restricted to the linear-response regime. Despite this limitation, the method successfully captures the experimental observations and provides a practical tool for analysing and designing circuits for future experiments. A periodically driven qubit coupled to two unequal resonators, each terminated by a heat reservoir, enables the realization of a quantum Otto refrigerator. The use of a transmon qubit for this purpose is limited by its weak anharmonicity. We therefore explore alternative platforms for the experimental implementation of a quantum refrigerator based on charge and flux qubits, which exhibit strong anharmonicity. As an important step, we perform experiments on a driven flux qubit galvanically coupled to a resonator that is, in turn, weakly capacitively coupled to a heat reservoir. We observe interference patterns in the heat current arising from driving-induced coherence. In particular, resonance peaks in the heat transferred to the bath appear at driving frequencies that are integer fractions of the resonator frequency. These quantum features are governed by the relative phase accumulated by the qubit states under driving.
Quantum heat transport is considered as an indispensable branch of quantum thermodynamics to potentially improve performance of thermodynamic devices. We theoretically propose a dissipative qubit-photon system composed of multiple coupled resonators interacting with a single two-level qubit, to explore the steady-state heat transport by tuning both the inter-resonator photon hopping and the qubit-photon coupling. Specifically in the three-mode case, the dramatic enhancement and suppression of the heat current into the central resonator can be modulated by the corresponding frequency, compared to the currents into two edge resonators. Moreover, fruitful cycle current components are unraveled at weak qubit-photon coupling, which are crucial to exhibit the nonmonotonic feature with increase of the reservoir temperature bias. In the one-dimensional case under the mean-field framework, the influence of the photon hopping on heat transport is analyzed. The steady-state heat current is comparatively enhanced to the single-mode limit at weak qubit-photon coupling, stemming from the nonvanishing mean-field photon excitation parameter and the additional cycle current component. We hope these obtained results may have possible applications in quantum thermodynamic manipulation and energy harvesting.