Perturbation theory, used in a wide range of fields, is a powerful tool for approximate solutions to complex problems, starting from the exact solution of a related, simpler problem. Advances in quantum computing, especially over the past several years, provide opportunities for alternatives to classical methods. Here, we present a general quantum circuit estimating both the energy and eigenstates corrections that is far superior to the classical version when estimating second-order energy corrections. We demonstrate our approach as applied to the two-site extended Hubbard model. In addition to numerical simulations based on qiskit, results on IBM's quantum hardware are also presented. Our work offers a general approach to studying complex systems with quantum devices, with no training or optimization process needed to obtain the perturbative terms, which can be generalized to other Hamiltonian systems both in chemistry and physics.
Perturbation theory, used in a wide range of fields, is a powerful tool for approximate solutions to complex problems, starting from the exact solution of a related, simpler problem. Advances in quantum computing, especially over the past several years, provide opportunities for alternatives to classical methods. Here, we present a general quantum circuit estimating both the energy and eigenstates corrections that is far superior to the classical version when estimating second-order energy corrections. We demonstrate our approach as applied to the two-site extended Hubbard model. In addition to numerical simulations based on qiskit, results on IBM's quantum hardware are also presented. Our work offers a general approach to studying complex systems with quantum devices, with no training or optimization process needed to obtain the perturbative terms, which can be generalized to other Hamiltonian systems both in chemistry and physics.
Perturbation theory (PT) might be one of the most powerful and fruitful tools for both physicists and chemists, which has led to a wide variety of applications. Over the past decades, advances in quantum computing provide opportunities for alternatives to classical methods. Recently, a general quantum circuit estimating the low order PT corrections has been proposed. In this article, we revisit the quantum circuits for PT calculations, and develop the methods for higher order PT corrections of eigenenergy, especially the 3rd and 4th order corrections. We present the feasible quantum circuit to estimate each term in these PT corrections. There are two the fundamental operations in the proposed circuit. One approximates the perturbation terms, the other approximates the inverse of unperturbed energy difference. The proposed method can be generalized to higher order PT corrections.
Accurate electronic structure calculations might be one of the most anticipated applications of quantum computing.The recent landscape of quantum simulations within the Hartree-Fock approximation raises the prospect of substantial theory and hardware developments in this context.Here we propose a general quantum circuit for Møller-Plesset perturbation theory (MPPT) calculations, which is a popular and powerful post-Hartree-Fock method widly harnessed in solving electronic structure problems. MPPT improves on the Hartree-Fock method by including electron correlation effects wherewith Rayleigh-Schrodinger perturbation theory. Given the Hartree-Fock results, the proposed circuit is designed to estimate the second order energy corrections with MPPT methods. In addition to demonstration of the theoretical scheme, the proposed circuit is further employed to calculate the second order energy correction for the ground state of Helium atom, and the total error rate is around 2.3%. Experiments on IBM 27-qubit quantum computers express the feasibility on near term quantum devices, and the capability to estimate the second order energy correction accurately. In imitation of the classical MPPT, our approach is non-heuristic, guaranteeing that all parameters in the circuit are directly determined by the given Hartree-Fock results. Moreover, the proposed circuit shows a potential quantum speedup comparing to the traditional MPPT calculations. Our work paves the way forward the implementation of more intricate post-Hartree-Fock methods on quantum hardware, enriching the toolkit solving electronic structure problems on quantum computing platforms.
Quantum computation is one of the most promising new paradigms for the simulation of physical systems composed of electrons and atomic nuclei, with applications in chemistry, solid-state physics, materials science, and molecular biology. This requires a truncated representation of the electronic structure Hamiltonian using a finite number of orbitals. While it is, in principle, obvious how to improve on the representation by including more orbitals, this is usually unfeasible in practice (e.g., because of the limited number of qubits available) and severely compromises the accuracy of the obtained results. Here, we propose a quantum algorithm that improves on the representation of the physical problem by virtue of second-order perturbation theory. In particular, our quantum algorithm evaluates the second-order energy correction through a series of time-evolution steps under the unperturbed Hamiltonian. An important application is to go beyond the active-space approximation, allowing to include corrections of virtual orbitals, known as multireference perturbation theory. Here, we exploit the fact that the unperturbed Hamiltonian is diagonal for virtual orbitals and show that the number of qubits is independent of the number of virtual orbitals. This gives rise to more accurate energy estimates without increasing the number of qubits. Moreover, we demonstrate numerically for realistic chemical systems that the total runtime has highly favorable scaling in the number of virtual orbitals compared to previous studies. Numerical calculations confirm the necessity of the multireference perturbation theory energy corrections to reach accurate ground-state energy estimates. Our perturbation theory quantum algorithm can also be applied to symmetry-adapted perturbation theory. As such, we demonstrate that perturbation theory can help to reduce the quantum hardware requirements for quantum chemistry. Published by the American Physical Society 2024
Quantum chemistry models atoms and molecules using quantum mechanics, with the electronic structure problem at its core. This problem, which determines the energy and properties of electrons in a molecule, is exponentially hard to solve exactly on classical computers. To approximate solutions, effective models introduce layers of simplifications. However, these approximations can fail for strongly correlated systems, necessitating alternative approaches. Quantum computers, capable of processing quantum information natively, offer a promising path to simulate molecular systems beyond classical reach, with potential applications in catalysis, materials science, and photochemistry. Despite rapid advancements in quantum hardware, practical quantum computations remain challenging due to limited resources. This thesis optimizes quantum resource usage in computational chemistry, introducing novel embedding techniques and exploring applications beyond ground-state energies. Chapter 1 establishes the foundation by reviewing quantum chemistry methods, from Hartree-Fock and Density Functional Theory (DFT) to active space approaches. It also provides an introduction to quantum computing for chemistry, focusing on near-term algorithms. The following chapters present novel methods aimed at reducing quantum resource requirements and tackling problems classical methods struggle with. Chapter 2 introduces a technique to reduce the λ-norm of the electronic structure Hamiltonian, a key measure of quantum resource demand. By transforming molecular orbitals, this method enhances sampling efficiency in Noisy Intermediate-Scale Quantum (NISQ) algorithms and reduces runtime in Fault-Tolerant Quantum Computing (FTQC). Localized orbitals outperform canonical ones, and an orbital-optimization scheme is proposed to minimize the λ-norm. Benchmarks on hydrogen chains, FeMoco, and Ruthenium complexes demonstrate its effectiveness. Chapter 3 presents the FragPT2 framework for simulating large systems with multiple interacting fragments. This method embeds each fragment in the mean field of others and applies multi-reference perturbation theory to capture inter-fragment correlations such as dispersion and charge transfer efficiently. The approach reduces computational overhead and enables scalable simulations, as shown in applications to \ce{N2} dimers, aromatic dimers, and butadiene. Chapter 4 focuses on photochemical systems, where multiple electronic states must be treated equally. The state-averaged orbital-optimized variational quantum eigensolver (SAOOVQE) is extended with analytical energy gradients and non-adiabatic couplings, enabling geometry optimizations and simulations of non-adiabatic dynamics on quantum hardware. This is demonstrated by locating the conical intersection in formaldimine, highlighting SAOOVQE’s potential for studying photoisomerization in biomolecules. Building on this, Chapter 5 develops a quantum algorithm to detect conical intersections, where the Born-Oppenheimer approximation breaks down. These intersections are characterized by a discrete Berry phase (0 or π), representing their topological nature. The algorithm extracts this phase as a single bit of information, ensuring resilience to noise. Analytical proof and numerical validation using a toy molecular model illustrate its effectiveness for studying light-perception biochemistry and related photochemical processes. Finally, Chapter 6 explores machine learning density functionals trained on noisy quantum data. While DFT is computationally efficient, its accuracy depends on approximated exchange-correlation functionals. This work proposes a neural network-based approach to learn the exact functional from quantum data, showing that training on noisy outputs from NISQ devices can mitigate sampling errors. Applications to the Fermi-Hubbard model and other systems demonstrate its potential to generalize and provide accurate results under noise. This thesis advances quantum computational chemistry by optimizing quantum resource usage, developing new embedding strategies, and expanding the scope of quantum simulations beyond ground-state properties. These contributions pave the way for practical quantum algorithms that could revolutionize molecular simulations in the near future.
Approximation based on perturbation theory is the foundation for most of the quantitative predictions of quantum mechanics, whether in quantum many-body physics, chemistry, quantum field theory, or other domains. Quantum computing provides an alternative to the perturbation paradigm, yet state-of-the-art quantum processors with tens of noisy qubits are of limited practical utility. Here, we introduce perturbative quantum simulation, which combines the complementary strengths of the two approaches, enabling the solution of large practical quantum problems using limited noisy intermediate-scale quantum hardware. The use of a quantum processor eliminates the need to identify a solvable unperturbed Hamiltonian, while the introduction of perturbative coupling permits the quantum processor to simulate systems larger than the available number of physical qubits. We present an explicit perturbative expansion that mimics the Dyson series expansion and involves only local unitary operations, and show its optimality over other expansions under certain conditions. We numerically benchmark the method for interacting bosons, fermions, and quantum spins in different topologies, and study different physical phenomena, such as information propagation, charge-spin separation, and magnetism, on systems of up to 48 qubits only using an 8+1 qubit quantum hardware. We demonstrate our scheme on the IBM quantum cloud, verifying its noise robustness and illustrating its potential for benchmarking large quantum processors with smaller ones.
Quantum computation appears to offer significant advantages over classical computation and this has generated a tremendous interest in the field. In this thesis we study the application of quantum computers to computational problems in science and engineering, and to combinatorial optimization problems. We outline the results below. Algorithms for scientific computing require modules, i.e., building blocks, implementing elementary numerical functions that have well-controlled numerical error, are uniformly scalable and reversible, and that can be implemented efficiently. We derive quantum algorithms and circuits for computing square roots, logarithms, and arbitrary fractional powers, and derive worst-case error and cost bounds. We describe a modular approach to quantum algorithm design as a first step towards numerical standards and mathematical libraries for quantum scientific computing. A fundamental but computationally hard problem in physics is to solve the time-independent Schrödinger equation. This is accomplished by computing the eigenvalues of the corresponding Hamiltonian operator. The eigenvalues describe the different energy levels of a system. The cost of classical deterministic algorithms computing these eigenvalues grows exponentially with the number of system degrees of freedom. The number of degrees of freedom is typically proportional to the number of particles in a physical system. We show an efficient quantum algorithm for approximating a constant number of low-order eigenvalues of a Hamiltonian using a perturbation approach. We apply this algorithm to a special case of the Schrödinger equation and show that our algorithm succeeds with high probability, and has cost that scales polynomially with the number of degrees of freedom and the reciprocal of the desired accuracy. This improves and extends earlier results on quantum algorithms for estimating the ground state energy. We consider the simulation of quantum mechanical systems on a quantum computer. We show a novel divide and conquer approach for Hamiltonian simulation. Using the Hamiltonian structure, we can obtain faster simulation algorithms. Considering a sum of Hamiltonians we split them into groups, simulate each group separately, and combine the partial results. Simulation is customized to take advantage of the properties of each group, and hence yield refined bounds to the overall simulation cost. We illustrate our results using the electronic structure problem of quantum chemistry, where we obtain significantly improved cost estimates under mild assumptions. We turn to combinatorial optimization problems. An important open question is whether quantum computers provide advantages for the approximation of classically hard combinatorial problems. A promising recently proposed approach of Farhi et al. is the Quantum Approximate Optimization Algorithm (QAOA). We study the application of QAOA to the Maximum Cut problem, and derive analytic performance bounds for the lowest circuit-depth realization, for both general and special classes of graphs. Along the way, we develop a general procedure for analyzing the performance of QAOA for other problems, and show an example demonstrating the difficulty of obtaining similar results for greater depth. We show a generalization of QAOA and its application to wider classes of combinatorial optimization problems, in particular, problems with feasibility constraints. We introduce the Quantum Alternating Operator Ansatz, which utilizes more general unitary operators than the original QAOA proposal. Our framework facilitates low-resource implementations for many applications which may be particularly suitable for early quantum computers. We specify design criteria, and develop a set of results and tools for mapping diverse problems to explicit quantum circuits. We derive constructions for several important prototypical problems including Maximum Independent Set, Graph Coloring, and the Traveling Salesman problem, and show appealing resource cost estimates for their implementations.