Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2204.04082 · Frontiers of Physics

Efficient scheme for realizing a multiplex-controlled phase gate with photonic qubits in circuit quantum electrodynamics

Qi-Ping Su, Yu Zhang, Liang Bin, Chui‐Ping Yang

Published May 2, 2022• 14 citations
arXivHTMLPDF

Abstract

We propose an efficient scheme to implement a multiplex-controlled phase gate with multiple photonic qubits simultaneously controlling one target photonic qubit based on circuit quantum electrodynamics (QED). For convenience, we denote this multiqubit gate as MCP gate. The gate is realized by using a two-level coupler to couple multiple cavities. The coupler here is a superconducting qubit. This scheme is simple because the gate implementation requires only one step of operation. In addition, this scheme is quite general because the two logic states of each photonic qubit can be encoded with a vacuum state and an arbitrary non-vacuum state ∣ φ 〉 (e.g., a Fock state, a superposition of Fock states, a cat state, or a coherent state, etc.) which is orthogonal or quasi-orthogonal to the vacuum state. The scheme has some additional advantages: because only two levels of the coupler are used, i.e., no auxiliary levels are utilized, decoherence from higher energy levels of the coupler is avoided; the gate operation time does not depend on the number of qubits; and the gate is implemented deterministically because no measurement is applied. As an example, we numerically analyze the circuit-QED based experimental feasibility of implementing a three-qubit MCP gate with photonic qubits each encoded via a vacuum state and a cat state. The scheme can be applied to accomplish the same task in a wide range of physical system, which consists of multiple microwave or optical cavities coupled to a two-level coupler such as a natural or artificial atom.

DOI
10.1007/s11467-022-1163-4

Related papers

Circuit QED: single-step realization of a multiqubit controlled phase gate with one microwave photonic qubit simultaneously controlling n − 1 microwave photonic qubits

Biaoliang Ye, Zhen-Fei Zheng, Yu Zhang +1 more

We present a novel method to realize a multi-target-qubit controlled phase gate with one microwave photonic qubit simultaneously controlling n - 1 target microwave photonic qubits. This gate is implemented with n microwave cavities coupled to a superconducting flux qutrit. Each cavity hosts a microwave photonic qubit, whose two logic states are represented by the vacuum state and the single photon state of a single cavity mode, respectively. During the gate operation, the qutrit remains in the ground state and thus decoherence from the qutrit is greatly suppressed. This proposal requires only a single-step operation and thus the gate implementation is quite simple. The gate operation time is independent of the number of the qubits. In addition, this proposal does not need applying classical pulse or any measurement. Numerical simulations demonstrate that high-fidelity realization of a controlled phase gate with one microwave photonic qubit simultaneously controlling two target microwave photonic qubits is feasible with current circuit QED technology. The proposal is quite general and can be applied to implement the proposed gate in a wide range of physical systems, such as multiple microwave or optical cavities coupled to a natural or artificial Λ-type three-level atom.

arXiv:1910.08542•Optics Express•Nov 7, 2018•19 citations

One-step implementation of a multi-target-qubit controlled-phase gate with photonic qubits encoded via eigenstates of the photon-number parity operator

Qi-Ping Su, Liang Bin, Yu Zhang +1 more

In recent years, quantum state engineering and quantum information processing using microwave fields and photons have received increasing attention. In addition, multiqubit gates play an important role in quantum information processing. In this work, we propose to encode a photonic qubit via two arbitrary orthogonal eigenstates (with eigenvalues $\ifmmode\pm\else\textpm\fi{}1$, respectively) of the photon-number parity operator. With such encoding, we then present a single-step method to realize a multi-target-qubit controlled-phase gate with one photonic qubit simultaneously controlling $n\ensuremath{-}1$ target photonic qubits, by employing $n$ microwave cavities coupled to one superconducting flux qutrit. This proposal can be applied not only to implement nonhybrid multi-target-qubit controlled-phase gates using photonic qubits with various encodings, but also to realize hybrid multi-target-qubit controlled-phase gates using photonic qubits with different encodings. The gate realization requires only a single-step operation. The gate operation time does not increase with the number of target qubits. Because the qutrit remains in the ground state during the entire operation, decoherence from the qutrit is greatly suppressed. As an application, we show how to apply this gate to generate a multicavity Greenberger-Horne-Zeilinger (GHZ) entangled state with general expression. Depending on the specific encodings, we further discuss the preparation of several nonhybrid and hybrid GHZ entangled states of multiple cavities. We numerically investigate the circuit-QED experimental feasibility of creating a three-cavity spin-coherent hybrid GHZ state. This proposal can be extended to accomplish the same tasks in a wide range of physical systems, such as multiple microwave or optical cavities coupled to a three-level natural or artificial atom.

arXiv:2306.02227•Physical Review A•Mar 23, 2023•17 citations

One-step implementation of a multi-target-qubit controlled phase gate with cat-state qubits in circuit QED

You-Ji Fan, Zhen-Fei Zheng, Yu Zhang +2 more

We propose a single-step implementation of a muti-target-qubit controlled phase gate with one catstate qubit ( cqubit ) simultaneously controlling n –1 target cqubits . The two logic states of a cqubit are represented by two orthogonal cat states of a single cavity mode. In this proposal, the gate is implemented with n microwave cavities coupled to a superconducting transmon qutrit. Because the qutrit remains in the ground state during the gate operation, decoherence caused due to the qutrit’s energy relaxation and dephasing is greatly suppressed. The gate implementation is quite simple because only a single-step operation is needed and neither classical pulse nor measurement is required. Numerical simulations demonstrate that high-fidelity realization of a controlled phase gate with one cqubit simultaneously controlling two target cqubits is feasible with present circuit QED technology. This proposal can be extended to a wide range of physical systems to realize the proposed gate, such as multiple microwave or optical cavities coupled to a natural or artificial three-level atom.

arXiv:1910.10635•Frontiers of Physics•Dec 29, 2018•23 citations

Universal quantum gate with hybrid qubits in circuit quantum electrodynamics

Chui-Ping Yang, Zhen-Fei Zheng, Yu Zhang

Hybrid qubits have recently drawn intense attention in quantum computing. We here propose a method to implement a universal controlled-phase gate of two hybrid qubits via two three-dimensional (3D) microwave cavities coupled to a superconducting flux qutrit. For the gate considered here, the control qubit is a microwave photonic qubit (particle-like qubit), whose two logic states are encoded by the vacuum state and the single-photon state of a cavity, while the target qubit is a cat-state qubit (wave-like qubit), whose two logic states are encoded by the two orthogonal cat states of the other cavity. During the gate operation, the qutrit remains in the ground state; therefore, decoherence from the qutrit is greatly suppressed. The gate realization is quite simple, because only a single basic operation is employed and neither classical pulse nor measurement is used. Our numerical simulations demonstrate that with current circuit quantum electrodynamics technology, this gate can be realized with a high fidelity. The generality of this proposal allows implementing the proposed gate in a wide range of physical systems, such as two 1D or 3D microwave or optical cavities coupled to a natural or artificial three-level atom. Finally, this proposal can be applied to create a novel entangled state between a particle-like photonic qubit and a wave-like cat-state qubit.

arXiv:1910.08240•Optics Letters•Nov 19, 2018•16 citations

One-step implementation of a hybrid discrete-variable–continuous-variable phase gate with multiple photonic qubits in circuit QED

Anonymous, Wen Zheng, Yu Zhang +3 more

Quantum phase gates are of fundamental interest in quantum physics and play an important role in quantum communication and quantum computing. Here, we propose a scheme to implement a hybrid discrete-variable–continuous-variable (DV–CV) phase gate on multiple photonic qubits by utilizing multiple control microwave cavities and a single target microwave cavity, all coupled to a common superconducting qutrit (a three-level quantum system) in circuit quantum electrodynamics (QED). In our scheme, two logic states of the target qubit are encoded via the vacuum state and the coherent state (CV state) of the microwave cavity, while two logic states of the control qubits are encoded through the vacuum and single-photon states (DV states) of the microwave cavity. This hybrid DV–CV phase gate enables target qubit to acquire a phase that depends on the total number of control qubits in non-vacuum states, when the target qubit is in the coherent state. Our protocol is extensible and operationally efficient, involving just one step and the measurement of only one target qubit. In addition, as a practical application, this hybrid DV–CV phase gate can be employed as a quantum voting machine. Our numerical simulation demonstrates that the high-fidelity construction of a hybrid three-qubit DV–CV phase gate is feasible with current circuit QED technology.

Applied Physics Letters•Jan 12, 2026•0 citations

Multiplex-controlled phase gate with qubits distributed in a multicavity system

Biao‐Liang Ye, Zhen-Fei Zheng, Chui‐Ping Yang

We present a way to realize a multiplex-controlled phase gate of $n\ensuremath{-}1$ control qubits simultaneously controlling one target qubit, with $n$ qubits distributed in $n$ different cavities. This multiqubit gate is implemented by using $n$ qutrits ( three-level natural or artificial atoms) placed in $n$ different cavities, which are coupled to an auxiliary qutrit. Here, the two logic states of a qubit are represented by the two lowest levels of a qutrit placed in a cavity. We show that this $n$-qubit controlled phase gate can be realized using only $2n+2$ basic operations, i.e., the number of required basic operations only increases linearly with the number $n$ of qubits. Since each basic operation employs the qutrit-cavity or qutrit-pulse resonant interaction, the gate can be fast implemented when the number of qubits is not large. Numerical simulations show that a three-qubit controlled phase gate, which is executed on three qubits distributed in three different cavities, can be high-fidelity implemented by using a circuit QED system. This proposal is quite general and can be applied to a wide range of physical systems, with atoms, NV centers, quantum dots, or various superconducting qutrits distributed in different cavities. Finally, this method can be applied to implement a multiqubit controlled phase gate with atoms using a cavity. A detailed discussion on implementing a three-qubit controlled phase gate with atoms and one cavity is presented.

arXiv:1806.04559•Physical Review A•Jun 25, 2018•16 citations
We propose an efficient scheme to implement a multiplex-controlled phase gate with multiple photonic qubits simultaneously controlling one target photonic qubit based on circuit quantum electrodynamics (QED). For convenience, we denote this multiqubit gate as MCP gate. The gate is realized by using a two-level coupler to couple multiple cavities. The coupler here is a superconducting qubit. This scheme is simple because the gate implementation requires only one step of operation. In addition, this scheme is quite general because the two logic states of each photonic qubit can be encoded with a vacuum state and an arbitrary non-vacuum state ∣ φ 〉 (e.g., a Fock state, a superposition of Fock states, a cat state, or a coherent state, etc.) which is orthogonal or quasi-orthogonal to the vacuum state. The scheme has some additional advantages: because only two levels of the coupler are used, i.e., no auxiliary levels are utilized, decoherence from higher energy levels of the coupler is avoided; the gate operation time does not depend on the number of qubits; and the gate is implemented deterministically because no measurement is applied. As an example, we numerically analyze the circuit-QED based experimental feasibility of implementing a three-qubit MCP gate with photonic qubits each encoded via a vacuum state and a cat state. The scheme can be applied to accomplish the same task in a wide range of physical system, which consists of multiple microwave or optical cavities coupled to a two-level coupler such as a natural or artificial atom.
We present a novel method to realize a multi-target-qubit controlled phase gate with one microwave photonic qubit simultaneously controlling n - 1 target microwave photonic qubits. This gate is implemented with n microwave cavities coupled to a superconducting flux qutrit. Each cavity hosts a microwave photonic qubit, whose two logic states are represented by the vacuum state and the single photon state of a single cavity mode, respectively. During the gate operation, the qutrit remains in the ground state and thus decoherence from the qutrit is greatly suppressed. This proposal requires only a single-step operation and thus the gate implementation is quite simple. The gate operation time is independent of the number of the qubits. In addition, this proposal does not need applying classical pulse or any measurement. Numerical simulations demonstrate that high-fidelity realization of a controlled phase gate with one microwave photonic qubit simultaneously controlling two target microwave photonic qubits is feasible with current circuit QED technology. The proposal is quite general and can be applied to implement the proposed gate in a wide range of physical systems, such as multiple microwave or optical cavities coupled to a natural or artificial Λ-type three-level atom.
In recent years, quantum state engineering and quantum information processing using microwave fields and photons have received increasing attention. In addition, multiqubit gates play an important role in quantum information processing. In this work, we propose to encode a photonic qubit via two arbitrary orthogonal eigenstates (with eigenvalues $\ifmmode\pm\else\textpm\fi{}1$, respectively) of the photon-number parity operator. With such encoding, we then present a single-step method to realize a multi-target-qubit controlled-phase gate with one photonic qubit simultaneously controlling $n\ensuremath{-}1$ target photonic qubits, by employing nnn microwave cavities coupled to one superconducting flux qutrit. This proposal can be applied not only to implement nonhybrid multi-target-qubit controlled-phase gates using photonic qubits with various encodings, but also to realize hybrid multi-target-qubit controlled-phase gates using photonic qubits with different encodings. The gate realization requires only a single-step operation. The gate operation time does not increase with the number of target qubits. Because the qutrit remains in the ground state during the entire operation, decoherence from the qutrit is greatly suppressed. As an application, we show how to apply this gate to generate a multicavity Greenberger-Horne-Zeilinger (GHZ) entangled state with general expression. Depending on the specific encodings, we further discuss the preparation of several nonhybrid and hybrid GHZ entangled states of multiple cavities. We numerically investigate the circuit-QED experimental feasibility of creating a three-cavity spin-coherent hybrid GHZ state. This proposal can be extended to accomplish the same tasks in a wide range of physical systems, such as multiple microwave or optical cavities coupled to a three-level natural or artificial atom.
We propose a single-step implementation of a muti-target-qubit controlled phase gate with one catstate qubit ( cqubit ) simultaneously controlling n –1 target cqubits . The two logic states of a cqubit are represented by two orthogonal cat states of a single cavity mode. In this proposal, the gate is implemented with n microwave cavities coupled to a superconducting transmon qutrit. Because the qutrit remains in the ground state during the gate operation, decoherence caused due to the qutrit’s energy relaxation and dephasing is greatly suppressed. The gate implementation is quite simple because only a single-step operation is needed and neither classical pulse nor measurement is required. Numerical simulations demonstrate that high-fidelity realization of a controlled phase gate with one cqubit simultaneously controlling two target cqubits is feasible with present circuit QED technology. This proposal can be extended to a wide range of physical systems to realize the proposed gate, such as multiple microwave or optical cavities coupled to a natural or artificial three-level atom.
Hybrid qubits have recently drawn intense attention in quantum computing. We here propose a method to implement a universal controlled-phase gate of two hybrid qubits via two three-dimensional (3D) microwave cavities coupled to a superconducting flux qutrit. For the gate considered here, the control qubit is a microwave photonic qubit (particle-like qubit), whose two logic states are encoded by the vacuum state and the single-photon state of a cavity, while the target qubit is a cat-state qubit (wave-like qubit), whose two logic states are encoded by the two orthogonal cat states of the other cavity. During the gate operation, the qutrit remains in the ground state; therefore, decoherence from the qutrit is greatly suppressed. The gate realization is quite simple, because only a single basic operation is employed and neither classical pulse nor measurement is used. Our numerical simulations demonstrate that with current circuit quantum electrodynamics technology, this gate can be realized with a high fidelity. The generality of this proposal allows implementing the proposed gate in a wide range of physical systems, such as two 1D or 3D microwave or optical cavities coupled to a natural or artificial three-level atom. Finally, this proposal can be applied to create a novel entangled state between a particle-like photonic qubit and a wave-like cat-state qubit.
Quantum phase gates are of fundamental interest in quantum physics and play an important role in quantum communication and quantum computing. Here, we propose a scheme to implement a hybrid discrete-variable–continuous-variable (DV–CV) phase gate on multiple photonic qubits by utilizing multiple control microwave cavities and a single target microwave cavity, all coupled to a common superconducting qutrit (a three-level quantum system) in circuit quantum electrodynamics (QED). In our scheme, two logic states of the target qubit are encoded via the vacuum state and the coherent state (CV state) of the microwave cavity, while two logic states of the control qubits are encoded through the vacuum and single-photon states (DV states) of the microwave cavity. This hybrid DV–CV phase gate enables target qubit to acquire a phase that depends on the total number of control qubits in non-vacuum states, when the target qubit is in the coherent state. Our protocol is extensible and operationally efficient, involving just one step and the measurement of only one target qubit. In addition, as a practical application, this hybrid DV–CV phase gate can be employed as a quantum voting machine. Our numerical simulation demonstrates that the high-fidelity construction of a hybrid three-qubit DV–CV phase gate is feasible with current circuit QED technology.
We present a way to realize a multiplex-controlled phase gate of $n\ensuremath{-}1$ control qubits simultaneously controlling one target qubit, with nnn qubits distributed in nnn different cavities. This multiqubit gate is implemented by using nnn qutrits ( three-level natural or artificial atoms) placed in nnn different cavities, which are coupled to an auxiliary qutrit. Here, the two logic states of a qubit are represented by the two lowest levels of a qutrit placed in a cavity. We show that this nnn-qubit controlled phase gate can be realized using only 2n+22n+22n+2 basic operations, i.e., the number of required basic operations only increases linearly with the number nnn of qubits. Since each basic operation employs the qutrit-cavity or qutrit-pulse resonant interaction, the gate can be fast implemented when the number of qubits is not large. Numerical simulations show that a three-qubit controlled phase gate, which is executed on three qubits distributed in three different cavities, can be high-fidelity implemented by using a circuit QED system. This proposal is quite general and can be applied to a wide range of physical systems, with atoms, NV centers, quantum dots, or various superconducting qutrits distributed in different cavities. Finally, this method can be applied to implement a multiqubit controlled phase gate with atoms using a cavity. A detailed discussion on implementing a three-qubit controlled phase gate with atoms and one cavity is presented.