Quantum error correction is one of the most important milestones for realization of large-scale quantum computation. To achieve this, it is essential not only to integrate a large number of qubits with high fidelity, but also to build a scalable classical system that can perform error correction. Here, we propose an efficient and scalable decoder for quantum error correction using Fujitsu Digital Annealer (DA). Specifically, the error correction problem of stabilizer codes is mapped into an Ising-type optimization problem, so-called quadratic unconstrained binary optimization (QUBO) problem, which is solved by DA. In particular, we implement the proposed DA decoder for the surface code and perform detailed numerical experiments for various code distances to see its performance and scalability. We observe that computational scaling for the DA decoder has a lower order of polynomial than the decoding methods using simulated annealing (SA) and minimum-weight perfect matching (MWPM) algorithm under all tested conditions. It is also shown that the DA decoder has advantages over the Union-Find (UF) decoder from a variety of perspectives including hardware implementation. Furthermore, the threshold behavior of the logical error probability for the DA decoder is analyzed and the resultant threshold lies between 9.4% and 9.8%, which is very close to that obtained by the MWPM decoder. This result clearly shows the high potential of the DA decoder for quantum error correction.
Quantum error correction is one of the most important milestones for realization of large-scale quantum computation. To achieve this, it is essential not only to integrate a large number of qubits with high fidelity, but also to build a scalable classical system that can perform error correction. Here, we propose an efficient and scalable decoder for quantum error correction using Fujitsu Digital Annealer (DA). Specifically, the error correction problem of stabilizer codes is mapped into an Ising-type optimization problem, so-called quadratic unconstrained binary optimization (QUBO) problem, which is solved by DA. In particular, we implement the proposed DA decoder for the surface code and perform detailed numerical experiments for various code distances to see its performance and scalability. We observe that computational scaling for the DA decoder has a lower order of polynomial than the decoding methods using simulated annealing (SA) and minimum-weight perfect matching (MWPM) algorithm under all tested conditions. It is also shown that the DA decoder has advantages over the Union-Find (UF) decoder from a variety of perspectives including hardware implementation. Furthermore, the threshold behavior of the logical error probability for the DA decoder is analyzed and the resultant threshold lies between 9.4% and 9.8%, which is very close to that obtained by the MWPM decoder. This result clearly shows the high potential of the DA decoder for quantum error correction.
Quantum error correction is one of the most important milestones for the realization of large-scale quantum computation. To achieve this, it is essential not only to integrate a large number of qubits with high fidelity but also to build a scalable classical system that can perform error correction. Here, we propose an efficient and scalable decoder for quantum error correction using ``Fujitsu Digital Annealer'' (DA). Specifically, the error correction problem of stabilizer codes is mapped into an Ising-type optimization problem, so-called quadratic unconstrained binary optimization (QUBO) problem, which is solved by DA. In particular, we implement the proposed DA decoder for the surface code and perform detailed numerical experiments for various code distances to see its performance and scalability. We observe that computational scaling for the DA decoder has a lower order of polynomials than the decoding methods using simulated annealing (SA) and minimum-weight perfect matching (MWPM) algorithm under all tested conditions. It is also shown that the DA decoder has advantages over the Union-Find (UF) decoder from a variety of perspectives including hardware implementation. Furthermore, the threshold behavior of the logical error probability for the DA decoder is analyzed and the resultant threshold lies between 9.4% and 9.8%, which is very close to that obtained by the MWPM decoder. This result clearly shows the high potential of the DA decoder for quantum error correction.
Abstract To address qubits' high environmental sensitivity and reduce the significant error rates in current quantum devices, quantum error correction stands as one of the most dependable approaches. The topological surface code, renowned for its unique qubit lattice structure, is widely considered a pivotal tool for enabling fault-tolerant quantum computation. Through redundancy introduced across multiple qubits, the surface code safeguards quantum information and identifies errors via state changes captured by syndrome qubits. However, simultaneous errors in data and syndrome qubits substantially escalate decoding complexity. Quantum Generative Adversarial Networks (QGANs) have emerged as promising deep learning frameworks, effectively harnessing quantum advantages for practical tasks such as image processing and data optimization. Consequently, a topological code trainer for quantum-classical hybrid GANs is proposed as an auxiliary model to enhance error correction in machine learning-based decoders, demonstrating significantly improved training accuracy compared to the traditional Minimum Weight Perfect Matching (MWPM) algorithm, which achieves an accuracy of 65 . Numerical experiments reveal that the decoder achieves a fidelity threshold of P=0.1978, substantially surpassing the traditional algorithm's threshold of P=0.1024. To enhance decoding efficiency, a Transformer decoder is integrated, incorporating syndrome error outputs trained via QGANs into its framework. By leveraging its self-attention mechanism, the Transformer effectively captures long-range qubit dependencies at a global scale, enabling high-fidelity error correction over larger dimensions. Numerical validation of the surface code error threshold demonstrates an 8.5 threshold with a correction success rate exceeding 94, whereas the local MWPM decoder achieves only 55 and fails to support large-scale computation at a 4 threshold.
Quantum error correction technology is an important method to eliminate errors during the operation of quantum computers. In order to solve the problem of influence of errors on physical qubits, we propose an approximate error correction scheme that performs dimension mapping operations on surface codes. This error correction scheme utilizes the topological properties of error correction codes to map the surface code dimension to three dimensions. Compared to previous error correction schemes, the present three-dimensional surface code exhibits good scalability due to its higher redundancy and more efficient error correction capabilities. By reducing the number of ancilla qubits required for error correction, this approach achieves savings in measurement space and reduces resource consumption costs. In order to improve the decoding efficiency and solve the problem of the correlation between the surface code stabilizer and the 3D space after dimension mapping, we employ a reinforcement learning (RL) decoder based on deep Q-learning, which enables faster identification of the optimal syndrome and achieves better thresholds through conditional optimization. Compared to the minimum weight perfect matching decoding, the threshold of the RL trained model reaches 0.78%, which is 56% higher and enables large-scale fault-tolerant quantum computation.
Quantum error correction is a prerequisite for quantum computing; however, the performance critically depends on the accuracy of the decoding algorithm. To address these challenges, we propose a hybrid decoding architecture, BP + UF + BP. The protocol initiates with a truncated global BP stage to extract probabilistic gradients without requiring full convergence. This soft information guides a reliability-based Union-Find (UF) algorithm to prioritize high-likelihood error mechanisms. Finally, a local subgraph BP refinement maximizes correction accuracy. Numerical simulations on rotated surface codes under circuit-level depolarizing noise demonstrate a fault-tolerance threshold of approximately 0.72%. This significantly outperforms standard Minimum Weight Perfect Matching (MWPM) and Union-Find (UF) baselines. Notably, our method significantly reduces the logical error rate compared to the conventional decoders. With its empirically near-linear scaling under fixed iteration, the proposed architecture presents a scalable solution for real-time fault-tolerant quantum computing.
Quantum error correction is needed for future quantum computers. Classical error correcting codes are not suitable for this due to the nature of quantum mechanics. Therefore, new codes need to be developed. A promising candidate is the toric code, a surface code, because of its locality and its high error correcting capability and thresholds (the error probability below which increasing the size of the code decreases the failure rate). This thesis provides an introduction to quantum error correction and the stabilizer formalism, which is used to introduce the toric code. Several decoders are looked at, including the Minimum Weight Perfect Matching (MWPM) decoder and a recently developed decoder, the Union-Find (UF) decoder. The UF decoder is useful because of its almost-linear time complexity, while only reducing the threshold by a marginal amount compared to the MWPM decoder. In this thesis, the time complexity of the weighted growth version of the UF decoder is analysed. The toric code and the decoders have been implemented and simulated, and the thresholds have been determined. For the MWPM decoder, the threshold was determined to be 11.5±0.2%, which is not in agreement with the threshold in literature of 10.3%, and should not be possible according to the optimal threshold of about 11%. This probably is a result of the low grid sizes (up to a gridsize of 11) of the code used due to the time needed to simulate the MWPM decoder. For the UF decoder, the threshold found was 9.7 ± 0.9%, which is in agreement with the threshold of 9.9% found by N. Delfosse and N. Nickerson. The time complexity of the UF decoder has also been determined, and is indeed almost-linear as expected by the analysis.
Quantum computation promises significant computational advantages over classical computation for some problems. However, quantum hardware suffers from much higher error rates than in classical hardware. As a result, extensive quantum error correction is required to execute a useful quantum algorithm. The decoder is a key component of the error correction scheme whose role is to identify errors faster than they accumulate in the quantum computer and that must be implemented with minimum hardware resources in order to scale to the regime of practical applications. In this work, we consider surface code error correction, which is the most popular family of error correcting codes for quantum computing, and we design a decoder micro-architecture for the Union-Find decoding algorithm. We propose a three-stage fully pipelined hardware implementation of the decoder that significantly speeds up the decoder. Then, we optimize the amount of decoding hardware required to perform error correction simultaneously over all the logical qubits of the quantum computer. By sharing resources between logical qubits, we obtain a 67% reduction of the number of hardware units and the memory capacity is reduced by 70%. Moreover, we reduce the bandwidth required for the decoding process by a factor at least 30x using low-overhead compression algorithms. Finally, we provide numerical evidence that our optimized micro-architecture can be executed fast enough to correct errors in a quantum computer.