Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2203.07979 · Optica

Loss-tolerant all-photonic quantum repeater with generalized Shor code

Rui Zhang, Li-Zheng Liu, Zheng-Da Li, Yue-Yang Fei, Xu-Fei Yin, Li Li, Nai-Le Liu, Yingqiu Mao, Yu-Ao Chen, Jian-Wei Pan

Published Dec 21, 2021• 26 citations
arXivHTMLPDF

Abstract

The all-photonic quantum repeater (APQR) is a promising repeater scheme to realize long-distance quantum communication. For a practical APQR, an indispensable requirement is the robustness of the repeater graph state (RGS) against photon loss. We propose a new loss-tolerant scheme by applying the generalized Shor code to RGS, which can be experimentally demonstrated with current technology. Experimentally, we first prepare and verify the nine-qubit Shor code. Then, by applying the generalized Shor code to APQR and preparing a simplified encoded RGS with the structure of 1 × 2 based on the Shor code state, the effectiveness of our loss-tolerant scheme and the loss tolerance of the encoded RGS are respectively verified. Our results make an essential step toward a practical APQR and enrich the research of quantum error correction code.

DOI
10.1364/optica.439170

Related papers

Protocols for All-Photonic Quantum Repeaters

Naphan Benchasattabuse, Michal Hajdušek, Rodney Van Meter

All-photonic repeater scheme based on a repeater graph state (RGS) promises tolerance to photon losses as well as operational errors. An attractive promise of this scheme is that it offers a fast Bell pair generation rate, limited only by the RGS creation time. This is in stark contrast to the traditional quantum repeater with quantum memories, where the Bell pair generation time is limited by the round-trip wait time leading to poor Bell pair generation performance and quality due to the decoherence of quantum memories. Prior research has focused on lowering the cost of RGS generation and improving upon the probabilistic generation to a deterministic generation with required photon counts to be the same as the number of qubits in the RGS. The operations of creating and manipulating the RGS into an end-to-end Bell pair are complex and have not been fully figured out in detail. Here, we focus on improving the practicality of the RGS scheme in real-world implementation and address three open questions of the RGS scheme, namely; how do end nodes participate in the connection, what classical information needs to be exchanged and processed between nodes, and how to make RGS scheme work hand in hand with the traditional quantum repeaters with memories.

IEEE International Conference on Quantum Computing and Engineering (QCE)•Sep 17, 2023•6 citations

An Improved Design for All-Photonic Quantum Repeaters

Ashlesha Patil, Saikat Guha

All-photonic quantum repeaters use multi-qubit photonic graph states, called repeater graph states (RGS), instead of matter-based quantum memories, for protection against predominantly loss errors. The RGS comprises tree-graph-encoded logical qubits for error correction at the repeaters and physical {\em link} qubits to create entanglement between neighboring repeaters. The two methods to generate the RGS are probabilistic stitching -- using linear optical Bell state measurements (fusion) -- of small entangled states prepared via multiplexed-probabilistic linear optical circuits fed with single photons, and a direct deterministic preparation using a small number of quantum-logic-capable solid-state emitters. The resource overhead due to fusions and the circuit depth of the quantum emitter system both increase with the size of the RGS. Therefore engineering a resource-efficient RGS is crucial. We propose a new RGS design, which achieves a higher entanglement rate for all-photonic quantum repeaters using fewer qubits than the previously known RGS would. We accomplish this by boosting the probability of entangling neighboring repeaters with tree-encoded link qubits. We also propose a new adaptive scheme to perform logical BSM on the link qubits for loss-only errors. The adaptive BSM outperforms the previous schemes for logical BSM on tree codes when the qubit loss probability is uniform. It reduces the number of optical modes required to perform logical BSM on link qubits to improve the entanglement rate further.

arXiv:2405.11768•May 20, 2024•0 citations

Architecture and Protocols for All-Photonic Quantum Repeaters

Naphan Benchasattabuse, Michal Hajdušek, Rodney Van Meter

The all-photonic quantum repeater scheme, utilizing a type of graph state called the repeater graph state (RGS), promises resilience to photon losses and operational errors, offering a fast Bell pair generation rate limited only by the RGS creation time (rather than enforced round-trip waits). While existing research has predominantly focused on RGS generation and secret key sharing rate analysis, there is a need to extend investigations to encompass broader applications, such as distributed computation and teleportation, the main tasks envisioned for the Quantum Internet. Here we propose a new emitter-photonic qubit building block and an RGS protocol that addresses several key considerations: end node involvement in connection establishment, decoding of logical qubits within the RGS, and computing the Pauli frame corrections at each participating node to ensure the desired correct end-to-end Bell pair state. Our proposed building block significantly reduces the total number of emissive quantum memories required for end nodes and seamlessly integrates all-photonic and memory-based repeaters under the same communication protocol. We also present an algorithm for decoding logical measurement results, employing graphical reasoning based on graph state manipulation rules.

arXiv:2306.03748•IEEE International Conference on Quantum Computing and Engineering (QCE)•Sep 15, 2024•12 citations

All-photonic one-way quantum repeaters with measurement-based error correction

Daoheng Niu, Yuxuan Zhang, Alireza Shabani +1 more

Abstract Quantum repeater is the key technology enabler for long-distance quantum communication. To date, most of the existing quantum repeater protocols are designed based on specific quantum codes or graph states. In this paper, we propose a general framework for all-photonic one-way quantum repeaters based on the measurement-based error correction, which can be adapted to any Calderbank–Shor–Steane code including the recently discovered quantum low-density parity check (QLDPC) codes. We present a decoding scheme, where the error correction process is carried out at the destination based on the accumulated data from the measurements made across the network. This procedure not only outperforms the conventional protocols with independent repeaters but also simplifies the local quantum operations at repeaters. As an example, we numerically show that the [[48, 6, 8]] generalized bicycle code (as a small but efficient QLDPC code) has an equally good performance while reducing the resources by at least an order of magnitude.

npj Quantum Information•Oct 21, 2023•18 citations

Loss-Tolerant Quantum Communication via Bosonic-GKP-Parity-Encoding

S. Nibedita Swain, Timothy C. Ralph

Quantum repeaters constitute a promising platform for enabling long-distance quantum communication and may ultimately serve as the backbone of a secure quantum internet, a scalable quantum network, or a distributed quantum computer. An efficient approach to encoding qubits within an error correcting code is provided by bosonic codes, in which even a single oscillator mode can function as a sufficiently large physical system. In this work, we initially investigate the bosonic Gottesman Kitaev Preskill (GKP) code as a promising platform for loss correcting quantum repeaters, compatible with room temperature implementation, and analyse how loss and other noise sources propagate through the circuit using Heisenberg evolution. We analyse three quantum repeater protocols in which transmission loss is suppressed at the cost of logical errors, identifying a relay-like teleamplifier as the optimal scheme. This enables long distance quantum communication via densely packed nodes without higher-level encoding, and we evaluate the resulting secure key rates exploiting analog syndrome information. Furthermore, we propose a concatenated Bell-state measurement (CBSM) scheme with a modified parity encoding based on GKP qubits, CV measurement with teleamplifier and a clipping method that corrects transmission loss without introducing logical errors. This significantly enhances the possible secure key distance. We find that GKP based repeaters can achieve performance comparable to approaches relying on photonic qubits, while requiring orders of magnitude fewer qubits. Our parity encoded GKP repeater protocol achieves a substantially higher secret key rate than existing GKP based repeater schemes while maintaining a comparable resource overhead.

quant-pharXiv:2604.09002•Apr 13, 2026•0 citations

All-photonic one-way quantum repeaters

Daoheng Niu, Yuxuan Zhang, Alireza Shabani +1 more

Quantum repeater is the key technology enabler for long-distance quantum communication. To date, most of the existing quantum repeater protocols are designed based on specific quantum codes or graph states. In this paper, we propose a general framework for all-photonic one-way quantum repeaters based on the measurement-based error correction, which can be adapted to any Calderbank-Shor-Steane codes including the recently discovered quantum low density parity check (QLDPC) codes. We present a novel decoding scheme, where the error correction process is carried out at the destination based on the accumulated data from the measurements made across the network. This procedure not only outperforms the conventional protocols with independent repeaters but also simplifies the local quantum operations at repeaters. As an example, we numerically show that the [[48,6,8]] generalized bicycle code (as a small but efficient QLDPC code) has an equally good performance while reducing the resources by at least an order of magnitude.

arXiv:2210.10071•Oct 18, 2022•1 citation
The all-photonic quantum repeater (APQR) is a promising repeater scheme to realize long-distance quantum communication. For a practical APQR, an indispensable requirement is the robustness of the repeater graph state (RGS) against photon loss. We propose a new loss-tolerant scheme by applying the generalized Shor code to RGS, which can be experimentally demonstrated with current technology. Experimentally, we first prepare and verify the nine-qubit Shor code. Then, by applying the generalized Shor code to APQR and preparing a simplified encoded RGS with the structure of 1 × 2 based on the Shor code state, the effectiveness of our loss-tolerant scheme and the loss tolerance of the encoded RGS are respectively verified. Our results make an essential step toward a practical APQR and enrich the research of quantum error correction code.
All-photonic repeater scheme based on a repeater graph state (RGS) promises tolerance to photon losses as well as operational errors. An attractive promise of this scheme is that it offers a fast Bell pair generation rate, limited only by the RGS creation time. This is in stark contrast to the traditional quantum repeater with quantum memories, where the Bell pair generation time is limited by the round-trip wait time leading to poor Bell pair generation performance and quality due to the decoherence of quantum memories. Prior research has focused on lowering the cost of RGS generation and improving upon the probabilistic generation to a deterministic generation with required photon counts to be the same as the number of qubits in the RGS. The operations of creating and manipulating the RGS into an end-to-end Bell pair are complex and have not been fully figured out in detail. Here, we focus on improving the practicality of the RGS scheme in real-world implementation and address three open questions of the RGS scheme, namely; how do end nodes participate in the connection, what classical information needs to be exchanged and processed between nodes, and how to make RGS scheme work hand in hand with the traditional quantum repeaters with memories.
All-photonic quantum repeaters use multi-qubit photonic graph states, called repeater graph states (RGS), instead of matter-based quantum memories, for protection against predominantly loss errors. The RGS comprises tree-graph-encoded logical qubits for error correction at the repeaters and physical {\em link} qubits to create entanglement between neighboring repeaters. The two methods to generate the RGS are probabilistic stitching -- using linear optical Bell state measurements (fusion) -- of small entangled states prepared via multiplexed-probabilistic linear optical circuits fed with single photons, and a direct deterministic preparation using a small number of quantum-logic-capable solid-state emitters. The resource overhead due to fusions and the circuit depth of the quantum emitter system both increase with the size of the RGS. Therefore engineering a resource-efficient RGS is crucial. We propose a new RGS design, which achieves a higher entanglement rate for all-photonic quantum repeaters using fewer qubits than the previously known RGS would. We accomplish this by boosting the probability of entangling neighboring repeaters with tree-encoded link qubits. We also propose a new adaptive scheme to perform logical BSM on the link qubits for loss-only errors. The adaptive BSM outperforms the previous schemes for logical BSM on tree codes when the qubit loss probability is uniform. It reduces the number of optical modes required to perform logical BSM on link qubits to improve the entanglement rate further.
The all-photonic quantum repeater scheme, utilizing a type of graph state called the repeater graph state (RGS), promises resilience to photon losses and operational errors, offering a fast Bell pair generation rate limited only by the RGS creation time (rather than enforced round-trip waits). While existing research has predominantly focused on RGS generation and secret key sharing rate analysis, there is a need to extend investigations to encompass broader applications, such as distributed computation and teleportation, the main tasks envisioned for the Quantum Internet. Here we propose a new emitter-photonic qubit building block and an RGS protocol that addresses several key considerations: end node involvement in connection establishment, decoding of logical qubits within the RGS, and computing the Pauli frame corrections at each participating node to ensure the desired correct end-to-end Bell pair state. Our proposed building block significantly reduces the total number of emissive quantum memories required for end nodes and seamlessly integrates all-photonic and memory-based repeaters under the same communication protocol. We also present an algorithm for decoding logical measurement results, employing graphical reasoning based on graph state manipulation rules.
Abstract Quantum repeater is the key technology enabler for long-distance quantum communication. To date, most of the existing quantum repeater protocols are designed based on specific quantum codes or graph states. In this paper, we propose a general framework for all-photonic one-way quantum repeaters based on the measurement-based error correction, which can be adapted to any Calderbank–Shor–Steane code including the recently discovered quantum low-density parity check (QLDPC) codes. We present a decoding scheme, where the error correction process is carried out at the destination based on the accumulated data from the measurements made across the network. This procedure not only outperforms the conventional protocols with independent repeaters but also simplifies the local quantum operations at repeaters. As an example, we numerically show that the [[48, 6, 8]] generalized bicycle code (as a small but efficient QLDPC code) has an equally good performance while reducing the resources by at least an order of magnitude.
Quantum repeaters constitute a promising platform for enabling long-distance quantum communication and may ultimately serve as the backbone of a secure quantum internet, a scalable quantum network, or a distributed quantum computer. An efficient approach to encoding qubits within an error correcting code is provided by bosonic codes, in which even a single oscillator mode can function as a sufficiently large physical system. In this work, we initially investigate the bosonic Gottesman Kitaev Preskill (GKP) code as a promising platform for loss correcting quantum repeaters, compatible with room temperature implementation, and analyse how loss and other noise sources propagate through the circuit using Heisenberg evolution. We analyse three quantum repeater protocols in which transmission loss is suppressed at the cost of logical errors, identifying a relay-like teleamplifier as the optimal scheme. This enables long distance quantum communication via densely packed nodes without higher-level encoding, and we evaluate the resulting secure key rates exploiting analog syndrome information. Furthermore, we propose a concatenated Bell-state measurement (CBSM) scheme with a modified parity encoding based on GKP qubits, CV measurement with teleamplifier and a clipping method that corrects transmission loss without introducing logical errors. This significantly enhances the possible secure key distance. We find that GKP based repeaters can achieve performance comparable to approaches relying on photonic qubits, while requiring orders of magnitude fewer qubits. Our parity encoded GKP repeater protocol achieves a substantially higher secret key rate than existing GKP based repeater schemes while maintaining a comparable resource overhead.
Quantum repeater is the key technology enabler for long-distance quantum communication. To date, most of the existing quantum repeater protocols are designed based on specific quantum codes or graph states. In this paper, we propose a general framework for all-photonic one-way quantum repeaters based on the measurement-based error correction, which can be adapted to any Calderbank-Shor-Steane codes including the recently discovered quantum low density parity check (QLDPC) codes. We present a novel decoding scheme, where the error correction process is carried out at the destination based on the accumulated data from the measurements made across the network. This procedure not only outperforms the conventional protocols with independent repeaters but also simplifies the local quantum operations at repeaters. As an example, we numerically show that the [[48,6,8]] generalized bicycle code (as a small but efficient QLDPC code) has an equally good performance while reducing the resources by at least an order of magnitude.