arXiv:2203.04885

Group index matched frequency conversion in lithium niobate on insulator waveguides

Kumar, Pawan, Mohammadreza Younesi, Sina Saravi, Frank Setzpfandt, Thomas Pertsch

Published Mar 9, 2022• 1 citation

Abstract

Sources of spectrally engineered photonic states are a key resource in several quantum technologies. Of particular importance are the so-called factorizable biphoton states which possess no spectral entanglement and hence, are ideal for heralded generation of high-purity single photons. An essential prerequisite for generating these states through nonlinear frequency conversion is the control over the group indices of the photonic modes of the source. Here, we show that thin-film lithium niobate on insulator (LNOI) is an excellent platform for this purpose. We design and fabricate periodically poled ridge waveguides in LNOI to demonstrate group index engineering of its guided photonic modes and harness this control to experimentally realize on-chip group index matched type-II sum-frequency generation (SFG) and photon-pair creation through spontaneous parametric down-conversion (SPDC). Also, we numerically study the role of the top cladding layer in tuning the dispersion properties of the ridge waveguide structures and reveal a distinctive difference between the air and silica-clad designs which are currently among the two most common device cladding configurations in LNOI. We expect that these results will be relevant for various classical and quantum applications where dispersion control is crucial in tailoring the nonlinear response of the LNOI-based devices.

DOI: 10.48550/arxiv.2203.04885

Related papers

Group-index-matched frequency conversion in lithium niobate on insulator waveguides

Pawan Kumar, Mohammadreza Younesi, Sina Saravi +2 more

Sources of spectrally engineered photonic states are a key resource in several quantum technologies. Of particular importance are the so-called factorizable biphoton states, which possess no spectral entanglement and hence, are ideal for heralded generation of high-purity single photons. An essential prerequisite for generating these states through nonlinear frequency conversion is the control over the group indices of the photonic modes of the source. Here, we show that thin-film lithium niobate on insulator (LNOI) is an excellent platform for this purpose. We design and fabricate periodically poled ridge waveguides in LNOI to demonstrate group index engineering of its guided photonic modes and harness this control to experimentally realize on-chip group index matched type-II sum-frequency generation (SFG). Also, we numerically study the role of the top cladding layer in tuning the dispersion properties of the ridge waveguide structures and reveal a distinctive difference between the air and silica-clad designs which are currently among the two most common device cladding configurations in LNOI. We expect that these results will be relevant for various classical and quantum applications where dispersion control is crucial in tailoring the nonlinear response of the LNOI-based devices.

Frontiers in PhotonicsAug 4, 202211 citations

Avoiding lateral mode leakage in thin film lithium niobate waveguides for the generation of spectrally pure photons at telecom wavelengths

Muskan Arora, Pranav Chokkara, Jasleen Lugani

Photonic integrated optical components, notably straight waveguides, serve as pivotal elements for on-chip generation and manipulation of quantum states of light. In this work, we focus on optimizing waveguides based on lithium niobate on insulator (LNOI) to generate photon pairs at telecom wavelength using spontaneous parametric down-conversion (SPDC). Specifically, we investigate lateral leakage for all possible SPDC processes involving type 0, type I and type II phase matching conditions in an X-cut lithium niobate waveguide and provide a recipe to avoid leakage loss for the interacting photons. Furthermore, focusing on type II phase matching, we engineer the waveguide in the single mode regime such that it also satisfies group index matching for generating spectrally pure single photons with high purity (99.33%). We also address fabrication imperfections of the optimized design and found that the spectral purity of the generated photons is robust to fabrication errors. This work serves as a tutorial for the appropriate selection of morphological parameters to obtain lossless, single mode LNOI waveguides for building linear optical circuits and photon pair generation at telecom wavelengths using desired phase-matching conditions.

arXiv:2402.05694Feb 8, 20240 citations

Group index matching for widely tuned SPDC processes in singly poled LNOI waveguide

Muskan Arora, Pranav Chokkara, Jasleen Lugani

Abstract We demonstrate the importance of group index engineering and appropriate poling in lithium niobate on insulator (LNOI) waveguide for enabling widely tuned spontaneous parametric downconversion (SPDC) processes.We show that asymmetric and symmetric group index matching (AGIM and SGIM) conditions in such strongly dispersive waveguides allow for phase-matching a wide range of SPDC processes with tunable spectral properties of output photons by changing just the pump wavelength. Condsidering an x-cut LNOI waveguide geometry, we obtain a large pump wavelength tuning range (∼536 nm for AGIM and (∼625 nm for SGIM), thereby facilitating the generation of widely tuned downconverted photons in a singly poled waveguide device. The resultant photon pairs slowly span different wavelength bands, covering NIR and MIR regions, which are important for various quantum information tasks. We also analyze the effect of different waveguide cross-sections on group index engineering capabilities and their influence on the properties of the generated quantum light. The reported work highlights the significance of dispersion properties of the non-linear waveguides and their role in building compact and tunable quantum light sources which can simultaneously cater to a wide variety of quantum optical tasks.

Optical and Quantum ElectronicsMay 19, 20261 citation

Avoiding lateral mode leakage in thin film lithium niobate waveguides for the generation of spectrally pure photons at telecom wavelengths

Muskan Arora, Pranav Chokkara, Jasleen Lugani

Abstract Photonic integrated optical components, notably straight waveguides, serve as pivotal elements for on-chip generation and manipulation of quantum states of light. In this work, we focus on optimizing waveguides based on lithium niobate on insulator (LNOI) to generate photon pairs at telecom wavelengths using spontaneous parametric down-conversion (SPDC). Specifically, we investigate lateral leakage for all possible SPDC processes involving type 0, type I, and type II phase matching conditions in an X-cut lithium niobate waveguide and provide a recipe to avoid leakage loss for the interacting photons. Furthermore, focusing on type II phase matching, we engineer the waveguide in the single-mode regime such that it also satisfies group index matching for generating spectrally pure single photons with high purity (99.33%). We also address fabrication imperfections of the optimized design and find that the spectral purity of the generated photons is robust to fabrication errors. This work offers guidance for the suitable selection of morphological parameters to obtain lossless, single-mode LNOI waveguides for building linear optical circuits and photon pair generation at telecom wavelengths using desired phase-matching conditions.

Journal of Physics B Atomic Molecular and Optical PhysicsJun 27, 20243 citations

Single mode thin film lithium niobate waveguides for the generation of spectrally pure single photons at telecommunication wavelengths

Muskan Arora, Pranav Chokkara, Jasleen Lugani

In this work, we focus on optimizing waveguides based on Lithium Niobate on Insulator (LNOI) for the generation of cross-polarized spectrally pure photons at telecommunication wavelength using type II spontaneous Parametric Down-Conversion (SPDC) process. Our optimization process is based on avoiding lateral leakage losses for all the modes involved in considered SPDC process by choosing waveguide parameters appropriately. In addition, we also ensure single mode operation for all the interacting wavelengths. We further engineer the waveguide such that it satisfies group index matching for generating spectrally pure single photons with high purity (⪆95 %). Such single-mode and loss-free waveguides are poised to have broad applications in both classical and quantum optical fields.

SPIE Quantum TechnologiesApr 5, 20240 citations

On-chip generation and manipulation of quantum states of light in thin-film lithium niobate

CJ Xin

Within the last decade, thin-film lithium niobate (TFLN) has emerged as a leading integrated photonics platform with immediate applications in classical communications. Concurrently, TFLN components tailored to the requirements of photonic quantum information processing have also garnered considerable interest. Chief among these is the quasi-phase matched (QPM) nonlinear frequency mixer—implemented via periodic domain inversion in ferroelectric lithium niobate—which can be used to generate photon pairs, squeezed states of light, and to perform single photon frequency conversion. Here, we demonstrate progress towards realizing a spectrally separable photon pair source in lithium niobate via waveguide dispersion engineering—a technique uniquely enabled by sub-wavelength optical mode confinement in the thin-film platform. Subsequently, we design optimize a scalable fabrication process to produce QPM TFLN devices for applications that require strict adherence to a specified operating wavelength, such as quantum frequency conversion in a quantum communications network. Finally, we explore how high-performance electro-optic devices can be combined with these nonlinear optical devices to realize a multi-functional platform in which quantum states of light can be generated and manipulated within a single, compact photonic integrated circuit.

Jan 1, 20250 citations