In this work, we present the first implementation of the transcorrelated electronic Hamiltonian in an optimization procedure for matrix product states by the density matrix renormalization group (DMRG) algorithm. In the transcorrelation ansatz, the electronic Hamiltonian is similarity-transformed with a Jastrow factor to describe the cusp in the wave function at electron–electron coalescence. As a result, the wave function is easier to approximate accurately with the conventional expansion in terms of one-particle basis functions and Slater determinants. The transcorrelated Hamiltonian in first quantization comprises up to three-body interactions, which we deal with in the standard way by applying robust density fitting to two- and three-body integrals entering the second-quantized representation of this Hamiltonian. The lack of hermiticity of the transcorrelated Hamiltonian is taken care of along the lines of the first work on transcorrelated DMRG [ J. Chem. Phys. 2020, 153, 164115] by encoding it as a matrix product operator and optimizing the corresponding ground state wave function with imaginary-time time-dependent DMRG. We demonstrate our quantum chemical transcorrelated DMRG approach at the example of several atoms and first-row diatomic molecules. We show that transcorrelation improves the convergence rate to the complete basis set limit in comparison to conventional DMRG. Moreover, we study extensions of our approach that aim at reducing the cost of handling the matrix product operator representation of the transcorrelated Hamiltonian.
In this work, we present the first implementation of the transcorrelated electronic Hamiltonian in an optimization procedure for matrix product states by the density matrix renormalization group (DMRG) algorithm. In the transcorrelation ansatz, the electronic Hamiltonian is similarity-transformed with a Jastrow factor to describe the cusp in the wave function at electron–electron coalescence. As a result, the wave function is easier to approximate accurately with the conventional expansion in terms of one-particle basis functions and Slater determinants. The transcorrelated Hamiltonian in first quantization comprises up to three-body interactions, which we deal with in the standard way by applying robust density fitting to two- and three-body integrals entering the second-quantized representation of this Hamiltonian. The lack of hermiticity of the transcorrelated Hamiltonian is taken care of along the lines of the first work on transcorrelated DMRG [ J. Chem. Phys. 2020, 153, 164115] by encoding it as a matrix product operator and optimizing the corresponding ground state wave function with imaginary-time time-dependent DMRG. We demonstrate our quantum chemical transcorrelated DMRG approach at the example of several atoms and first-row diatomic molecules. We show that transcorrelation improves the convergence rate to the complete basis set limit in comparison to conventional DMRG. Moreover, we study extensions of our approach that aim at reducing the cost of handling the matrix product operator representation of the transcorrelated Hamiltonian.
We present the theory of a density matrix renormalization group (DMRG) algorithm which can solve for both the ground and excited states of non-Hermitian transcorrelated Hamiltonians and show applications in molecular systems. Transcorrelation (TC) accelerates the basis set convergence rate by including known physics (such as, but not limited to, the electron-electron cusp) in the Jastrow factor used for the similarity transformation. It also improves the accuracy of approximate methods such as coupled cluster singles and doubles (CCSD) as shown by recent studies. However, the non-Hermiticity of the TC Hamiltonians poses challenges for variational methods like DMRG. Imaginary-time evolution on the matrix product state (MPS) in the DMRG framework has been proposed to circumvent this problem, but this is currently limited to treating the ground state and has lower efficiency than the time-independent DMRG (TI-DMRG) due to the need to eliminate Trotter errors. In this work, we show that with minimal changes to the existing TI-DMRG algorithm, namely, replacing the original Davidson solver with the general Davidson solver to solve the non-Hermitian effective Hamiltonians at each site for a few low-lying right eigenstates, and following the rest of the original DMRG recipe, one can find the ground and excited states with improved efficiency compared to the original DMRG when extrapolating to the infinite bond dimension limit in the same basis set. An accelerated basis set convergence rate is also observed, as expected, within the TC framework.
Explicitly correlated methods, such as the transcorrelated method which shifts a Jastrow or Gutzwiller correlator from the wave function to the Hamiltonian, are designed for high-accuracy calculations of electronic structures, but their application to larger systems has been hampered by the computational cost. We develop improved techniques for the transcorrelated density-matrix renormalization group (DMRG), in which the ground state of the transcorrelated Hamiltonian is represented as a matrix product state (MPS), and demonstrate large-scale calculations of the ground-state energy of the two-dimensional Fermi-Hubbard model. Our developments stem from three technical inventions: (i) constructing matrix product operators (MPOs) of transcorrelated Hamiltonians with low bond dimension and high sparsity, (ii) exploiting the entanglement structure of the ground states to increase the accuracy of the MPS representation, and (iii) optimizing the nonlinear parameter of the Gutzwiller correlator to mitigate the nonvariational nature of the transcorrelated method. We examine systems of size up to $12\ifmmode\times\else\texttimes\fi{}12$ lattice sites, four times larger than previous transcorrelated DMRG studies, and demonstrate that transcorrelated DMRG yields significant improvements over standard nontranscorrelated DMRG for equivalent computational effort. Transcorrelated DMRG reduces the error of the ground-state energy by $2.4\ifmmode\times\else\texttimes\fi{}$--$14\ifmmode\times\else\texttimes\fi{}$, with the smallest improvement seen for a small system at half filling and the largest improvement in a dilute closed-shell system.
We present the theory of a density matrix renormalization group (DMRG) algorithm which can solve for both the ground and excited states of non-Hermitian transcorrelated Hamiltonians, and show applications in \emph{ab initio} molecular systems. Transcorrelation (TC) accelerates the basis set convergence rate by including known physics (such as, but not limited to, the electron-electron cusp) in the Jastrow factor used for the similarity transformation. It also improves the accuracy of approximate methods such as coupled cluster singles and doubles (CCSD) as shown by some recent studies. However, the non-Hermiticity of the TC Hamiltonians poses challenges for variational methods like DMRG. Imaginary-time evolution on the matrix product state (MPS) in the DMRG framework has been proposed to circumvent this problem; but this is currently limited to treating the ground state, and has lower efficiency than the time-independent DMRG (TI-DMRG), due to the need to eliminate Trotter errors. In this work, we show that with minimal changes to the existing TI-DMRG algorithm, namely replacing the original Davidson solver with the general Davidson solver to solve the non-Hermitian effective Hamiltonians at each site for a few low-lying right eigenstates, and following the rest of the original DMRG recipe, one can find the ground and excited states with improved efficiency compared to the original DMRG when extrapolating to the infinite bond dimension limit in the same basis set. Accelerated basis set convergence rate is also observed, as expected, within the TC framework.
We introduce the transcorrelated Density Matrix Renormalization Group (tcDMRG) theory for the efficient approximation of the energy for strongly correlated systems. tcDMRG encodes the wave function as a product of a fixed Jastrow or Gutzwiller correlator and a matrix product state. The latter is optimized by applying the imaginary-time variant of time-dependent (TD) DMRG to the non-Hermitian transcorrelated Hamiltonian. We demonstrate the efficiency of tcDMRG with the example of the two-dimensional Fermi-Hubbard Hamiltonian, a notoriously difficult target for the DMRG algorithm, for different sizes, occupation numbers, and interaction strengths. We demonstrate fast energy convergence of tcDMRG, which indicates that tcDMRG could increase the efficiency of standard DMRG beyond quasi-monodimensional systems and provides a generally powerful approach toward the dynamic correlation problem of DMRG.
The transcorrelated (TC) method dramatically accelerates the convergence of correlated calculations toward the complete-basis-set (CBS) limit by folding a Jastrow correlator into the Hamiltonian via a similarity transformation, incorporating the electron--electron cusp into the effective interaction. We make the TC framework practical for large systems and flexible, multi-center correlators by compressing the grid-evaluated TC integrals with the interpolative separable density-fitting (ISDF) approximation, combined with the effective two-body (xTC) treatment of the three-body operator. This low-rank representation reduces storage and integration costs by orders of magnitude, and a multi-GPU implementation with automatic differentiation of the correlator makes the construction routine for large basis sets. We demonstrate the resulting ISDF-xTC-CCSD method on the linear hydrogen chain, reaching the joint thermodynamic and CBS limits with basis sets up to cc-pV5Z in agreement with state-of-the-art many-body references to within about 1~mHa/atom, and on the benzene ground-state energy with up to 1200 orbitals (cc-pCV5Z), where the method attains state-of-the-art accuracy at the coupled cluster singles and doubles level and its CBS extrapolation is markedly more robust than that of conventional coupled-cluster methods.
Simulation of electronic structure is one of the most promising applications on noisy intermediate-scale quantum (NISQ) era devices. However, NISQ devices suffer from a number of challenges like limited qubit connectivity, short coherence times, and sizable gate error rates. Thus, desired quantum algorithms should require shallow circuit depths and low qubit counts to take advantage of these devices. Here, we attempt to reduce quantum resource requirements for molecular simulations on a quantum computer while maintaining the desired accuracy with the help of classical quantum chemical theories of canonical transformation and explicit correlation. In this work, compact ab initio Hamiltonians are generated classically, in the second quantized form, through an approximate similarity transformation of the Hamiltonian with (a) an explicitly correlated two-body unitary operator with generalized pair excitations that remove the Coulombic electron-electron singularities from the Hamiltonian and (b) a unitary one-body operator to efficiently capture the orbital relaxation effects required for accurate description of the excited states. The resulting transcorrelated Hamiltonians are able to describe both the ground and the excited states of molecular systems in a balanced manner. Using the variational quantum eigensolver (VQE) method based on the unitary coupled cluster with singles and doubles (UCCSD) ansatz and only a minimal basis set (ANO-RCC-MB), we demonstrate that the transcorrelated Hamiltonians can produce ground state energies comparable to the reference CCSD energies with the much larger cc-pVTZ basis set. This leads to a reduction in the number of required CNOT gates by more than 3 orders of magnitude for the chemical species studied in this work. Furthermore, using the quantum equation of motion (qEOM) formalism in conjunction with the transcorrelated Hamiltonian, we are able to reduce the deviations in the excitation energies from the reference EOM-CCSD/cc-pVTZ values by an order of magnitude. The transcorrelated Hamiltonians developed here are Hermitian and contain only one- and two-body interaction terms and thus can be easily combined with any quantum algorithm for accurate electronic structure simulations.