Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2112.14998 · SciPost Physics

Optimal control of a quantum sensor: A fast algorithm based on an analytic solution

Santiago Hernández-Gómez, Federico Balducci, Giovanni Fasiolo, Paola Cappellaro, Nicole Fabbri, Antonello Scardicchio

Published Jul 4, 2024• 10 citations
arXivHTMLPDF

Abstract

Quantum sensors can show unprecedented sensitivities, provided they are controlled in a very specific, optimal way. Here, we consider a spin sensor of time-varying fields in the presence of dephasing noise, and we show that the problem of finding the pulsed control field that optimizes the sensitivity (i.e., the smallest detectable signal) can be mapped to the determination of the ground state of a spin chain. We find an approximate but analytic solution of this problem, which provides a lower bound for the sensitivity and a pulsed control very close to optimal, which we further use as initial guess for realizing a fast simulated annealing algorithm. We experimentally demonstrate the sensitivity improvement for a spin-qubit magnetometer based on a nitrogen-vacancy center in diamond.

DOI
10.21468/scipostphys.17.1.004

Related papers

Optimal control of a quantum sensor: A fast algorithm based on an analytic solution

Antonello Scardicchio, Santiago Hernández-Gómez, Federico Balducci +3 more

Abstract Quantum sensors can show unprecedented sensitivities, provided they are controlled in a very specific, optimal way. Here, we consider a spin sensor of time-varying fields in the presence of dephasing noise, and we show that the problem of finding the optimal pulsed control field can be mapped to the determination of the ground state of a spin chain. We find an approximate but analytic solution of this problem, which provides a \emph{lower bound} for the sensor sensitivity, and a pulsed control very close to optimal, which we further use as initial guess for realizing a fast simulated annealing algorithm. We experimentally demonstrate the sensitivity improvement for a spin-qubit magnetometer based on a nitrogen-vacancy center in diamond.

•May 17, 2022•3 citations

Optimal quantum control of a spin qubit in diamond for biosensing

Santiago Hernández-Gómez, Federico Balducci, Paola Cappellaro +2 more

The nitrogen-vacancy (NV) center in diamond is a quantum defect in diamond with unique properties for use in high-sensitive, high-resolution quantum sensors of magnetic fields. One of the most interesting and challenging application of NV quantum sensors is nanoscale magnetic resonance imaging (nano-MRI), which would enable to address single biomolecules. To this goal, improving the sensitivity of the NV sensor is a crucial task. Here, we present a quantum optimal control method that optimizes the sensitivity of NV sensor to specific weak magnetic signals with biologically-relevant, complex spectrum. The method, based on the mapping of the sensing problem on a problem of energy optimization of an Ising chain, allows us to improve sensitivity by three orders of magnitude compared to standard control sequences.

IEEE International Workshop on Metrology for Industry 4.0 & IoT (MetroInd4.0&IoT)•Jun 7, 2022•1 citation

Optimal Control of Coupled Sensor-Ancilla Qubits for Multiparameter Estimation

Ayumi Kanamoto, Takuya Isogawa, Shunsuke Nishimura +2 more

Designing optimal control for multiparameter quantum sensing is essential for approaching the ultimate precision limits. However, analytical solutions are generally available only for simple systems, while realistic scenarios often involve coupled qubits and time-dependent Hamiltonians. Here we numerically investigate optimal control of a two-qubit sensor-ancilla system coupled via an Ising term using Gradient Ascent Pulse Engineering (GRAPE) to minimize the objective function. By seeding the optimization recursively with solutions obtained for smaller coupling strengths and selecting a suitable initial guess, we achieve robust convergence and high precision across a wide range of interaction strengths and field configurations. The proposed approach offers a practical route toward high-sensitivity, robust multiparameter magnetometry and it is applicable to solid-state quantum sensors such as nitrogen-vacancy (NV) centers in realistic experimental settings.

quant-pharXiv:2512.11673•Dec 15, 2025•0 citations

Optimal control and glassiness in quantum sensing

Christopher I. Timms, Michael Kolodrubetz

Quantum systems are powerful detectors with wide-ranging applications from scanning probe microscopy of materials to biomedical imaging. Nitrogen vacancy (NV) centers in diamond, for instance, can be operated as qubits for sensing of magnetic field, temperature, or related signals. By well-designed application of pulse sequences, experiments can filter this signal from environmental noise, allowing extremely sensitive measurements with single NV centers. Recently, optimal control has been used to further improve sensitivity by modification of the pulse sequence, most notably by optimal placement of $π$ pulses. Here we consider extending beyond $π$ pulses, exploring optimization of a continuous, time-dependent control field. We show that the difficulty of optimizing these protocols can be mapped to the difficulty of finding minimum free energy in a classical frustrated spin system. While most optimizations we consider show autocorrelations of the sensing protocol that grow as a power law -- similar to an Ising spin glass -- the continuous control shows slower logarithmic growth, suggestive of a harder Heisenberg-like glassy landscape.

arXiv:2406.03627•Physical review. B./Physical review. B•May 12, 2025•0 citations

Optimal control for quantum detectors

Paraj Titum, Kevin Schultz, Alireza Seif +2 more

Abstract Quantum systems are promising candidates for sensing of weak signals as they can be highly sensitive to external perturbations, thus providing excellent performance when estimating parameters of external fields. However, when trying to detect weak signals that are hidden by background noise, the signal-to-noise ratio is a more relevant metric than raw sensitivity. We identify, under modest assumptions about the statistical properties of the signal and noise, the optimal quantum control to detect an external signal in the presence of background noise using a quantum sensor. Interestingly, for white background noise, the optimal solution is the simple and well-known spin-locking control scheme. Using numerical techniques, we further generalize these results to the case of background noise with a Lorentzian spectrum. We show that for increasing correlation time, pulse based sequences, such as CPMG, are also close to the optimal control for detecting the signal, with the crossover dependent on the signal frequency. These results show that an optimal detection scheme can be easily implemented in near-term quantum sensors without the need for complicated pulse shaping.

arXiv:2005.05995•npj Quantum Information•Mar 25, 2021•17 citations

Robust quantum control using hybrid pulse engineering

M. Harshanth Ram, V. R. Krithika, Priya Batra +1 more

The development of efficient algorithms that generate robust quantum controls is crucial for the realization of quantum technologies. The commonly used gradient-based optimization algorithms are limited by their sensitivity to the initial guess, which affects their performance. Here we propose combining the gradient method with the simulated annealing technique to formulate a hybrid algorithm. Our numerical analysis confirms its superior convergence rate. Using the hybrid algorithm, we generate spin-selective $\ensuremath{\pi}$ pulses and employ them for experimental measurement of local noise spectra in a three-qubit nuclear magnetic resonance system. Moreover, here we describe a general method to construct noise-resilient quantum controls by incorporating noisy fields within the optimization routine of the hybrid algorithm. Upon experimental comparison with similar sequences obtained from standard algorithms, we find remarkable robustness of the hybrid sequences against dephasing errors.

arXiv:2112.01279•Physical Review A•Apr 28, 2022•16 citations
Quantum sensors can show unprecedented sensitivities, provided they are controlled in a very specific, optimal way. Here, we consider a spin sensor of time-varying fields in the presence of dephasing noise, and we show that the problem of finding the pulsed control field that optimizes the sensitivity (i.e., the smallest detectable signal) can be mapped to the determination of the ground state of a spin chain. We find an approximate but analytic solution of this problem, which provides a lower bound for the sensitivity and a pulsed control very close to optimal, which we further use as initial guess for realizing a fast simulated annealing algorithm. We experimentally demonstrate the sensitivity improvement for a spin-qubit magnetometer based on a nitrogen-vacancy center in diamond.
Abstract Quantum sensors can show unprecedented sensitivities, provided they are controlled in a very specific, optimal way. Here, we consider a spin sensor of time-varying fields in the presence of dephasing noise, and we show that the problem of finding the optimal pulsed control field can be mapped to the determination of the ground state of a spin chain. We find an approximate but analytic solution of this problem, which provides a \emph{lower bound} for the sensor sensitivity, and a pulsed control very close to optimal, which we further use as initial guess for realizing a fast simulated annealing algorithm. We experimentally demonstrate the sensitivity improvement for a spin-qubit magnetometer based on a nitrogen-vacancy center in diamond.
The nitrogen-vacancy (NV) center in diamond is a quantum defect in diamond with unique properties for use in high-sensitive, high-resolution quantum sensors of magnetic fields. One of the most interesting and challenging application of NV quantum sensors is nanoscale magnetic resonance imaging (nano-MRI), which would enable to address single biomolecules. To this goal, improving the sensitivity of the NV sensor is a crucial task. Here, we present a quantum optimal control method that optimizes the sensitivity of NV sensor to specific weak magnetic signals with biologically-relevant, complex spectrum. The method, based on the mapping of the sensing problem on a problem of energy optimization of an Ising chain, allows us to improve sensitivity by three orders of magnitude compared to standard control sequences.
Designing optimal control for multiparameter quantum sensing is essential for approaching the ultimate precision limits. However, analytical solutions are generally available only for simple systems, while realistic scenarios often involve coupled qubits and time-dependent Hamiltonians. Here we numerically investigate optimal control of a two-qubit sensor-ancilla system coupled via an Ising term using Gradient Ascent Pulse Engineering (GRAPE) to minimize the objective function. By seeding the optimization recursively with solutions obtained for smaller coupling strengths and selecting a suitable initial guess, we achieve robust convergence and high precision across a wide range of interaction strengths and field configurations. The proposed approach offers a practical route toward high-sensitivity, robust multiparameter magnetometry and it is applicable to solid-state quantum sensors such as nitrogen-vacancy (NV) centers in realistic experimental settings.
Quantum systems are powerful detectors with wide-ranging applications from scanning probe microscopy of materials to biomedical imaging. Nitrogen vacancy (NV) centers in diamond, for instance, can be operated as qubits for sensing of magnetic field, temperature, or related signals. By well-designed application of pulse sequences, experiments can filter this signal from environmental noise, allowing extremely sensitive measurements with single NV centers. Recently, optimal control has been used to further improve sensitivity by modification of the pulse sequence, most notably by optimal placement of πππ pulses. Here we consider extending beyond πππ pulses, exploring optimization of a continuous, time-dependent control field. We show that the difficulty of optimizing these protocols can be mapped to the difficulty of finding minimum free energy in a classical frustrated spin system. While most optimizations we consider show autocorrelations of the sensing protocol that grow as a power law -- similar to an Ising spin glass -- the continuous control shows slower logarithmic growth, suggestive of a harder Heisenberg-like glassy landscape.
Abstract Quantum systems are promising candidates for sensing of weak signals as they can be highly sensitive to external perturbations, thus providing excellent performance when estimating parameters of external fields. However, when trying to detect weak signals that are hidden by background noise, the signal-to-noise ratio is a more relevant metric than raw sensitivity. We identify, under modest assumptions about the statistical properties of the signal and noise, the optimal quantum control to detect an external signal in the presence of background noise using a quantum sensor. Interestingly, for white background noise, the optimal solution is the simple and well-known spin-locking control scheme. Using numerical techniques, we further generalize these results to the case of background noise with a Lorentzian spectrum. We show that for increasing correlation time, pulse based sequences, such as CPMG, are also close to the optimal control for detecting the signal, with the crossover dependent on the signal frequency. These results show that an optimal detection scheme can be easily implemented in near-term quantum sensors without the need for complicated pulse shaping.
The development of efficient algorithms that generate robust quantum controls is crucial for the realization of quantum technologies. The commonly used gradient-based optimization algorithms are limited by their sensitivity to the initial guess, which affects their performance. Here we propose combining the gradient method with the simulated annealing technique to formulate a hybrid algorithm. Our numerical analysis confirms its superior convergence rate. Using the hybrid algorithm, we generate spin-selective $\ensuremath{\pi}$ pulses and employ them for experimental measurement of local noise spectra in a three-qubit nuclear magnetic resonance system. Moreover, here we describe a general method to construct noise-resilient quantum controls by incorporating noisy fields within the optimization routine of the hybrid algorithm. Upon experimental comparison with similar sequences obtained from standard algorithms, we find remarkable robustness of the hybrid sequences against dephasing errors.