Abstract The physical problem behind informationally complete (IC) measurements is determining an unknown state statistically by measurement outcomes, known as state tomography. It is of central importance in quantum information processing such as channel estimating, device testing, quantum key distribution, etc. However, constructing such measurements with good properties is a long‐standing problem. In this work, projective realizations of IC measurements are investigated. Conditions of informational completeness are presented with proofs first. Then the projective realizations of IC measurements, including proposing the first general construction of minimal projective IC measurements (MPICM) in no prime power dimensional systems, as well as determining an unknown state in via a single projective measurement with some kinds of optimalities in a larger system, are investigated. Finally, The results can be extended to local state tomography. Some discussions on employing several kinds of optimalities are also provided.
Abstract The physical problem behind informationally complete (IC) measurements is determining an unknown state statistically by measurement outcomes, known as state tomography. It is of central importance in quantum information processing such as channel estimating, device testing, quantum key distribution, etc. However, constructing such measurements with good properties is a long‐standing problem. In this work, projective realizations of IC measurements are investigated. Conditions of informational completeness are presented with proofs first. Then the projective realizations of IC measurements, including proposing the first general construction of minimal projective IC measurements (MPICM) in no prime power dimensional systems, as well as determining an unknown state in via a single projective measurement with some kinds of optimalities in a larger system, are investigated. Finally, The results can be extended to local state tomography. Some discussions on employing several kinds of optimalities are also provided.
Informationally complete (IC) measurements are a useful class of measurements, as their outcome statistics uniquely determine an unknown quantum state. Hence, they are important for certain tasks such as quantum state tomography, quantum process tomography, etc. In this work, we study the quantification of informational completeness for arbitrary quantum measurements by introducing and characterizing a faithful measure for it. We explicitly evaluate the informational completeness of qubit symmetric informationally complete (SIC) measurements and show that it is an upper bound for all qubit minimal informationally complete measurements. Furthermore, by introducing a faithful measure, we try to quantify and characterize the ability of an arbitrary quantum channel to preserve the informational completeness of any IC measurement when the channel acts on it in the Heisenberg picture. We call this measure informational completeness-preservability (IC preservability) of quantum channels. After studying its properties, we establish its relation to another quantity, namely, the absolute output coherence of a quantum channel, which quantifies the minimum amount of coherence (w.r.t. an arbitrary incoherent basis) that can always be obtained from the output of that channel. Finally, we illustrate our results with an example from light-matter interaction scenarios. Thus, in this work, not only do we try to provide a quantitative framework for studying both the informational completeness of quantum measurements and the ability of quantum channels to preserve it, but we also try to offer key insight into the conceptual relation between informational completeness and quantum coherence.
d+1 Measurement Bases are Sufficient for Determining d-Dimensional Quantum States: Theory and Experiment
A long-standing problem in quantum physics is to determine the minimal number of measurement bases required for the complete characterization of unknown quantum states, a question of particular relevance to high-dimensional quantum information processing. Here, we propose a quantum state tomography scheme that requires only d+1 projective measurement bases to fully reconstruct an arbitrary d-dimensional quantum state. As a proof-of-principle, we experimentally verified this scheme on a silicon photonic chip by reconstructing quantum states for d=6, in which a complete set of mutually unbiased bases does not exist. This approach offers new perspectives for quantum state characterization and measurement design, and holds promise for future applications in quantum information processing.
Quantum State Tomography (QST), Quantum Process Tomography (QPT), and Quantum Network Tomography (QNT) are related parameter-estimation problems that aim to reconstruct different physical quantities. QST estimates an unknown quantum state, represented by its density matrix, from the measurement outcomes. QPT characterises an unknown quantum channel using known input states and measurements of the corresponding outputs. QNT, in contrast, aims to infer parameters associated with individual links from end-to-end probe measurements collected at accessible monitor nodes. A key distinction among the three tomography problems lies in the conditions required to achieve identifiability, the ability to determine unknown parameters uniquely from the available measurement statistics. In QST and QPT, the experimenter can choose an Informationally Complete (IC) measurement set. QNT limits the reachable measurements to what topology and monitor placement allow, so the admissible probe paths fix the information available about the link parameters. This work studies all three tomography problems through a common Fisher Information Matrix (FIM). We factorise QNT FIM and show that its rank equals the rank of the path-link incidence matrix at every interior parameter value, so local and global identifiability coincide. We then show that QST and QPT attain full rank under IC settings, QNT loses rank when the probe paths leave link parameters indistinguishable, and increasing the number of copies scales the FIM eigenvalues while leaving its rank fixed.
This thesis will focus on deriving informationally-optimal quantum state tomographic measurements on single-qubit systems, with the definition of informationally optimal to be defined as those measurements which maximize the average information gain. The informationally-optimal measurements that will be covered include projective measurements (formally building off of the work of [1] and putting it on firm, information-theoretic foundations), and more general types of quantum measurements called directional (also known as rank-one) positive operator-valued measure (POVM) measurements, and, finally, adaptive directional POVM measurements. For projective measurements, we build on the work of Wootters and Fields ([1]) and show, via analytical methods and maximizing the average information gained from the measurements, that orthogonal projective measurements are optimal. We then go on to define what we call directional POVMs, which are POVMs whose elements are given by weighted projection operators. We consider these measurements in the context of static quantum state tomography (QST), wherein we use the same choice of measurement throughout our analysis/experiment. By examining these directional POVMs acting on single qubit systems, we show that the most informationally optimal of these types of measurements are informationally complete directional POVMs that are both minimal, informationally complete (MIC) and symmetric, informationally complete (SIC) POVMs, simultaneously. Finally, we deal with the case of adaptive directional POVM measurements.
Informationally complete measurements allow the estimation of expectation values of any operator on a quantum system, by changing only the data processing of the measurement outcomes. In particular, an informationally complete measurement can be used to perform quantum tomography, namely to estimate the density matrix of the quantum state. The data processing is generally nonunique, and can be optimized according to a given criterion. In this paper we provide the solution of the optimization problem which minimizes the variance in the estimation. We then consider informationally complete measurements performed over bipartite quantum systems focusing attention on universally covariant measurements, and compare their statistical efficiency when performed either locally or globally on the two systems. Among global measurements we consider the special case of Bell measurements, which allow us to estimate the expectation of a restricted class of operators. We compare the variance in the three cases: local, Bell, and unrestricted global---and derive conditions for the operators to be estimated such that one type of measurement is more efficient than the other. In particular, we find that for factorized operators and Bell projectors the Bell measurement always performs better than the unrestricted global measurement, which in turn outperforms the local one. For estimation of the matrix elements of the density operator, the relative performances depend on the basis on which the state is represented, and on the matrix element being diagonal or off-diagonal, however, with the global unrestricted measurement generally performing better than the local one.
Generalized symmetric informationally complete (SIC) measurements are SIC measurements that are not necessarily rank 1. They are interesting originally because of their connection with rank-1 SICs. Here we reveal several merits of generalized SICs in connection with quantum state tomography and Lie algebra that are interesting in their own right. These properties uniquely characterize generalized SICs among minimal informationally complete (IC) measurements although, on the face of it, they bear little resemblance to the original definition. In particular, we show that in quantum state tomography generalized SICs are optimal among minimal IC measurements with given average purity of measurement outcomes. Besides its significance to the current study, this result may help us to understand tomographic efficiencies of minimal IC measurements under the influence of noise. When minimal IC measurements are taken as bases for the Lie algebra of the unitary group, generalized SICs are uniquely characterized by the antisymmetry of the associated structure constants.