In continuous-variable quantum computing with qubits encoded in the infinite-dimensional Hilbert space of bosonic modes, it is a difficult task to realize strong and on-demand interactions between the qubits. One option is to engineer a beamsplitter interaction for photons in two superconducting cavities by driving an intermediate superconducting circuit with two continuous-wave drives, as demonstrated in a recent experiment [Gao et al., Phys. Rev. X 8, 021073 (2018)]. Here we show how quantum optimal control theory (OCT) can be used in a systematic way to improve the beamsplitter interaction between the two cavities. We find that replacing the two-tone protocol by a three-tone protocol accelerates the effective beamsplitter rate between the two cavities. The third tone's amplitude and frequency are determined by gradient-free optimization and make use of cavity-transmon sideband couplings. We show how to further improve the three-tone protocol via gradient-based optimization while keeping the optimized drives experimentally feasible. Our work exemplifies how to use OCT to systematically improve practical protocols in quantum information applications.
In continuous-variable quantum computing with qubits encoded in the infinite-dimensional Hilbert space of bosonic modes, it is a difficult task to realize strong and on-demand interactions between the qubits. One option is to engineer a beamsplitter interaction for photons in two superconducting cavities by driving an intermediate superconducting circuit with two continuous-wave drives, as demonstrated in a recent experiment [Gao et al., Phys. Rev. X 8, 021073 (2018)]. Here we show how quantum optimal control theory (OCT) can be used in a systematic way to improve the beamsplitter interaction between the two cavities. We find that replacing the two-tone protocol by a three-tone protocol accelerates the effective beamsplitter rate between the two cavities. The third tone's amplitude and frequency are determined by gradient-free optimization and make use of cavity-transmon sideband couplings. We show how to further improve the three-tone protocol via gradient-based optimization while keeping the optimized drives experimentally feasible. Our work exemplifies how to use OCT to systematically improve practical protocols in quantum information applications.
Encoding a qubit in a high quality superconducting microwave cavity offers the opportunity to perform the first layer of error correction in a single device, but presents a challenge: how can quantum oscillators be controlled while introducing a minimal number of additional error channels? We focus on the two-qubit portion of this control problem by using a 3-wave mixing coupling element to engineer a programmable beamsplitter interaction between two bosonic modes separated by more than an octave in frequency, without introducing major additional sources of decoherence. Combining this with single-oscillator control provided by a dispersively coupled transmon provides a framework for quantum control of multiple encoded qubits. The beamsplitter interaction gbs is fast relative to the timescale of oscillator decoherence, enabling over 103 beamsplitter operations per coherence time, and approaching the typical rate of the dispersive coupling χ used for individual oscillator control. Further, the programmable coupling is engineered without adding unwanted interactions between the oscillators, as evidenced by the high on-off ratio of the operations, which can exceed 105. We then introduce a new protocol to realize a hybrid controlled-SWAP operation in the regime gbs≈χ, in which a transmon provides the control bit for the SWAP of two bosonic modes. Finally, we use this gate in a SWAP test to project a pair of bosonic qubits into a Bell state with measurement-corrected fidelity of 95.5%±0.2%.
High-coherence superconducting cavities offer a hardware-efficient platform for quantum information processing. To achieve universal operations of these bosonic modes, the requisite nonlinearity is realized by coupling them to a transmon ancilla. However, this configuration is susceptible to crosstalk errors in the dispersive regime, where the ancilla frequency is Stark shifted by the state of each coupled bosonic mode. This leads to a frequency mismatch of the ancilla drive, lowering the gate fidelities. To mitigate such coherent errors, we employ quantum optimal control to engineer ancilla pulses that are robust to the frequency shifts. These optimized pulses are subsequently integrated into a recently developed echoed conditional displacement protocol for executing single- and two-mode operations. Through numerical simulations, we examine two representative scenarios: the preparation of single-mode Fock states in the presence of spectator modes and the generation of two-mode entangled Bell-cat states. Our approach markedly suppresses crosstalk errors, outperforming conventional ancilla control methods by orders of magnitude. These results provide guidance for experimentally achieving high-fidelity multimode operations and pave the way for developing high-performance bosonic quantum information processors.
Photonic states of superconducting microwave cavities controlled by transmon ancillas provide a platform for encoding and manipulating quantum information. A key challenge in scaling up the platform is the requirement to communicate on demand the information between the cavities. It has been recently demonstrated that a tunable bilinear interaction between two cavities can be realized by coupling them to a bichromatically-driven transmon ancilla, which allows swapping and interfering the multi-photon states of the cavities [Gao et al., Phys. Rev. X 8, 021073(2018)]. Here, we explore both theoretically and experimentally the regime of relatively strong drives on the ancilla needed to achieve fast SWAP gates but which can also lead to undesired non-perturbative effects that lower the SWAP fidelity. We develop a theoretical formalism based on linear response theory that allows one to calculate the rate of ancilla-induced interaction, decay and frequency shift of the cavities in terms of a susceptibility matrix. We treat the drives non-perturbatively using Floquet theory, and find that the interference of the two drives can strongly alter the system dynamics even in the regime where the rotating wave approximation applies. We identify two major sources of infidelity due to ancilla decoherence. i) Ancilla dissipation and dephasing leads to incoherent hopping among Floquet states which occurs even when the ancilla is at zero temperature, resulting in a sudden change of the SWAP rate. ii) The cavities inherit finite decay from the relatively lossy ancilla through the inverse Purcell effect; the effect can be enhanced when the drive-induced AC Stark shift pushes certain ancilla transition frequencies to the vicinity of the cavity frequencies. The theoretical predictions agree quantitatively with the experimental results, paving the way for using the theory to design future experiments.
In the circuit quantum electrodynamics architecture, both the resonance frequency and the coupling of superconducting qubits to microwave field modes can be controlled via external electric and magnetic fields to explore qubit-photon dynamics in a wide parameter range. Here, we experimentally demonstrate and analyze a scheme for tuning the coupling between a transmon qubit and a microwave resonator using a single coherent drive tone. We treat the transmon as a three-level system, with the qubit subspace defined by the ground and the second excited states. If the drive frequency matches the difference between the resonator and the qubit frequencies, a Jaynes-Cummings-type interaction is induced, which is tunable in both amplitude and phase. We show that coupling strengths of about 10 MHz can be achieved in our setup, limited only by the anharmonicity of the transmon qubit. This scheme has been successfully used to generate microwave photons with a controlled temporal shape [M. Pechal et al., Phys. Rev. X 4, 041010 (2014)] and can be directly implemented with superconducting quantum devices featuring larger anharmonicity for higher coupling strengths.
Deterministic Fock-state generation and inter-mode SWAP are foundational primitives for bosonic quantum computing, yet most implementations rely on numerically optimized pulses, per-state calibration, strong dispersive coupling, or higher transmon levels, each adding control overhead that grows with system size. We present an analytical, calibration-light protocol operating entirely within the two-level g-e manifold of a weakly dispersively coupled transmon. A Rabi drive on the qubit, combined with a single sideband tone per mode, synthesizes an on-demand Jaynes-Cummings interaction whose entire family of pulse times follows the closed-form scaling τn=τ1/n. Once the single base time τ1 is set, every higher-n operation is fixed analytically, with no per-state retuning, shelving, or numerical optimization. On a superconducting flute cavity with two high-Q modes, we deterministically prepare Fock states through ∣n=5⟩, realize an inter-mode SWAP characterized on vacuum, single-photon, and coherent-state inputs, and generate and coherently swap the dual-rail Bell state (∣1,0⟩+∣0,1⟩)/2, confirming that the operation preserves inter-mode coherence. Because the pulses are constant-amplitude and free of per-state optimization, the achievable fidelity is set directly by ancilla coherence and drive-ramp duration; a master-equation analysis isolates these hardware factors and shows that the analytical scaling itself imposes no obstacle to high-fidelity operation at high n. Requiring only one sideband line per mode and a single Rabi drive, the protocol is well suited to weakly coupled, high-Q 3D architectures where calibration economy and analytical pulse design are at a premium.
In recent years, important progress has been made towards encoding and processing quantum information in the large Hilbert space of bosonic modes. Mechanical resonators have several practical advantages for this purpose, because they confine many high-quality-factor modes into a small volume and can be easily integrated with different quantum systems. However, it is challenging to create direct interactions between different mechanical modes that can be used to emulate quantum gates. Here we demonstrate an in situ tunable beamsplitter-type interaction between several mechanical modes of a high-overtone bulk acoustic-wave resonator. The engineered interaction is mediated by a parametrically driven superconducting transmon qubit, and we show that it can be tailored to couple pairs or triplets of phononic modes. Furthermore, we use this interaction to demonstrate the Hong-Ou-Mandel effect between phonons. Our results lay the foundations for using phononic systems as quantum memories and platforms for quantum simulations.