Characterization of experimental systems is an essential step in developing and improving quantum hardware. A collection of protocols known as Randomized Benchmarking (RB) was developed in the past decade, which provides an efficient way to measure error rates in quantum systems. In a recent paper (arxiv:2010.07974), a general framework for RB was proposed, which encompassed most of the known RB protocols and overcame the limitation on error models in previous works. However, even this general framework has a restriction: it can only be applied to a finite group of gates. This does not meet the need posed by experiments, in particular the demand for benchmarking non-Clifford gates and continuous gate sets on quantum devices. In this work we generalize the RB framework to continuous groups of gates and show that as long as the noise level is reasonably small, the output can be approximated as a linear combination of matrix exponential decays. As an application, we numerically study the fully randomized benchmarking protocol (i.e. RB with the entire unitary group as the gate set) enabled by our proof. This provides a unified way to estimate the gate fidelity for any quantum gate in an experiment.
Characterization of experimental systems is an essential step in developing and improving quantum hardware. A collection of protocols known as Randomized Benchmarking (RB) was developed in the past decade, which provides an efficient way to measure error rates in quantum systems. In a recent paper (arxiv:2010.07974), a general framework for RB was proposed, which encompassed most of the known RB protocols and overcame the limitation on error models in previous works. However, even this general framework has a restriction: it can only be applied to a finite group of gates. This does not meet the need posed by experiments, in particular the demand for benchmarking non-Clifford gates and continuous gate sets on quantum devices. In this work we generalize the RB framework to continuous groups of gates and show that as long as the noise level is reasonably small, the output can be approximated as a linear combination of matrix exponential decays. As an application, we numerically study the fully randomized benchmarking protocol (i.e. RB with the entire unitary group as the gate set) enabled by our proof. This provides a unified way to estimate the gate fidelity for any quantum gate in an experiment.
Randomized benchmarking refers to a collection of protocols that in the past decade have become central methods for characterizing quantum gates.These protocols aim at efficiently estimating the quality of a set of quantum gates in a way that is resistant to state preparation and measurement errors.Over the years many versions have been developed, however a comprehensive theoretical treatment of randomized benchmarking has been missing.In this work, we develop a rigorous framework of randomized benchmarking general enough to encompass virtually all known protocols as well as novel, more flexible extensions.Overcoming previous limitations on error models and gate sets, this framework allows us, for the first time, to formulate realistic conditions under which we can rigorously guarantee that the output of any randomized benchmarking experiment is well described by a linear combination of matrix exponential decays.We complement this with a detailed analysis of the fitting problem associated with randomized benchmarking data.We introduce modern signal processing techniques to randomized benchmarking, prove analytical sample complexity bounds, and numerically evaluate performance and limitations.In order to reduce the resource demands of this fitting problem, we introduce novel, scalable postprocessing techniques to isolate exponential decays, significantly improving the practical feasibility of a large set of randomized benchmarking protocols.These postprocessing techniques overcome shortcomings in efficiency of several previously proposed methods such as character benchmarking and linear-cross entropy benchmarking.Finally, we discuss, in full generality, how and when randomized benchmarking decay rates can be used to infer quality measures like the average fidelity.On the technical side, our work substantially extends the recently developed Fourier-theoretic perspective on randomized benchmarking by making use of the perturbation theory of invariant subspaces, as well as ideas from signal processing.
We show that the Randomized Benchmarking (RB) protocol is a convolution amenable to Fourier space analysis. By adopting the mathematical framework of Fourier transforms of matrix-valued functions on groups established in recent work from Gowers and Hatami \cite{GH15}, we provide an alternative proof of Wallman's \cite{Wallman2018} and Proctor's \cite{Proctor17} bounds on the effect of gate-dependent noise on randomized benchmarking. We show explicitly that as long as our faulty gate-set is close to the targeted representation of the Clifford group, an RB sequence is described by the exponential decay of a process that has exactly two eigenvalues close to one and the rest close to zero. This framework also allows us to construct a gauge in which the average gate-set error is a depolarizing channel parameterized by the RB decay rates, as well as a gauge which maximizes the fidelity with respect to the ideal gate-set.
Randomized benchmarking (RB) protocols are widely used to measure an average error rate for a set of quantum logic gates. However, the standard version of RB is limited because it only benchmarks a processor's native gates indirectly, by using them in composite n -qubit Clifford gates. Standard RB's reliance on n -qubit Clifford gates restricts it to the few-qubit regime, because the fidelity of a typical composite n -qubit Clifford gate decreases rapidly with increasing n . Furthermore, although standard RB is often used to infer the error rate of native gates, by rescaling standard RB's error per Clifford to an error per native gate, this is an unreliable extrapolation. Direct RB is a method that addresses these limitations of standard RB, by directly benchmarking a customizable gate set, such as a processor's native gates. Here we provide a detailed introduction to direct RB, we discuss how to design direct RB experiments, and we present two complementary theories for direct RB. The first of these theories uses the concept of error propagation or scrambling in random circuits to show that direct RB is reliable for gates that experience stochastic Pauli errors. We prove that the direct RB decay is a single exponential, and that the decay rate is equal to the average infidelity of the benchmarked gates, under broad circumstances. This theory shows that group twirling is not required for reliable RB. Our second theory proves that direct RB is reliable for gates that experience general gate-dependent Markovian errors, using similar techniques to contemporary theories for standard RB. Our two theories for direct RB have complementary regimes of applicability, and they provide complementary perspectives on why direct RB works. Together these theories provide comprehensive guarantees on the reliability of direct RB.
Randomized benchmarking (RB) protocols have become an essential tool for providing a meaningful partial characterization of experimental quantum operations. While the RB decay rate is known to enable estimates of the average fidelity of those operations under gate-independent Markovian noise, under gate-dependent noise this rate is more difficult to interpret rigorously. In this paper, we prove that single-qubit RB decay parameter p coincides with the decay parameter of the gate-set circuit fidelity , a novel figure of merit which characterizes the expected average fidelity over arbitrary circuits of operations from the gate-set. We also prove that, in the limit of high-fidelity single-qubit experiments, the possible alarming disconnect between the average gate fidelity and RB experimental results is simply explained by a basis mismatch between the gates and the state-preparation and measurement procedures, that is, to a unitary degree of freedom in labeling the Pauli matrices. Based on numerical evidence and physically motivated arguments, we conjecture that these results also hold for higher dimensions.
Abstract We investigate randomized benchmarking (RB) in a general setting with quantum gates that form a representation, not necessarily an irreducible one, of a finite group. We derive an estimate for the average fidelity, to which experimental data may then be calibrated. Furthermore, we establish that RB can be achieved by the sole implementation of quantum gates that generate the group as well as one additional arbitrary group element. In this case, we need to assume that the noise is close to being covariant. This yields a more practical approach to RB. Moreover, we show that RB is stable with respect to approximate Haar sampling for the sequences of gates. This opens up the possibility of using Markov chain Monte Carlo methods to obtain the random sequences of gates more efficiently. We demonstrate these results numerically using the well-studied example of the Clifford group as well as the group of monomial unitary matrices. For the latter, we focus on the subgroup with nonzero entries consisting of n th roots of unity, which contains T gates.
Benchmarking methods that can be adapted to multiqubit systems are essential for assessing the overall or "holistic" performance of nascent quantum processors. The current industry standard is Clifford randomized benchmarking (RB), which measures a single error rate that quantifies overall performance. But, scaling Clifford RB to many qubits is surprisingly hard. It has only been performed on one, two, and three qubits as of this writing. This reflects a fundamental inefficiency in Clifford RB: the n-qubit Clifford gates at its core have to be compiled into large circuits over the one- and two-qubit gates native to a device. As n grows, the quality of these Clifford gates quickly degrades, making Clifford RB impractical at relatively low n. In this Letter, we propose a direct RB protocol that mostly avoids compiling. Instead, it uses random circuits over the native gates in a device, which are seeded by an initial layer of Clifford-like randomization. We demonstrate this protocol experimentally on two to five qubits using the publicly available ibmqx5. We believe this to be the greatest number of qubits holistically benchmarked, and this was achieved on a freely available device without any special tuning up. Our protocol retains the simplicity and convenient properties of Clifford RB: it estimates an error rate from an exponential decay. But, it can be extended to processors with more qubits-we present simulations on 10+ qubits-and it reports a more directly informative and flexible error rate than the one reported by Clifford RB. We show how to use this flexibility to measure separate error rates for distinct sets of gates, and we use this method to estimate the average error rate of a set of cnot gates.