Jeremy Stevens, Daniel B. Szombati, Maria Maffei, Cyril Elouard, Réouven Assouly, Nathanaël Cottet, Rémy Dassonneville, Quentin Ficheux, Stefan Zeppetzauer, Audrey Bienfait, Andrew N. Jordan, Alexia Auffèves, Benjamin Huard
Qubits are physical, a quantum gate thus not only acts on the information carried by the qubit but also on its energy. What is then the corresponding flow of energy between the qubit and the controller that implements the gate? Here we exploit a superconducting platform to answer this question in the case of a quantum gate realized by a resonant drive field. During the gate, the superconducting qubit becomes entangled with the microwave drive pulse so that there is a quantum superposition between energy flows. We measure the energy change in the drive field conditioned on the outcome of a projective qubit measurement. We demonstrate that the drive's energy change associated with the measurement backaction can exceed by far the energy that can be extracted by the qubit. This can be understood by considering the qubit as a weak measurement apparatus of the driving field.
Qubits are physical, a quantum gate thus not only acts on the information carried by the qubit but also on its energy. What is then the corresponding flow of energy between the qubit and the controller that implements the gate? Here we exploit a superconducting platform to answer this question in the case of a quantum gate realized by a resonant drive field. During the gate, the superconducting qubit becomes entangled with the microwave drive pulse so that there is a quantum superposition between energy flows. We measure the energy change in the drive field conditioned on the outcome of a projective qubit measurement. We demonstrate that the drive's energy change associated with the measurement backaction can exceed by far the energy that can be extracted by the qubit. This can be understood by considering the qubit as a weak measurement apparatus of the driving field.
Quantum computers store and manipulate information in individual quantized energy levels. These devices, not yet realized in their full potential, have the ability to perform certain computational tasks more efficiently than any classical computer. One possible way to implement a quantum computer is to use superconducting circuits controlled by single-mode electromagnetic fields. These circuits constitute the physical quantum bits, or qubits, that are used to store quantum information. A complete, fault-tolerant quantum computer potentially consists of at least millions of physical qubits which are grouped to form fault-tolerant logical qubits. Controlling each physical qubit individually requires a great amount of energy, and hence a future challenge is to reduce the energy consumption in qubit control while maintaining the high precision. In this thesis, we derive a fundamental upper bound for the gate fidelity of a single-qubit not gate implemented with a single resonant driving pulse. It is shown that the upper bound approaches unity inversely proportionally to the increasing mean photon number of the pulse. Furthermore, we find that the upper bound is achieved with an optimal superposition of squeezed states. The typically employed coherent state produces twice as high gate error as the corresponding optimal state. In addition, we present and numerically study a correction protocol that allows using the same drive state for multiple qubit operations. This sustained state is refreshed by sequentially coupling ancillary qubits to it, effectively resetting it and removing entanglement with the previously operated qubits. Thus our protocol allows using the same drive state to implement not gates for different qubits indefinitely, and hence provides a possible route to energy-efficient large-scale quantum computing.
This experimental thesis explores energetic and informational aspects of the fluorescence emitted by superconducting circuits. A quantum bit interacting with a resonant drive exchanges quanta of energy during absorption and emission cycles. Using low- noise amplification and linear detection of microwave light, we have developed a measurement setup to record the energy and complex amplitude of the fluorescence field and realized three experiments based on the record of fluorescence. First, we have realized and demonstrated a transfer of energy between two resonant drives. Owing to the properties of stimulated emission, the direction and magnitude of energy transfer can be controlled by the phase of a quantum superposition of qubit states. Second, we have used the information contained in fluorescence to implement a new readout scheme for superconducting circuits without the help of any ancillary quantum system. The circuit, directly coupled to the environment, encodes quantum information in a well-protected subspace and is read using the fluorescence of a strongly coupled transition. Finally, we have explored the interplay between information and energy in the quantum regime by realizing an autonomous Maxwell's demon. The demon is a cavity measuring the system, a superconducting qubit. Work is extracted in the form of a stimulated photon emitted by the qubit and is directly measured using our fluorescence measurement setup. It is linked with the variations of the system's internal energy. Using independent measurements, the transfer of information from the system to the demon is quantified. In particular, we demonstrated the quantum signatures of the demon when the system is initialized in a quantum superposition.
Quantum measurements are known to affect the state of the measured system. Such a measurement backaction is due to the interaction of the quantum system with the measuring device. When the measured observable and the system's Hamiltonian do not commute, the backaction can lead to a mean energy change of the system. This energy change has been dubbed "quantum heat" and, in association with feedback processes and/or the interaction with thermal bath(s), proves to be a genuinely quantum resource to fuel new kinds quantum engines. We propose such a measurement powered engine exploiting the non-commutativity of local and non-local operations on a bipartite quantum system.We then investigate the origin of the quantum heat. Even if one cannot model the full dynamics of a measurement due to the collapse of the wavefunction, the energetic aspects can still be investigated by modeling the so-called pre-measurement. During this step, the system interacts and gets correlated with a quantum system which can be viewed as a small part of the measuring apparatus and called the quantum meter. Ideally, at the end of this process, the system's reduced state will be fully decohered in the measurement basis, thus corresponding to the averaged collapsed output states given by the measurement postulate. We find that the quantum heat received by the measured system corresponds to the energy necessary to turn off the coupling between the meter and the system. Using generalized definitions of heat and work, we moreover characterize the work and heat nature of these energy exchanges.Tracing the source of this energy one step further, we propose an autonomous description of a measurement. This is done by considering a flying qubit measured by the quantum field of the cavity it crosses. The interaction being position dependent, the kinetic degree of freedom is providing the required energy to switch on and off the interaction between the qubit and the meter field. A full quantum treatment allows us to evaluate the impact of the finite spatial and momentum extension of the qubit wavepacket. Since the kinetic degree of freedom can be affected by the interaction, it does not simply generate a time dependent Hamiltonian for the other degrees of freedom. We find the correction to this ideal dynamic and analyse its consequences on the nature of the energy fluxes. %spread/extension/broadnessTaking the opposite point of view, we compare the measurement cost of a qubit by a field propagating in a waveguide, depending on the initial state of the field. In the context of a circuit quantum electrodynamics setup, we find that thermal and coherent fields induce the same backaction on the qubit given the same energy constraints.The results presented and discussed in this thesis contribute to unravel the mysterious effects and mechanisms due to quantum measurements. Notably, they give an outlook to further analyse quantum measurement-based engines and to understand the energetic resource that measurements cost and constitute at the same time.
In a quantum computer, the information carriers, which are bits in ordinary computers, are implemented as devices that exhibit coherent superpositions of physical states and entanglement. Such components, known as quantum bits or qubits, can be realized with various different types of two-state quantum systems. Quantum computers will be built for computational speed, with hoped for applications especially in cryptography and in other tasks where classical computers remain inefficient. Circuit quantum electrodynamics (cQED) is a quantum-computer architecture which employs superconducting electronic components and microwave photon fields as building blocks. Compared to cavity quantum electrodynamics (CQED), where atoms are trapped in physical cavities, cQED is more attractive in that its qubits are tunable and conveniently integrable with the electronics already in use. This architecture has shown some of the most promising qubit designs, despite their coherence times reaching tens of microseconds, are still below the state of the art with spin qubits, which reach milliseconds. Coherence times are historically the most relevant parameters describing the fitness of a qubit, although these days not necessarily the limiting factor. This thesis presents a comprehensive set of theoretical and experimental methods for measuring the characteristic parameters of superconducting qubits. We especially study transmission-line-shunted plasma oscillation qubits, or transmons, and presents experimental results for a single sample. Transmon capacitively couples a superconducting quantum interference device (SQUID) with a coplanar waveguide (CPW) resonator, often with added frequency tunability utilizing an external magnet. The number of superconducting charge carriers tunnelled through a junction in the SQUID are used as qubit degrees of freedom. Readout of the qubit state is carried out by measuring transmission through the CPW. A cryogenic setup is employed with measurement and driving pulses delivered from microwave sources. Steady-state spectroscopy is employed to determine the resonance frequencies of the qubit and the resonator, qubit-resonator coupling constants, and the energy parameters of the qubit. Pulse-modulated measurements are employed to determine the coherence times of the qubit. The related analysis- and simulation programs and scripts are collected togithub.com/patomaki.
We investigate the anomalous energy change of the measurement apparatus when a qubit is measured in bases that do not commute with energy. We model two possible measurement implementations: one is a quantum clock model with a completely time-independent Hamiltonian, while the other is a Jaynes-Cummings model that is time-dependent but conserves the total excitation number. We look at the mean energy change of the measurement apparatus in both models, conditioned on the qubit postselection, and we find that this change can be much greater than the level spacing of the qubit, like an anomalous weak value. In the clock model, the expression for the apparatus energy shift explicitly contains the weak value of the qubit Hamiltonian. However, in our case, no explicit weak measurements are carried out. Our two models give different results, which we explain to be a consequence of the nondegenerate spectrum of the Jaynes-Cummings model. We compare our calculations in the Jaynes-Cummings model with the experimental data of J. Stevens et al., [Phys. Rev. Lett. 129, 110601 (2022)], and we find good agreement when the conditions of our derivation are valid.
Quantum computers are emerging as a promising new technology due to their ability to solve complex problems that exceed the capabilities of classical systems in terms of time. Among various implementations, superconducting qubits have become the leading technology due to their scalability and compatibility with quantum error correction mechanisms. Although time has traditionally been the primary focus, energetic efficiency is becoming an increasingly important consideration, especially with the possibility of a quantum energetic advantage. In this article, the energy consumption of the Semiclassical Quantum Fourier Transform was analyzed on a superconducting quantum computing platform based on cat qubits. Quantum error correction mechanisms were studied and considered in the energy estimations. The results show how the energy consumption scales with the number of qubits and how the most relevant parameters required for qubit stabilization, gate implementation, and error correction codes contribute to the overall energy usage. An optimization method was developed to tune these parameters with the goal of minimizing energy consumption while maintaining qubit fidelities above a given threshold. Additionally, a comparative study with state-of-the-art classical computers indicates a potential quantum energetic advantage for systems with more than 26 qubits, assuming cryogenic systems operating at Carnot efficiency, with this energetic advantage arising before any computational advantage. This behavior persists even when realistic cryogenic systems and control electronics are taken into account.