arXiv:2108.10780 · Physical review. B./Physical review. B
Unraveling correlated material properties with noisy quantum computers: Natural orbitalized variational quantum eigensolving of extended impurity models within a slave-boson approach
We propose a method for computing space-resolved correlation properties of the two-dimensional Hubbard model within a quantum-classical embedding strategy that uses a noisy, intermediate scale quantum (NISQ) computer to solve the embedded model. While previous approaches were limited to purely local, one-impurity embedded models, requiring at most four qubits and relatively shallow circuits, we solve a two-impurity model requiring eight qubits with an advanced hybrid scheme on top of the variational quantum eigensolver algorithm. This iterative scheme, dubbed natural orbitalization (NOization), gradually transforms the single-particle basis to the approximate natural-orbital basis, in which the ground state can be minimally expressed, at the cost of measuring the one-particle reduced density matrix of the embedded problem. We show that this transformation tends to make the variational optimization of existing (but too deep) Ansatz circuits faster and more accurate, and we propose an Ansatz, the multireference excitation-preserving (MREP) Ansatz, that achieves great expressivity without requiring a prohibitive gate count, thus bridging the gap between hardware-efficient and physically motivated strategies in variational Ansatz design. The one-impurity version of the Ansatz has only one parameter, making the ground-state preparation a trivial step, which supports the optimal character of our approach. Within a rotationally invariant slave boson embedding scheme that requires a minimal number of bath sites and does not require computing the full Green's function, the NOization combined with the MREP Ansatz allow us to compute accurate, space-resolved quasiparticle weights and static self-energies for the Hubbard model even in the presence of noise levels representative of current NISQ processors. This paves the way to a controlled solution of the Hubbard model with larger and larger embedded problems solved by quantum computers.
We propose a method for computing space-resolved correlation properties of the two-dimensional Hubbard model within a quantum-classical embedding strategy that uses a noisy, intermediate scale quantum (NISQ) computer to solve the embedded model. While previous approaches were limited to purely local, one-impurity embedded models, requiring at most four qubits and relatively shallow circuits, we solve a two-impurity model requiring eight qubits with an advanced hybrid scheme on top of the variational quantum eigensolver algorithm. This iterative scheme, dubbed natural orbitalization (NOization), gradually transforms the single-particle basis to the approximate natural-orbital basis, in which the ground state can be minimally expressed, at the cost of measuring the one-particle reduced density matrix of the embedded problem. We show that this transformation tends to make the variational optimization of existing (but too deep) Ansatz circuits faster and more accurate, and we propose an Ansatz, the multireference excitation-preserving (MREP) Ansatz, that achieves great expressivity without requiring a prohibitive gate count, thus bridging the gap between hardware-efficient and physically motivated strategies in variational Ansatz design. The one-impurity version of the Ansatz has only one parameter, making the ground-state preparation a trivial step, which supports the optimal character of our approach. Within a rotationally invariant slave boson embedding scheme that requires a minimal number of bath sites and does not require computing the full Green's function, the NOization combined with the MREP Ansatz allow us to compute accurate, space-resolved quasiparticle weights and static self-energies for the Hubbard model even in the presence of noise levels representative of current NISQ processors. This paves the way to a controlled solution of the Hubbard model with larger and larger embedded problems solved by quantum computers.
We propose a method for computing space-resolved correlation properties of the two-dimensional Hubbard model within a quantum-classical embedding strategy that uses a Noisy, Intermediate Scale Quantum (NISQ) computer to solve the embedded model. While previous approaches were limited to purely local, one-impurity embedded models, requiring at most four qubits and relatively shallow circuits, we solve a two-impurity model requiring eight qubits with an advanced hybrid scheme on top of the Variational Quantum Eigensolver algorithm. This iterative scheme, dubbed Natural Orbitalization (NOization), gradually transforms the single-particle basis to the approximate Natural-Orbital basis, in which the ground state can be minimally expressed, at the cost of measuring the one-particle reduced density-matrix of the embedded problem. We show that this transformation tends to make the variational optimization of existing (but too deep) ansatz circuits faster and more accurate, and we propose an ansatz, the Multi-Reference Excitation Preserving (MREP) ansatz, that achieves great expressivity without requiring a prohibitive gate count. The one-impurity version of the ansatz has only one parameter, making the ground state preparation a trivial step, which supports the optimal character of our approach. Within a Rotationally Invariant Slave Boson embedding scheme that requires a minimal number of bath sites and does not require computing the full Green's function, the NOization combined with the MREP ansatz allow us to compute accurate, space-resolved quasiparticle weights and static self-energies for the Hubbard model even in the presence of noise levels representative of current NISQ processors. This paves the way to a controlled solution of the Hubbard model with larger and larger embedded problems solved by quantum computers.
Calculating the ground state properties of a Hamiltonian can be mapped to the problem of finding the ground state of a smaller Hamiltonian through the use of embedding methods. These embedding techniques have the ability to drastically reduce the problem size, and hence the number of qubits required when running on a quantum computer. However, the embedding process can produce a relatively complicated Hamiltonian, leading to a more complex quantum algorithm. In this paper we carry out a detailed study into how density matrix embedding theory (DMET) could be implemented on a quantum computer to solve the Hubbard model. We consider the variational quantum eigensolver (VQE) as the solver for the embedded Hamiltonian within the DMET algorithm. We derive the exact form of the embedded Hamiltonian and use it to construct efficient ansatz circuits and measurement schemes. We conduct detailed numerical simulations up to 16 qubits, the largest to date, for a range of Hubbard model parameters and find that the combination of DMET and VQE is effective for reproducing ground state properties of the model.
Simulating the Hubbard model is of great interest to a wide range of applications within condensed matter physics, however its solution on classical computers remains challenging in dimensions larger than one. The relative simplicity of this model, embodied by the sparseness of the Hamiltonian matrix, allows for its efficient implementation on quantum computers, and for its approximate solution using variational algorithms such as the variational quantum eigensolver. While these algorithms have been shown to reproduce the qualitative features of the Hubbard model, their quantitative accuracy in terms of producing true ground state energies and other properties, and the dependence of this accuracy on the system size and interaction strength, the choice of variational ansatz, and the degree of spatial inhomogeneity in the model, remains unknown. Here we present a rigorous classical benchmarking study, demonstrating the potential impact of these factors on the accuracy of the variational solution of the Hubbard model on quantum hardware, for systems with up to 32 qubits. We find that even when using the most accurate wavefunction ansätze for the Hubbard model, the error in its ground state energy and wavefunction plateaus for larger lattices, while stronger electronic correlations magnify this issue. Concurrently, spatially inhomogeneous parameters and the presence of off-site Coulomb interactions only have a small effect on the accuracy of the computed ground state energies. Our study highlights the capabilities and limitations of current approaches for solving the Hubbard model on quantum hardware, and we discuss potential future avenues of research.
Simulation of electronic structure is one of the most promising applications on noisy intermediate-scale quantum (NISQ) era devices. However, NISQ devices suffer from a number of challenges like limited qubit connectivity, short coherence times, and sizable gate error rates. Thus, desired quantum algorithms should require shallow circuit depths and low qubit counts to take advantage of these devices. Here, we attempt to reduce quantum resource requirements for molecular simulations on a quantum computer while maintaining the desired accuracy with the help of classical quantum chemical theories of canonical transformation and explicit correlation. In this work, compact ab initio Hamiltonians are generated classically, in the second quantized form, through an approximate similarity transformation of the Hamiltonian with (a) an explicitly correlated two-body unitary operator with generalized pair excitations that remove the Coulombic electron-electron singularities from the Hamiltonian and (b) a unitary one-body operator to efficiently capture the orbital relaxation effects required for accurate description of the excited states. The resulting transcorrelated Hamiltonians are able to describe both the ground and the excited states of molecular systems in a balanced manner. Using the variational quantum eigensolver (VQE) method based on the unitary coupled cluster with singles and doubles (UCCSD) ansatz and only a minimal basis set (ANO-RCC-MB), we demonstrate that the transcorrelated Hamiltonians can produce ground state energies comparable to the reference CCSD energies with the much larger cc-pVTZ basis set. This leads to a reduction in the number of required CNOT gates by more than 3 orders of magnitude for the chemical species studied in this work. Furthermore, using the quantum equation of motion (qEOM) formalism in conjunction with the transcorrelated Hamiltonian, we are able to reduce the deviations in the excitation energies from the reference EOM-CCSD/cc-pVTZ values by an order of magnitude. The transcorrelated Hamiltonians developed here are Hermitian and contain only one- and two-body interaction terms and thus can be easily combined with any quantum algorithm for accurate electronic structure simulations.
Some of the computational limitations in solving the nuclear many-body problem could be overcome by utilizing quantum computers. The nuclear shell-model calculations providing deeper insights into the properties of atomic nuclei, is one such case with high demand for resources as the size of the Hilbert space grows exponentially with the number of particles involved. Quantum algorithms are being developed to overcome these challenges and advance such calculations. To develop quantum circuits for the nuclear shell-model, leveraging the capabilities of noisy intermediate-scale quantum (NISQ) devices. We aim to minimize resource requirements (specifically in terms of qubits and gates) and strive to reduce the impact of noise by employing relevant mitigation techniques. We achieve noise resilience by designing an optimized ansatz for the variational quantum eigensolver (VQE) based on Givens rotations and incorporating qubit-ADAPT-VQE in combination with variational quantum deflation (VQD) to compute ground and excited states incorporating the zero-noise extrapolation mitigation technique. Furthermore, the qubit requirements are significantly reduced by mapping the basis states to qubits using Gray code encoding and generalizing transformations of fermionic operators to efficiently represent manybody states. By employing the noise-resilient protocols, we achieve the ground and excited state energy levels of 38Ar and 6Li with better accuracy. These energy levels are presented for noiseless simulations, noisy conditions, and after applying noise mitigation techniques. Results are compared for Jordan Wigner and Gray code encoding using VQE, qubit-ADAPT-VQE, and VQD. Our work highlights the potential of noise-resilient protocols to leverage the full potential of NISQ devices in scaling the nuclear shell model calculations.
The Variational Quantum Eigensolver (VQE), as a hybrid quantum-classical algorithm, is an important tool for effective quantum computing in the current noisy intermediate-scale quantum (NISQ) era. However, the traditional hardware-efficient ansatz without taking into account symmetries requires more computational resources to explore the unnecessary regions in the Hilbert space. The conventional Subspace-Search VQE (SSVQE) algorithm, which can calculate excited states, is also unable to effectively handle degenerate states since the loss function only contains the expectation value of the Hamiltonian. In this study, the energy eigenstates of the one-dimensional Fermi-Hubbard model with two lattice sites and the two-dimensional Hubbard model with four lattice sites are calculated. By incorporating symmetries into the quantum circuits and loss function, we find that both the ground state and excited state calculations are improved greatly compared to the case without symmetries. The enhancement in excited state calculations is particularly significant. This is because quantum circuits that conserve the particle number are used, and appropriate penalty terms are added to the loss function, enabling the optimization process to correctly identify degenerate states. The results are verified through repeated simulations.