Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2107.12504 · Scientific Reports

High-fidelity quantum information transmission using a room-temperature nonrefrigerated lossy microwave waveguide

Montasir Qasymeh, Hichem Eleuch

Published Sep 29, 2022• 4 citations
arXivHTMLPDF

Abstract

Quantum microwave transmission is key to realizing modular superconducting quantum computers and distributed quantum networks. A large number of incoherent photons are thermally generated within the microwave frequency spectrum. The closeness of the transmitted quantum state to the source-generated quantum state at the input of the transmission link (measured by the transmission fidelity) degrades due to the presence of the incoherent photons. Hence, high-fidelity quantum microwave transmission has long been considered to be infeasible without refrigeration. In this study, we propose a novel method for high-fidelity quantum microwave transmission using a room-temperature lossy waveguide. The proposed scheme consists of connecting two cryogenic nodes (i.e., a transmitter and a receiver) by the room-temperature lossy microwave waveguide. First, cryogenic preamplification is implemented prior to transmission. Second, at the receiver side, a cryogenic loop antenna is placed inside the output port of the waveguide and coupled to an LC harmonic oscillator located outside the waveguide. The loop antenna converts quantum microwave fields to a quantum voltage across the coupled LC harmonic oscillator. Noise photons are induced across the LC oscillator including the source generated noise, the preamplification noise, the thermal occupation of the waveguide, and the fluctuation-dissipation noise. The loop antenna detector at the receiver is designed to extensively suppress the induced photons across the LC oscillator. The signal transmittance is maintained intact by providing significant preamplification gain. Our calculations show that high-fidelity quantum transmission (i.e., more than [Formula: see text]) is realized based on the proposed scheme for transmission distances reaching 100 m.

DOI
10.1038/s41598-022-20733-3

Related papers

Coherent microwave transmission using a nonrefrigerated waveguide at room temperature

Montasir Qasymeh, Hichem Eleuch

Coherent quantum microwave transmission is key to realizing modular superconducting quantum computers and distributed quantum networks. However, a large number of incoherent photons are thermally generated in the microwave frequency spectrum. Hence, coherent transmission of microwave fields has long been believed to be infeasible without refrigeration. In this work, we propose a novel method for coherent microwave transmission using a typical microwave waveguide at room temperature. The proposed scheme considers two cryogenic nodes (i.e., a transmitter and a receiver) connected by a room-temperature microwave waveguide. At the receiver side, we implement a cryogenic loop antenna coupled to an LC harmonic oscillator inside the output port of the waveguide, while the LC harmonic oscillator is located outside the waveguide. The loop antenna converts the quantum microwave fields (which contain both signal and thermal noise photons) to a quantum voltage across the coupled LC harmonic oscillator. We show that by properly designing the loop antenna, the number of detected noise photons can be significantly less than one. Simultaneously, the detected signal photons can be maintained at a sufficient number greater than one by transmitting a proper number of photons at the input port of the waveguide. For example, we show that for a 10 GHz microwave signal, when using a room-temperature transmission waveguide of 5m length, 35 coherent photons are detected across the LC circuit by transmitting 32x10^4 signal photons at the input port of the waveguide. Interestingly, the number of detected noise photons is maintained as small as 6.3x10^-3. The microwave transmission scheme proposed in this work paves the way towards realizing practical modular quantum computers with a simple architecture.

•Jul 26, 2021•0 citations

Cryogenic microwave source based on nanoscale tunnel junctions

Shumpei Masuda, Kuan Yen Tan, Matti Partanen +5 more

We experimentally realize an incoherent microwave source driven by voltage-controlled quantum tunneling of electrons through nanoscale normal-metal--insulator--superconductor junctions coupled to a resonator. We observe the direct conversion of the electronic energy into microwave photons by measuring the power spectrum of the microwave radiation emitted from the resonator. The demonstrated total output power exceeds that of 2.5-K thermal radiation although the photon and electron reservoirs are at subkelvin temperatures. Measurements of the output power quantitatively agree with a theoretical model in a wide range of the bias voltages providing information on the electrically-controlled photon creation. The developed photon source is fully compatible with low-temperature electronics and offers convenient in-situ electrical control of the photon emission rate with a predetermined frequency, without relying on intrinsic voltage fluctuations of heated normal-metal components nor suffering from unwanted dissipation in room temperature cables. In addition to its potential applications in microwave photonics, our results provide complementary verification of the working principles of the recently discovered quantum-circuit refrigerator.

arXiv:1612.06822•Dec 20, 2016•2 citations

Coherent conversion between optical and microwave photons in Rydberg gases

Martin Kiffner, Amir Feizpour, K. T. Kaczmarek +2 more

Quantum information encoded in optical photons can be transmitted over long distances with very high information density, and suffers from negligible thermal noise at room temperature. On the other hand, microwave photons at cryogenic temperatures can be confined in high quality resonators and strongly coupled to solid-state qubits, providing a quantum bus to connect qubits and a route to deterministic photonic non-linearities. The coherent interconversion of microwave and optical photons has therefore recently emerged as a highly desirable capability that would enable freely-scalable networks of optically-linked qubits, or large-scale photonic information processing with multi-photon interactions mediated by microwaves. Here, we propose a route to efficient and coherent microwave-optical conversion based on frequency mixing in Rydberg atoms. The interaction requires no microfabricated components or cavities, and is tunable, broadband, and both spatially and spectrally multimode.

•Jan 26, 2016•2 citations

Study of Scalable Thermally Insulated Transmission Line for Superconducting Quantum Computers

Maria Fuwa, Tomonori Arakawa, Noriyoshi Hashimoto +4 more

Since superconducting quantum computers use microwave signals to control and readout their qubits, microwave transmission lines and circuits that can be used under cryogenic conditions are required. For microwave transmission lines, thermal insulation is essential to enhance wiring density and to prevent parasitic heating that can lead to increased computational errors. Thus, here we design and characterize a scalable, thermally insulated microwave transmission line. The transmission line designed for superconducting qubit readout at 5 GHz band achieves both thermal insulation and low loss, by employing resonator-based impedance matching in a microstripline structure. A flexible cable including eight planar transmission lines was designed, fabricated and characterized using S-parameter measurement, demonstrating low crosstalk below 40dB and signal attenuation of -23.5±0.07dB; this coincides with electromagnetic simulations. These microwave properties remained stable across a wide temperature range from room temperature down to 4 K, including steep gradients. The integration of chip attenuators further reduces thermal noise and protects sensitive cryogenic components. Our approach offers a promising solution for compact, high-density microwave wiring using flat cables under thermal gradients, necessary for large scale quantum computing.

IEICE Transactions on Electronics•Apr 16, 2026•0 citations

Cryogenic microwave link for quantum local area networks

W. K. Yam, Michael Renger, S. Gandorfer +16 more

Scalable quantum information processing with superconducting circuits is expected to advance from individual processors located in single dilution refrigerators to more powerful distributed quantum computing systems. The realization of hardware platforms for quantum local area networks (QLANs) compatible with superconducting technology is of high importance in order to achieve a practical quantum advantage. Here, we present a fundamental prototype platform for a microwave QLAN based on a cryogenic link connecting two separate dilution cryostats over a distance of 6.6 m with a base temperature of 52 mK in the center. Superconducting microwave coaxial cables are employed to form a quantum communication channel between the distributed network nodes. We demonstrate the continuous-variable entanglement distribution between the remote dilution refrigerators in the form of two-mode squeezed microwave states, reaching squeezing of 2.10 ± 0.02 dB and negativity of 0.501 ± 0.011. Furthermore, we show that quantum entanglement is preserved at channel center temperatures up to 1 K, paving the way towards microwave quantum communication at elevated temperatures. Consequently, such a QLAN system can form the backbone for future distributed quantum computing with superconducting circuits.

arXiv:2308.12398•npj Quantum Information•May 31, 2025•15 citations

A Modular Cryogenic Link for Microwave Quantum Communication Over Distances of Tens of Meters

Josua D. Schär, Simon Storz, Paul Magnard +6 more

Quantum technologies promise a radically new way to solve classically intractable computing problems. Superconducting circuits as a platform are at the forefront of this field. The cryogenic operation temperatures of superconducting circuits however impose challenges for the further scaling to many connected quantum information processing units into a local area or global network. In this work, we present a hardware solution for connecting quantum devices operating at microwave frequencies into local area networks, which enable the exchange of quantum information between spatially separated parties. Specifically, we demonstrate a modular system spanning distances of 5, 10 and 30 meters operated at cryogenic temperatures and connecting two superconducting circuit systems, located in individual dilution refrigerators, through a quantum communication channel. We develop a thermal model to evaluate the heat transfer processes in the setup, optimize the design and select appropriate materials for its construction. The assembled 30-meter-long system achieves operating temperatures of below 50 mK after a cooldown time of about six and a half days. This link enables the execution of distributed quantum computing and communication algorithms. It also adds the resource of non-locality, certified by a loophole-free Bell test, to the field of quantum science and technology with superconducting circuits.

quant-pharXiv:2604.15971•Physical Review Applied•Apr 20, 2026•0 citations
Quantum microwave transmission is key to realizing modular superconducting quantum computers and distributed quantum networks. A large number of incoherent photons are thermally generated within the microwave frequency spectrum. The closeness of the transmitted quantum state to the source-generated quantum state at the input of the transmission link (measured by the transmission fidelity) degrades due to the presence of the incoherent photons. Hence, high-fidelity quantum microwave transmission has long been considered to be infeasible without refrigeration. In this study, we propose a novel method for high-fidelity quantum microwave transmission using a room-temperature lossy waveguide. The proposed scheme consists of connecting two cryogenic nodes (i.e., a transmitter and a receiver) by the room-temperature lossy microwave waveguide. First, cryogenic preamplification is implemented prior to transmission. Second, at the receiver side, a cryogenic loop antenna is placed inside the output port of the waveguide and coupled to an LC harmonic oscillator located outside the waveguide. The loop antenna converts quantum microwave fields to a quantum voltage across the coupled LC harmonic oscillator. Noise photons are induced across the LC oscillator including the source generated noise, the preamplification noise, the thermal occupation of the waveguide, and the fluctuation-dissipation noise. The loop antenna detector at the receiver is designed to extensively suppress the induced photons across the LC oscillator. The signal transmittance is maintained intact by providing significant preamplification gain. Our calculations show that high-fidelity quantum transmission (i.e., more than [Formula: see text]) is realized based on the proposed scheme for transmission distances reaching 100 m.
Coherent quantum microwave transmission is key to realizing modular superconducting quantum computers and distributed quantum networks. However, a large number of incoherent photons are thermally generated in the microwave frequency spectrum. Hence, coherent transmission of microwave fields has long been believed to be infeasible without refrigeration. In this work, we propose a novel method for coherent microwave transmission using a typical microwave waveguide at room temperature. The proposed scheme considers two cryogenic nodes (i.e., a transmitter and a receiver) connected by a room-temperature microwave waveguide. At the receiver side, we implement a cryogenic loop antenna coupled to an LC harmonic oscillator inside the output port of the waveguide, while the LC harmonic oscillator is located outside the waveguide. The loop antenna converts the quantum microwave fields (which contain both signal and thermal noise photons) to a quantum voltage across the coupled LC harmonic oscillator. We show that by properly designing the loop antenna, the number of detected noise photons can be significantly less than one. Simultaneously, the detected signal photons can be maintained at a sufficient number greater than one by transmitting a proper number of photons at the input port of the waveguide. For example, we show that for a 10 GHz microwave signal, when using a room-temperature transmission waveguide of 5m length, 35 coherent photons are detected across the LC circuit by transmitting 32x10^4 signal photons at the input port of the waveguide. Interestingly, the number of detected noise photons is maintained as small as 6.3x10^-3. The microwave transmission scheme proposed in this work paves the way towards realizing practical modular quantum computers with a simple architecture.
We experimentally realize an incoherent microwave source driven by voltage-controlled quantum tunneling of electrons through nanoscale normal-metal--insulator--superconductor junctions coupled to a resonator. We observe the direct conversion of the electronic energy into microwave photons by measuring the power spectrum of the microwave radiation emitted from the resonator. The demonstrated total output power exceeds that of 2.5-K thermal radiation although the photon and electron reservoirs are at subkelvin temperatures. Measurements of the output power quantitatively agree with a theoretical model in a wide range of the bias voltages providing information on the electrically-controlled photon creation. The developed photon source is fully compatible with low-temperature electronics and offers convenient in-situ electrical control of the photon emission rate with a predetermined frequency, without relying on intrinsic voltage fluctuations of heated normal-metal components nor suffering from unwanted dissipation in room temperature cables. In addition to its potential applications in microwave photonics, our results provide complementary verification of the working principles of the recently discovered quantum-circuit refrigerator.
Quantum information encoded in optical photons can be transmitted over long distances with very high information density, and suffers from negligible thermal noise at room temperature. On the other hand, microwave photons at cryogenic temperatures can be confined in high quality resonators and strongly coupled to solid-state qubits, providing a quantum bus to connect qubits and a route to deterministic photonic non-linearities. The coherent interconversion of microwave and optical photons has therefore recently emerged as a highly desirable capability that would enable freely-scalable networks of optically-linked qubits, or large-scale photonic information processing with multi-photon interactions mediated by microwaves. Here, we propose a route to efficient and coherent microwave-optical conversion based on frequency mixing in Rydberg atoms. The interaction requires no microfabricated components or cavities, and is tunable, broadband, and both spatially and spectrally multimode.
Since superconducting quantum computers use microwave signals to control and readout their qubits, microwave transmission lines and circuits that can be used under cryogenic conditions are required. For microwave transmission lines, thermal insulation is essential to enhance wiring density and to prevent parasitic heating that can lead to increased computational errors. Thus, here we design and characterize a scalable, thermally insulated microwave transmission line. The transmission line designed for superconducting qubit readout at 5 GHz band achieves both thermal insulation and low loss, by employing resonator-based impedance matching in a microstripline structure. A flexible cable including eight planar transmission lines was designed, fabricated and characterized using S-parameter measurement, demonstrating low crosstalk below 40dB and signal attenuation of -23.5±0.07dB; this coincides with electromagnetic simulations. These microwave properties remained stable across a wide temperature range from room temperature down to 4 K, including steep gradients. The integration of chip attenuators further reduces thermal noise and protects sensitive cryogenic components. Our approach offers a promising solution for compact, high-density microwave wiring using flat cables under thermal gradients, necessary for large scale quantum computing.
Scalable quantum information processing with superconducting circuits is expected to advance from individual processors located in single dilution refrigerators to more powerful distributed quantum computing systems. The realization of hardware platforms for quantum local area networks (QLANs) compatible with superconducting technology is of high importance in order to achieve a practical quantum advantage. Here, we present a fundamental prototype platform for a microwave QLAN based on a cryogenic link connecting two separate dilution cryostats over a distance of 6.6 m with a base temperature of 52 mK in the center. Superconducting microwave coaxial cables are employed to form a quantum communication channel between the distributed network nodes. We demonstrate the continuous-variable entanglement distribution between the remote dilution refrigerators in the form of two-mode squeezed microwave states, reaching squeezing of 2.10 ± 0.02 dB and negativity of 0.501 ± 0.011. Furthermore, we show that quantum entanglement is preserved at channel center temperatures up to 1 K, paving the way towards microwave quantum communication at elevated temperatures. Consequently, such a QLAN system can form the backbone for future distributed quantum computing with superconducting circuits.
Quantum technologies promise a radically new way to solve classically intractable computing problems. Superconducting circuits as a platform are at the forefront of this field. The cryogenic operation temperatures of superconducting circuits however impose challenges for the further scaling to many connected quantum information processing units into a local area or global network. In this work, we present a hardware solution for connecting quantum devices operating at microwave frequencies into local area networks, which enable the exchange of quantum information between spatially separated parties. Specifically, we demonstrate a modular system spanning distances of 5, 10 and 30 meters operated at cryogenic temperatures and connecting two superconducting circuit systems, located in individual dilution refrigerators, through a quantum communication channel. We develop a thermal model to evaluate the heat transfer processes in the setup, optimize the design and select appropriate materials for its construction. The assembled 30-meter-long system achieves operating temperatures of below 50 mK after a cooldown time of about six and a half days. This link enables the execution of distributed quantum computing and communication algorithms. It also adds the resource of non-locality, certified by a loophole-free Bell test, to the field of quantum science and technology with superconducting circuits.