Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2107.07466 · IEEE International Symposium on Information Theory (ISIT)

Trade-Based LDPC Codes

Farzane Amirzade, Daniel Panario, Mohammad‐Reza Sadeghi

Published Jun 26, 2022• 4 citations
arXivHTMLPDF

Abstract

LDPC codes based on multi-edge protographs potentially have larger minimum distances compared to their counterparts, single-edge protographs. However, considering different features of their Tanner graph, such as short cycles, girth and other graphical structures, is harder than for Tanner graphs from single-edge protographs. Here, we provide a novel approach to construct the parity-check matrix of an LDPC code which is based on trades obtained from block designs. We employ our method to construct multi-edge quasi-cyclic (QC) LDPC codes.We use those trade-based matrices to define base matrices of multi-edge protographs. The construction of exponent matrices corresponding to these base matrices has less complexity than the ones proposed in the literature. We prove that these base matrices result in QC-LDPC codes with smaller lower bounds on the lifting degree than existing ones.

DOI
10.1109/isit50566.2022.9834826

Related papers

1Design of Multiple-Edge Protographs for QC LDPC Codes Avoiding Short Inevitable Cycles

Hosung Park Seokbeom Hong

There have been lots of efforts on the construction of quasi-cyclic (QC) low-density parity-check (LDPC) codes with large girth. However, most of them are focused on protographs with single edges and little research has been done for the construction of QC LDPC codes lifted from protographs with multiple edges. Compared to single-edge protographs, multiple-edge protographs have benefits such that QC LDPC codes lifted from them can potentially have larger minimum Hamming distance. In this paper, all subgraph patterns of multiple-edge protographs, which prevent QC LDPC codes from having large girth by inducing inevitable cycles, are fully investigated based on graph-theoretic approach. By using combinatorial designs, a systematic construction method of multiple-edge protographs is proposed for regular QC LDPC codes with girth at least 12 and also other method is proposed for regular QC LDPC codes with girth at least 14. A construction algorithm of QC LDPC codes by lifting multiple-edge protographs is proposed and it is shown that the resulting QC LDPC codes have larger upper bounds on the minimum Hamming distance than those lifted from single-edge protographs. Simulation results are provided to compare the performance of the proposed QC LDPC codes, the progressive edge-growth (PEG) LDPC codes, and the PEG QC LDPC codes.

•Jan 1, 2014•26 citations

On the Construction of Multitype Quasi-Cyclic Low-Density Parity-Check Codes With Different Girth and Length

Farzaneh Abedi, Mohammad Gholami

Multitype quasi-cyclic (QC) low-density parity-check (LDPC) codes are a class of protograph LDPC codes lifted cyclically from protographs with multiple edges, represented by two weight and slope matrices. For a given weight-matrix, an approach is proposed to find the maximum-achievable girth$g_{\max }$of the corresponding multitype QC-LDPC codes by some inevitable chains having less complexity than the existing methods. This advantage leads to some new patterns of the weight matrices such that the corresponding codes have some improvements in terms of the maximum-achievable girths or the minimum-distance upper-bounds. In continue, for a given weight-matrix with maximum-achievable girth$g_{\max }$, some slope-matrices are constructed by a depth-first search algorithm for which the corresponding multitype QC-LDPC codes with even girth$g$,$g\le g_{\max }$, have smaller lengths, higher rates, or larger minimum-distances than the state-of-the-art achievements. Simulation results show that the constructed codes have some error-rate advantages than PEG, random-like, CCSDS, and 802.11n/ac IEEE standard LDPC codes.

IEEE Access•Jan 1, 2021•2 citations

Analytical Lower Bound on the Lifting Degree of Multiple-Edge QC-LDPC Codes With Girth 6

Mohammad‐Reza Sadeghi, Farzane Amirzade

Multiple-edge protographs have some advantages over single-edge protographs, such as potentially having larger minimum Hamming distance. However, most of results in the literature are related to the construction of single-edge quasi-cyclic low-density parity-check codes (QC-LDPC) codes and little research has been done for the construction of multiple-edge QC-LDPC codes. In this letter, for the first time, necessary and sufficient conditions for the exponent matrices to have multiple-edge QC-LDPC codes with girth 6 are provided. As a consequence of this letter, a lower bound on the lifting degree of regular and irregular multiple-edge QC-LDPC codes with girth 6 is derived. We also present QC-LDPC codes whose lifting degrees meet our proposed lower bound. These codes have shorter lengths compared with single-edge QC-LDPC codes. Another contribution of this letter is presenting a technique to reduce the size of the search space to find these codes.

IEEE Communications Letters•May 29, 2018•24 citations

Quasi-Cyclic Low-Density Parity-Check Codes Based on Progressive Cycle Growth Algorithm

Yuanhua Liu, Meiling Zhang, Niu Xin-Liang

Short cycles in the Tanner graph of a given LDPC code has negative effect on the performance of iterative decoding. To improve the performance, we presented an approach for constructing Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes whose associated Tanner graph has large girth and a small amount of short cycles. Each column block of the parity check matrix was designed by adding circulant permutation sub-matrices one after another, provided the current parity check matrix has minimal number of short cycles. The condition for the proposed QC-LDPC codes to have girth at least 6 was also analyzed. Regular and irregular QC-LDPC codes with various lengths and rates can be constructed. Simulations show that the proposed QC-LDPC codes have less short cycles and better performance than existing progressive edge growth based QC-LDPC codes.

International Conference on Instrumentation and Measurement, Computer, Communication and Control (IMCCC)•Jul 1, 2016•1 citation

A Unifying Framework to Construct QC-LDPC Tanner Graphs of Desired Girth

Roxana Smarandache, David G. M. Mitchell

This paper presents a unifying framework to construct low-density parity-check (LDPC) codes with associated Tanner graphs of desired girth. Towards this goal, we highlight the role that a certain square matrix that appears in the product of the parity-check matrix with its transpose has in the construction of codes with graphs of desired girth and further explore it in order to generate the set of necessary and sufficient conditions for a Tanner graph to have a given girth between 6 and 12. For each such girth, we present algorithms to construct codes of the desired girth and we show how to use them to compute the minimum necessary value of the lifting factor. For girth larger than 12, we show how to use multi-step graph lifting methods to deterministically modify codes in order to increase their girth. We also give a new perspective on LDPC protograph-based parity-check matrices by viewing them as rows of a parity-check matrix equal to the sum of certain permutation matrices and obtain an important connection between all protographs and those with variable nodes of degree 2. We also show that the results and methodology that we develop for the all-one protograph can be used and adapted to analyze the girth of the Tanner graph of any parity-check matrix and demonstrate how this can be done using a well-known irregular, multi-edge protograph specified by the NASA Consultative Committee for Space Data Systems (CCSDS). Throughout the paper, we exemplify our theoretical results with constructions of LDPC codes with Tanner graphs of any girth between 6 and 14 and give sufficient conditions for a multi-step lifted parity-check matrix to have girth between 14 and 22.

arXiv:2108.01637•IEEE Transactions on Information Theory•Apr 25, 2022•17 citations

Quasi-Cyclic Protograph-Based Raptor-Like LDPC Codes With Girth 6 and Shortest Length

Farzane Amirzade, Mohammad‐Reza Sadeghi, Daniel Panario

We consider multiple-edge QC-LDPC codes with a base matrix of large size. We propose a new method, the degree reduction method, to obtain exponent matrices of these codes which considerably reduces the complexity of the search algorithm. We also provide a necessary and sufficient condition to avoid 4-cycles from occurrence in the Tanner graph of codes obtained using our method. Then, we apply our method to quasi-cyclic protograph-based Raptor-Like LDPC (QC-PBRL-LDPC) codes whose base matrices are multiple-edge. Numerical results show that as a consequence of this study we can obtain the minimum lifting degree of QC-PBRL-LDPC codes with girth at least 6. Thus, the lengths of the obtained codes are much smaller than those of their counterpart short-length codes in the literature.

IEEE International Symposium on Information Theory (ISIT)•Jul 12, 2021•6 citations
LDPC codes based on multi-edge protographs potentially have larger minimum distances compared to their counterparts, single-edge protographs. However, considering different features of their Tanner graph, such as short cycles, girth and other graphical structures, is harder than for Tanner graphs from single-edge protographs. Here, we provide a novel approach to construct the parity-check matrix of an LDPC code which is based on trades obtained from block designs. We employ our method to construct multi-edge quasi-cyclic (QC) LDPC codes.We use those trade-based matrices to define base matrices of multi-edge protographs. The construction of exponent matrices corresponding to these base matrices has less complexity than the ones proposed in the literature. We prove that these base matrices result in QC-LDPC codes with smaller lower bounds on the lifting degree than existing ones.
There have been lots of efforts on the construction of quasi-cyclic (QC) low-density parity-check (LDPC) codes with large girth. However, most of them are focused on protographs with single edges and little research has been done for the construction of QC LDPC codes lifted from protographs with multiple edges. Compared to single-edge protographs, multiple-edge protographs have benefits such that QC LDPC codes lifted from them can potentially have larger minimum Hamming distance. In this paper, all subgraph patterns of multiple-edge protographs, which prevent QC LDPC codes from having large girth by inducing inevitable cycles, are fully investigated based on graph-theoretic approach. By using combinatorial designs, a systematic construction method of multiple-edge protographs is proposed for regular QC LDPC codes with girth at least 12 and also other method is proposed for regular QC LDPC codes with girth at least 14. A construction algorithm of QC LDPC codes by lifting multiple-edge protographs is proposed and it is shown that the resulting QC LDPC codes have larger upper bounds on the minimum Hamming distance than those lifted from single-edge protographs. Simulation results are provided to compare the performance of the proposed QC LDPC codes, the progressive edge-growth (PEG) LDPC codes, and the PEG QC LDPC codes.
Multitype quasi-cyclic (QC) low-density parity-check (LDPC) codes are a class of protograph LDPC codes lifted cyclically from protographs with multiple edges, represented by two weight and slope matrices. For a given weight-matrix, an approach is proposed to find the maximum-achievable girthgmax⁡g_{\max }gmax​of the corresponding multitype QC-LDPC codes by some inevitable chains having less complexity than the existing methods. This advantage leads to some new patterns of the weight matrices such that the corresponding codes have some improvements in terms of the maximum-achievable girths or the minimum-distance upper-bounds. In continue, for a given weight-matrix with maximum-achievable girthgmax⁡g_{\max }gmax​, some slope-matrices are constructed by a depth-first search algorithm for which the corresponding multitype QC-LDPC codes with even girthggg,g≤gmax⁡g\le g_{\max }g≤gmax​, have smaller lengths, higher rates, or larger minimum-distances than the state-of-the-art achievements. Simulation results show that the constructed codes have some error-rate advantages than PEG, random-like, CCSDS, and 802.11n/ac IEEE standard LDPC codes.
Multiple-edge protographs have some advantages over single-edge protographs, such as potentially having larger minimum Hamming distance. However, most of results in the literature are related to the construction of single-edge quasi-cyclic low-density parity-check codes (QC-LDPC) codes and little research has been done for the construction of multiple-edge QC-LDPC codes. In this letter, for the first time, necessary and sufficient conditions for the exponent matrices to have multiple-edge QC-LDPC codes with girth 6 are provided. As a consequence of this letter, a lower bound on the lifting degree of regular and irregular multiple-edge QC-LDPC codes with girth 6 is derived. We also present QC-LDPC codes whose lifting degrees meet our proposed lower bound. These codes have shorter lengths compared with single-edge QC-LDPC codes. Another contribution of this letter is presenting a technique to reduce the size of the search space to find these codes.
Short cycles in the Tanner graph of a given LDPC code has negative effect on the performance of iterative decoding. To improve the performance, we presented an approach for constructing Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes whose associated Tanner graph has large girth and a small amount of short cycles. Each column block of the parity check matrix was designed by adding circulant permutation sub-matrices one after another, provided the current parity check matrix has minimal number of short cycles. The condition for the proposed QC-LDPC codes to have girth at least 6 was also analyzed. Regular and irregular QC-LDPC codes with various lengths and rates can be constructed. Simulations show that the proposed QC-LDPC codes have less short cycles and better performance than existing progressive edge growth based QC-LDPC codes.
This paper presents a unifying framework to construct low-density parity-check (LDPC) codes with associated Tanner graphs of desired girth. Towards this goal, we highlight the role that a certain square matrix that appears in the product of the parity-check matrix with its transpose has in the construction of codes with graphs of desired girth and further explore it in order to generate the set of necessary and sufficient conditions for a Tanner graph to have a given girth between 6 and 12. For each such girth, we present algorithms to construct codes of the desired girth and we show how to use them to compute the minimum necessary value of the lifting factor. For girth larger than 12, we show how to use multi-step graph lifting methods to deterministically modify codes in order to increase their girth. We also give a new perspective on LDPC protograph-based parity-check matrices by viewing them as rows of a parity-check matrix equal to the sum of certain permutation matrices and obtain an important connection between all protographs and those with variable nodes of degree 2. We also show that the results and methodology that we develop for the all-one protograph can be used and adapted to analyze the girth of the Tanner graph of any parity-check matrix and demonstrate how this can be done using a well-known irregular, multi-edge protograph specified by the NASA Consultative Committee for Space Data Systems (CCSDS). Throughout the paper, we exemplify our theoretical results with constructions of LDPC codes with Tanner graphs of any girth between 6 and 14 and give sufficient conditions for a multi-step lifted parity-check matrix to have girth between 14 and 22.
We consider multiple-edge QC-LDPC codes with a base matrix of large size. We propose a new method, the degree reduction method, to obtain exponent matrices of these codes which considerably reduces the complexity of the search algorithm. We also provide a necessary and sufficient condition to avoid 4-cycles from occurrence in the Tanner graph of codes obtained using our method. Then, we apply our method to quasi-cyclic protograph-based Raptor-Like LDPC (QC-PBRL-LDPC) codes whose base matrices are multiple-edge. Numerical results show that as a consequence of this study we can obtain the minimum lifting degree of QC-PBRL-LDPC codes with girth at least 6. Thus, the lengths of the obtained codes are much smaller than those of their counterpart short-length codes in the literature.