Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2106.07530 · Physical Review Research

Universal hardware-efficient topological measurement-based quantum computation via color-code-based cluster states

Seok-Hyung Lee, Hyunseok Jeong

Published Jan 4, 2022• 9 citations
arXivHTMLPDF

Abstract

Topological measurement-based quantum computation (MBQC) enables one to carry out universal fault-tolerant quantum computation via single-qubit measurements with a family of large entangled states called cluster states as resources. Raussendorf's three-dimensional cluster states (RTCSs) based on the surface codes are mainly considered for topological MBQC. In such schemes, however, the logical Hadamard, phase $({Z}^{1/2})$, and $T$ $({Z}^{1/4})$ gates which are essential for building up arbitrary logical gates are not implemented natively without using state distillation or lattice dislocations, to the best of our knowledge. In particular, state distillation generally consumes many ancillary logical qubits; thus it is a severe obstacle against practical quantum computing. To solve this problem, we suggest an MBQC scheme via a family of cluster states called color-code-based cluster states (CCCSs) based on the two-dimensional color codes instead of the surface codes. We define logical qubits, construct elementary logical gates, and describe error correction schemes. We show that all logical Clifford gates generated by the cnot, Hadamard, and phase gates can be implemented natively in a fault-tolerant manner, although the $T$ gate still requires state distillation to be fault-tolerant. The error thresholds of MBQC via CCCSs for logical-$Z$ errors are calculated to be 2.7%--2.8%, which are comparable to the values for RTCSs, assuming a simple error model where physical qubits have nontrivial errors independently with the same probability. We analyze and compare the resource overheads of both the schemes. In particular, we show that the number of physical qubits required for implementing a phase gate with CCCSs is at least about 26 times smaller than with RTCSs using state distillation, for the same code distance.

DOI
10.1103/physrevresearch.4.013010

Related papers

Hyperbolic Cluster States for Fault-Tolerant Measurement-Based Quantum Computing

Ahmed Adel Mahmoud, Gabrielle Tournaire, Sven Bachmann +1 more

Fault-tolerant measurement-based quantum computing (MBQC) provides a compelling framework for fault-tolerant quantum computation, in which quantum information is processed through single-qubit measurements on a three-dimensional entangled resource known as cluster state. To date, this resource has been predominantly studied on Euclidean lattices, most notably in the Raussendorf-Harrington-Goyal (RHG) construction, which underlies topological fault tolerance in MBQC. In this work, we introduce the hyperbolic cluster state, a generalization of the three-dimensional cluster state to negatively curved geometries, obtained via the foliation of periodic hyperbolic lattices. We present an explicit construction of hyperbolic cluster states and investigate their fault-tolerant properties under a realistic circuit-level depolarizing noise model. Using large-scale numerical simulations, we perform memory experiments to characterize their logical error rates and decoding performance. Our results demonstrate that hyperbolic cluster states exhibit a fault-tolerance threshold comparable to that of the Euclidean RHG cluster state, while simultaneously supporting a constant encoding rate in the thermodynamic limit. This represents a substantial improvement in qubit overhead relative to conventional cluster-state constructions. These findings establish hyperbolic geometry as a powerful and experimentally relevant resource for scalable, fault-tolerant MBQC and open new avenues for leveraging negative curvature in quantum information processing.

quant-pharXiv:2603.27004•Mar 31, 2026•0 citations

Fault-tolerant topological cluster state quantum computing

Austin G. Fowler, Kovid Goyal

Introduction Cluster states were introduced in Chapter 18, along with some of the approaches to achieving fault tolerance in measurement-based quantum computing. In this chapter, we describe an extremely promising fault-tolerant cluster state quantum computing scheme [RH07, RHG07] with a threshold error rate of 7.46 × 10 −3 , low overhead arbitrarily long-range logical gates and novel adjustable strength error correction capable of correcting general errors through the correction of Z errors only. Detailed proposed implementations of this scheme exist for ion traps [SJ09] and single photons with cavity mediated interactions [DGI+07]. The discussion is organized as follows. In Section 20.2, we describe the topological cluster state, which is a specific three-dimensional (3D) cluster state, and give a brief overview of what topological cluster state quantum computing involves. Section 20.3 describes logical qubits in more detail and how to initialize them to ∣0 L 〉 and ∣+ L 〉 and measure them in the Z L and X L bases. State injection, the non-fault-tolerant construction of arbitrary logical states, is covered in Section 20.4. Logical gates, namely the logical identity gate and the logical CNOT gate, are discussed in Section 20.5 along with their byproduct operators. Section 20.6 describes the errorcorrection procedure. In Section 20.7, we calculate an estimate for the threshold of this scheme. Section 20.8 presents an analysis of the overhead as a function of both the circuit size and the error rate.

Cambridge University Press eBooks•Sep 5, 2013•1 citation

The ABCs of the Color Code: A Study of Topological Quantum Codes as Toy Models for Fault-Tolerant Quantum Computation and Quantum Phases Of Matter

Aleksander Kubica

This thesis is devoted to studying a class of quantum error-correcting codes — topological quantum codes. We explore the question of how one can achieve fault- tolerant quantum computation with topological codes. We treat quantum error-correcting codes not only as a compelling ingredient needed to build a quantum computer, but also as a useful theoretical tool in other areas of physics. In particular, we explore what insights topological codes can provide into challenging questions, such as the classification of quantum phases of matter. In this thesis, we focus on a family of topological codes — color codes, which are particularly intriguing due to the rich physics they display and their computational power. We start by introducing color codes and explaining their basic properties. Then, we show how to perform fault-tolerant universal quantum computation with three-dimensional color codes by transverse gates and code switching. We later compare the resource overhead of the code-switching approach with that of a state distillation scheme. We discuss how to perform error correction with the toric and color codes, as well as introduce local decoders for those two families of codes. By exploiting a connection between error correction and statistical mechanics we estimate the storage threshold error rates for bit-flip and phase-flip noise in the three-dimensional color code. We finish by showing that the color and toric code families in d dimensions are equivalent in a sense of local unitary transformations and explore implications of this equivalence.

•May 29, 2018•28 citations

Efficient fault-tolerant decoding of topological color codes

Ashley M. Stephens

Topological color codes defined by the 4.8.8 semiregular lattice feature geometrically local check operators and admit transversal implementation of the entire Clifford group, making them promising candidates for fault-tolerant quantum computation. Recently, several efficient algorithms for decoding the syndrome of color codes were proposed. Here, we modify one of these algorithms to account for errors affecting the syndrome, applying it to the family of triangular 4.8.8 color codes encoding one logical qubit. For a three-dimensional bit-flip channel, we report a threshold error rate of 0.0208(1), compared with 0.0305(4) previously reported for an integer-program-based decoding algorithm. When we account for circuit details, this threshold is reduced to 0.00143(1) per gate, compared with 0.00672(1) per gate for the surface code under an identical noise model.

arXiv:1402.3037•Feb 13, 2014•15 citations

A 3D lattice defect and efficient computations in topological MBQC

Gabrielle Tournaire, Marvin Schwiering, Robert Raussendorf +1 more

We describe an efficient, fully fault-tolerant implementation of Measurement-Based Quantum Computation (MBQC) in the 3D cluster state. The two key novelties are (i) the introduction of a lattice defect in the underlying cluster state and (ii) the use of the Rudolph-Grover rebit encoding. Concretely, (i) allows for a topological implementation of the Hadamard gate, while (ii) does the same for the phase gate. Furthermore, we develop general ideas towards circuit compaction and algorithmic circuit verification, which we implement for the Reed-Muller code used for magic state distillation. Our performance analysis highlights the overall improvements provided by the new methods.

arXiv:2412.09781•Quantum•Feb 6, 2026•2 citations

Encoder Circuit For Surface Code using Measurement-Based Quantum Computing Model

Priyam Srivastava, Vaibhav Katyal, Ankur Raina

Surface codes are one of the most important topological stabilizer codes in the theory of quantum error correction. In this paper, we provide an efficient way to obtain surface codes through Measurement-based quantum computation (MBQC) using cluster state as the resource state. Simple twodimensional surface codes are studied and analyzed using stabilizer formalism. We also present an algorithm to computationally obtain the stabilizer of the surface codes, through which we later determine the distance of the codes. We note the difference in the stabilizers of the surface codes obtained by Fowler et al. wherein they used CNOT entangling operation to create the resource state as opposed to the cluster state which is formed using CZ entangling operation. We provide a theoretical calculation to understand this difference. The obtained surface codes can be used practically as an encoder circuit to encode one logical qubit.

arXiv:2306.10267•Jun 17, 2023•0 citations
Topological measurement-based quantum computation (MBQC) enables one to carry out universal fault-tolerant quantum computation via single-qubit measurements with a family of large entangled states called cluster states as resources. Raussendorf's three-dimensional cluster states (RTCSs) based on the surface codes are mainly considered for topological MBQC. In such schemes, however, the logical Hadamard, phase (Z1/2)({Z}^{1/2})(Z1/2), and TTT (Z1/4)({Z}^{1/4})(Z1/4) gates which are essential for building up arbitrary logical gates are not implemented natively without using state distillation or lattice dislocations, to the best of our knowledge. In particular, state distillation generally consumes many ancillary logical qubits; thus it is a severe obstacle against practical quantum computing. To solve this problem, we suggest an MBQC scheme via a family of cluster states called color-code-based cluster states (CCCSs) based on the two-dimensional color codes instead of the surface codes. We define logical qubits, construct elementary logical gates, and describe error correction schemes. We show that all logical Clifford gates generated by the cnot, Hadamard, and phase gates can be implemented natively in a fault-tolerant manner, although the TTT gate still requires state distillation to be fault-tolerant. The error thresholds of MBQC via CCCSs for logical-ZZZ errors are calculated to be 2.7%--2.8%, which are comparable to the values for RTCSs, assuming a simple error model where physical qubits have nontrivial errors independently with the same probability. We analyze and compare the resource overheads of both the schemes. In particular, we show that the number of physical qubits required for implementing a phase gate with CCCSs is at least about 26 times smaller than with RTCSs using state distillation, for the same code distance.
Fault-tolerant measurement-based quantum computing (MBQC) provides a compelling framework for fault-tolerant quantum computation, in which quantum information is processed through single-qubit measurements on a three-dimensional entangled resource known as cluster state. To date, this resource has been predominantly studied on Euclidean lattices, most notably in the Raussendorf-Harrington-Goyal (RHG) construction, which underlies topological fault tolerance in MBQC. In this work, we introduce the hyperbolic cluster state, a generalization of the three-dimensional cluster state to negatively curved geometries, obtained via the foliation of periodic hyperbolic lattices. We present an explicit construction of hyperbolic cluster states and investigate their fault-tolerant properties under a realistic circuit-level depolarizing noise model. Using large-scale numerical simulations, we perform memory experiments to characterize their logical error rates and decoding performance. Our results demonstrate that hyperbolic cluster states exhibit a fault-tolerance threshold comparable to that of the Euclidean RHG cluster state, while simultaneously supporting a constant encoding rate in the thermodynamic limit. This represents a substantial improvement in qubit overhead relative to conventional cluster-state constructions. These findings establish hyperbolic geometry as a powerful and experimentally relevant resource for scalable, fault-tolerant MBQC and open new avenues for leveraging negative curvature in quantum information processing.
Introduction Cluster states were introduced in Chapter 18, along with some of the approaches to achieving fault tolerance in measurement-based quantum computing. In this chapter, we describe an extremely promising fault-tolerant cluster state quantum computing scheme [RH07, RHG07] with a threshold error rate of 7.46 × 10 −3 , low overhead arbitrarily long-range logical gates and novel adjustable strength error correction capable of correcting general errors through the correction of Z errors only. Detailed proposed implementations of this scheme exist for ion traps [SJ09] and single photons with cavity mediated interactions [DGI+07]. The discussion is organized as follows. In Section 20.2, we describe the topological cluster state, which is a specific three-dimensional (3D) cluster state, and give a brief overview of what topological cluster state quantum computing involves. Section 20.3 describes logical qubits in more detail and how to initialize them to ∣0 L 〉 and ∣+ L 〉 and measure them in the Z L and X L bases. State injection, the non-fault-tolerant construction of arbitrary logical states, is covered in Section 20.4. Logical gates, namely the logical identity gate and the logical CNOT gate, are discussed in Section 20.5 along with their byproduct operators. Section 20.6 describes the errorcorrection procedure. In Section 20.7, we calculate an estimate for the threshold of this scheme. Section 20.8 presents an analysis of the overhead as a function of both the circuit size and the error rate.
This thesis is devoted to studying a class of quantum error-correcting codes — topological quantum codes. We explore the question of how one can achieve fault- tolerant quantum computation with topological codes. We treat quantum error-correcting codes not only as a compelling ingredient needed to build a quantum computer, but also as a useful theoretical tool in other areas of physics. In particular, we explore what insights topological codes can provide into challenging questions, such as the classification of quantum phases of matter. In this thesis, we focus on a family of topological codes — color codes, which are particularly intriguing due to the rich physics they display and their computational power. We start by introducing color codes and explaining their basic properties. Then, we show how to perform fault-tolerant universal quantum computation with three-dimensional color codes by transverse gates and code switching. We later compare the resource overhead of the code-switching approach with that of a state distillation scheme. We discuss how to perform error correction with the toric and color codes, as well as introduce local decoders for those two families of codes. By exploiting a connection between error correction and statistical mechanics we estimate the storage threshold error rates for bit-flip and phase-flip noise in the three-dimensional color code. We finish by showing that the color and toric code families in d dimensions are equivalent in a sense of local unitary transformations and explore implications of this equivalence.
Topological color codes defined by the 4.8.8 semiregular lattice feature geometrically local check operators and admit transversal implementation of the entire Clifford group, making them promising candidates for fault-tolerant quantum computation. Recently, several efficient algorithms for decoding the syndrome of color codes were proposed. Here, we modify one of these algorithms to account for errors affecting the syndrome, applying it to the family of triangular 4.8.8 color codes encoding one logical qubit. For a three-dimensional bit-flip channel, we report a threshold error rate of 0.0208(1), compared with 0.0305(4) previously reported for an integer-program-based decoding algorithm. When we account for circuit details, this threshold is reduced to 0.00143(1) per gate, compared with 0.00672(1) per gate for the surface code under an identical noise model.
We describe an efficient, fully fault-tolerant implementation of Measurement-Based Quantum Computation (MBQC) in the 3D cluster state. The two key novelties are (i) the introduction of a lattice defect in the underlying cluster state and (ii) the use of the Rudolph-Grover rebit encoding. Concretely, (i) allows for a topological implementation of the Hadamard gate, while (ii) does the same for the phase gate. Furthermore, we develop general ideas towards circuit compaction and algorithmic circuit verification, which we implement for the Reed-Muller code used for magic state distillation. Our performance analysis highlights the overall improvements provided by the new methods.
Surface codes are one of the most important topological stabilizer codes in the theory of quantum error correction. In this paper, we provide an efficient way to obtain surface codes through Measurement-based quantum computation (MBQC) using cluster state as the resource state. Simple twodimensional surface codes are studied and analyzed using stabilizer formalism. We also present an algorithm to computationally obtain the stabilizer of the surface codes, through which we later determine the distance of the codes. We note the difference in the stabilizers of the surface codes obtained by Fowler et al. wherein they used CNOT entangling operation to create the resource state as opposed to the cluster state which is formed using CZ entangling operation. We provide a theoretical calculation to understand this difference. The obtained surface codes can be used practically as an encoder circuit to encode one logical qubit.