Abstract Semi-device independent (Semi-DI) quantum random number generators (QRNGs) gained attention for security applications, offering an excellent trade-off between security and generation rate. This paper presents a proof-of-principle time-bin encoding semi-DI QRNG experiments based on a prepare-and-measure scheme. The protocol requires two simple assumptions and a measurable condition: an upper-bound on the prepared pulses’ energy. We lower-bound the conditional min-entropy from the energy-bound and the input–output correlation, determining the amount of genuine randomness that can be certified. Moreover, we present a generalized optimization problem for bounding the min-entropy in the case of multiple input and outcomes, in the form of a semidefinite program. The protocol is tested with a simple experimental setup, capable of realizing two configurations for the ternary time-bin encoding scheme. The experimental setup is easy-to-implement and comprises commercially available off-the-shelf components at the telecom wavelength, granting a secure and certifiable entropy source. The combination of ease-of-implementation, scalability, high security level and output-entropy, make our system a promising candidate for commercial QRNGs.
Abstract Semi-device independent (Semi-DI) quantum random number generators (QRNGs) gained attention for security applications, offering an excellent trade-off between security and generation rate. This paper presents a proof-of-principle time-bin encoding semi-DI QRNG experiments based on a prepare-and-measure scheme. The protocol requires two simple assumptions and a measurable condition: an upper-bound on the prepared pulses’ energy. We lower-bound the conditional min-entropy from the energy-bound and the input–output correlation, determining the amount of genuine randomness that can be certified. Moreover, we present a generalized optimization problem for bounding the min-entropy in the case of multiple input and outcomes, in the form of a semidefinite program. The protocol is tested with a simple experimental setup, capable of realizing two configurations for the ternary time-bin encoding scheme. The experimental setup is easy-to-implement and comprises commercially available off-the-shelf components at the telecom wavelength, granting a secure and certifiable entropy source. The combination of ease-of-implementation, scalability, high security level and output-entropy, make our system a promising candidate for commercial QRNGs.
Quantum random number generators (QRNGs) produce true random numbers based on the inherent randomness of quantum theory, rendering them a foundational segment of quantum cryptography. Distinguished from trusted-device QRNGs whose security depends on characterized devices, semi-device-independent (semi-DI) QRNGs permit partial devices to be defective or even maliciously manipulated, which achieves a good trade-off between generation rate and security. In this paper, we propose a semi-DI QRNG that resists general attacks while accounting for finite-size effects. The protocol requires no rigorous characterization of the source and measurement devices other than limiting the energy of the emitted states, significantly reducing the demands on practical QRNG systems. Leveraging the tight Kato inequality for correlated variables, we show that our protocol generates more randomness than it consumes. Furthermore, we demonstrate the scheme on a continuous-variable system with ternary inputs of states. Heterodyne detection is employed to enable phase compensation through data postprocessing, alleviating the stringent requirement on system stability. The system operates at 100 MHz, achieving a net random number generation rate of 1.165 Mbps at 5.3x10^9 rounds. Our work offers a promising approach to achieve both the robust security and high generation rate with a simple experimental setup.
Semi-device-independent QRNG frameworks represent a particularly attractive approach, combining strong security guarantees with high randomness generation rates while relying only on reduced and practical physical assumptions. A recently proposed approach based on photon-number constraints is particularly suited to photonic implementations, where these assumptions can be easily assessed experimentally. Here, we experimentally demonstrate a quantum random number generator within this framework, enabling the direct computation of lower bounds on the certifiable Shannon entropy via semidefinite relaxation techniques. When combined with entropy accumulation methods, this approach enables finite-size randomness certification without assuming independent and identically distributed rounds. We realize the protocol using a four-state coherent-state constellation symmetrically distributed in phase space and measured by heterodyne detection, certifying 0.223 bit per measurement, which is the highest value reported to date for a continuous-variable semi-device-independent QRNG. The implementation combines a low-loss integrated photonic heterodyne receiver with a simple transmitter assembled from commercial components, providing a practical and high-speed architecture for semi-device-independent randomness generation.
Abstract Random number generators (RNG) based on quantum mechanics are captivating due to their security and unpredictability compared to conventional generators, such as pseudo-random number generators and hardware-random number generators. This work analyzes evolutions in the extractable amount of randomness with increasing the Hilbert space dimension, state preparation subspace, or measurement subspace in a class of semi-device-independent quantum-RNG, where bounding the states’ overlap is the core assumption, built on the prepare-and-measure scheme. We further discuss the effect of these factors on the complexity and draw a conclusion on the optimal scenario. We investigate the generic case of time-bin encoding scheme, define various input (state preparation) and outcome (measurement) subspaces, and discuss the optimal scenarios to obtain maximum entropy. Several input designs were experimentally tested and analyzed for their conceivable outcome arrangements. We evaluated their performance by considering the device’s imperfections, particularly the after-pulsing effect and dark counts of the detectors. Finally, we demonstrate that this approach can boost the system entropy, resulting in more extractable randomness.
For quantum random number generators (QRNGs), strong security guarantees can be obtained under various assumptions. The most well-known assumptions are the non-signalling assumption (needed for device-independent (DI) QRNG) and post-quantum computational assumptions (needed for computationally bounded single-prover QRNG protocols). In this work, we study a third model: a simple prepare-and-measure QRNG whose security relies on physically motivated energy constraints. This physically motivated set-up allows for easier implementations of QRNGs and can supply better rates.
So far, previous works that studied the energy-constrained model either assumed that the adversary is classical in their security proof or supplied relatively weak bounds on the certified randomness, by bounding the conditional min-entropy. In this work, we prove a new, essentially tight, lower bound on the single-round von Neumann entropy against adversaries holding both classical and quantum side-information. Our work reveals that working with the von Neumann entropy, rather than the min-entropy, in the quantum case can lead to a major improvement, nearly matching the classical bound in many cases. We further study the robustness of our entropy bound. Since the single-round von Neumann entropy is the main quantity of interest when characterizing the key rate of QRNGs, our bound establishes the main ingredient for rigorous security proofs against general quantum attacks in this framework.
We present a scheme for a self-testing quantum random number generator. Compared to the fully device-independent model, our scheme requires an extra natural assumption, namely that the mean energy per signal is bounded. The scheme is self-testing, as it allows the user to verify in real-time the correct functioning of the setup, hence guaranteeing the continuous generation of certified random bits. Based on a prepare-and-measure setup, our scheme is practical, and we implement it using only off-the-shelf optical components. The randomness generation rate is 1.25 Mbits/s, comparable to commercial solutions. Overall, we believe that this scheme achieves a promising trade-off between the required assumptions, ease-of-implementation and performance.
We introduce a scheme for a self-testing quantum random-number generator and demonstrate it experimentally. Compared to the fully device-independent model, our scheme requires an extra natural assumption, namely, that the mean number of photons of the signal optical modes is bounded. The scheme is self-testing, as it allows the user to verify in real time the correct functioning of the setup, hence guaranteeing the continuous generation of certified random bits. The scheme is based on a prepare-and-measure setup, which we implement in a proof-of-principle experiment using only off-the-shelf optical components. The randomness generation rate is 1.25 Mbits/s, comparable to commercial solutions. Overall, we believe that this scheme achieves a promising trade-off between the required assumptions, ease of implementation and performance.