Abstract It is well-known that the precision of a phase measurement with a Mach-Zehnder interferometer employing strong classic light can be greatly enhanced with the addition of weak nonclassical light. In the context of quantifying nonclassicality, the amount by which a nonclassical state can enhance precision in this way has been termed its ’metrological power’. To-date, the enhancement provided by weak nonclassical states has been calculated only for specific measurement configurations. Here we are able to optimize over all measurement configurations to obtain the maximum enhancement that can be achieved by any single or multi-mode nonclassical state together with strong classical states, for local and distributed quantum metrology employing any linear or nonlinear single-mode unitary transformation. Our analysis reveals that the quantum Fisher information for quadrature-displacement sensing is the sole property that determines the maximum achievable enhancement in all of these different scenarios, providing a unified quantification of the metrological power.
Abstract It is well-known that the precision of a phase measurement with a Mach-Zehnder interferometer employing strong classic light can be greatly enhanced with the addition of weak nonclassical light. In the context of quantifying nonclassicality, the amount by which a nonclassical state can enhance precision in this way has been termed its ’metrological power’. To-date, the enhancement provided by weak nonclassical states has been calculated only for specific measurement configurations. Here we are able to optimize over all measurement configurations to obtain the maximum enhancement that can be achieved by any single or multi-mode nonclassical state together with strong classical states, for local and distributed quantum metrology employing any linear or nonlinear single-mode unitary transformation. Our analysis reveals that the quantum Fisher information for quadrature-displacement sensing is the sole property that determines the maximum achievable enhancement in all of these different scenarios, providing a unified quantification of the metrological power.
Nonclassical states enable metrology with a precision beyond that possible with classical physics. Both for practical applications and to understand non-classicality as a resource, it is useful to know the maximum quantum advantage that can be provided by a nonclassical state when it is combined with arbitrary classical states. This advantage has been termed the power of a quantum state. A key open question is whether the metrological powers for the metrology of different quantities are related, especially metrology of force (acceleration) and phase shifts (time). Here we answer this question for all single-mode states, both for local and distributed metrology, by obtaining complete expressions for the metrological powers for the metrology of essentialy any quantity (any single-mode unitary transformation), as well as the linear networks that achieve this maximal precision. This shows that the metrological powers for all quantities are proportional to a single property of the state, which for pure states is the quadrature variance, maximized over all quadratures.
We establish the nonclassicality of continuous-variable states as a resource for quantum metrology. Based on the quantum Fisher information of multimode quadratures, we introduce the metrological power as a measure of nonclassicality with a concrete operational meaning of displacement sensitivity beyond the classical limit. This measure belongs to the resource theory of nonclassicality, which is nonincreasing under linear optical elements. Our Letter reveals that a single copy, highly nonclassical quantum state is intrinsically advantageous when compared to multiple copies of a quantum state with moderate nonclassicality. This suggests that metrological power is related to the degree of quantum macroscopicity. Finally, we demonstrate that metrological resources useful for nonclassical displacement sensing tasks can be always converted into a useful resource state for phase sensitivity beyond the classical limit.
Quantifying nonclassicality of a bosonic mode is an important but challenging task in quantum optics. Recently, a nonclassicality measure based on the concept of operational resource theory has been proposed [W. Ge, K. Jacobs, S. Asiri, M. Foss-Feig, and M. S. Zubairy, Phys. Rev. Res. 2, 023400 (2020)], which shows several crucial properties as a resource for quantum metrology. Here we apply the measure to evaluate and categorize different classes of nonclassical states. We discover a class of states that can achieve the maximum nonclassicality in the asymptotic limit of a large mean number of excitations. These states can provide the same sensitivity in place of a squeezed vacuum in a sensing scheme, e.g., the laser interferometer gravitational-wave observatory (LIGO) experiments. We also discover that the nonclassicality of certain states can be greatly improved with a single-photon addition. In addition, we explore some examples on how to evaluate analytically the nonclassicality of mixed states, which are in general difficult to calculate due to the convex roof nature of the measure. Our results will be useful for preparing and utilizing nonclassical states for applications in precision-sensing tasks, such as quadrature sensing and phase sensing in a Mach-Zehnder interferometer.
Abstract The precision of quantum measurements can be effectively improved by using both photon-added non-Gaussian operations and Kerr nonlinear phase shift. Here, we employ a coherent state mixed with a photon-added squeezed vacuum state as the input to a Mach–Zehnder interferometer with parity detection, thereby achieving a significant enhancement in phase measurement precision. Our research focuses on the phase sensitivity of linear phase shift under both ideal conditions and photon loss, as well as quantum Fisher information (QFI). The results demonstrate that employing the photon addition operations can markedly enhance phase sensitivity and QFI, and under optimal conditions, the measurement precision can approach the Heisenberg limit for the linear phase shift case. In addition, we delve deeper into the scenario of replacing the linear phase shift with a Kerr nonlinear one and systematically analyze the QFI under both ideal and photon loss conditions. By comparison, it is evident that employing both the photon addition operations and the Kerr nonlinear phase shift can further significantly enhance phase measurement precision while effectively improving the system’s robustness against photon loss. These findings are instrumental in facilitating the development and practical application of quantum metrology.
The fundamental precision limit of an interferometer is crucial since it bounds the best possible sensitivity one could achieve using such a device. This thesis will focus on several different interferometers and try to give the ultimate precision bounds by carefully counting all the resources used in the interferometers. The thesis begins with the basics of the quantum state of light. The fundamentals of quantum metrology are also reviewed and discussed. More specifically, the terminology of classical and quantum Cram\'er-Rao bound and classical and quantum Fisher information are introduced. Chapter 3 discusses the conclusive precision bounds in two-mode interferometer such as Mach-Zehnder interferometer (MZI) and SU(1,1) interferometer. I revisit the quantum Fisher information approach of these two interferometers and show the discrepancy of phase sensitivity on the physically same setup. Then I establish fundamental precision estimation bounds for such device, due to the reason that many works of literature fail to accurately count the resources and knowledge of phase-to-be-estimated used in the interferometers. The analysis suggests that for a MZI, one can never do better than SNL in phase sensitivity, when an input to one of the two ports is the vacuum. If one does not allow the detector to use any external phase reference or power resource, then the precision is limited by the SNL. For a SU(1,1) interferometer, firstly, when one of the input states is restricted to be a vacuum state, I showed that by using either the phase-averaging method or the quantum Fisher information matrix method, different phase configurations of the SU(1,1) interferometer result in the same QFI. Secondly, I compared the results of the phase-averaging method and the quantum Fisher information matrix method, and then I argued that for an SU(1,1) interferometer, phase averaging or quantum Fisher information matrix method is generally required, and they are equivalent. Finally, I used the quantum Fisher information matrix method to calculate the precision limit for other common input states, such as two coherent state inputs or coherent state with squeezed vacuum inputs. In chapter 4, I will consider a passive multi-mode interferometer for multiparameter phase estimation. It was suggested that optical networks with relatively inexpensive overhead---single photon Fock states, passive optical elements, and single photon detection---can show significant improvements over classical strategies for single-parameter estimation, when the number of modes in the network is small. In this chapter, I analytically compute the quantum Cramer-Rao bound to show these
Quantum metrology aims to achieve measurement precision that surpasses classical limits in the estimation of physical parameters. In realistic conditions, however, its advantage can be diminished by interactions between a quantum system and its environment. This necessitates careful design of quantum resources that can sustain enhanced performance even under noise. Here, we investigate how a quantum non-Gaussian operation can provide an advantage in noisy quantum metrology. Specifically, we examine the effect of single-photon subtraction applied to a two-mode squeezed vacuum state in the task of phase estimation using a Mach–Zehnder interferometer under photon loss. The single-photon subtraction can be implemented either before or after the first beam splitter in the interferometer. By evaluating the quantum Fisher information for both the original and the photon-subtracted states, we assess the potential enhancement in sensing precision. We show that the enhancement occurs when photon subtraction is performed before the first beam splitter, provided that loss acts only on the signal mode. Our findings shed light on the role of non-Gaussian operations in noisy quantum metrology, clarifying when photon subtraction can yield a genuine advantage over Gaussian resources.