Fault-tolerant quantum error correction is essential for implementing quantum algorithms of significant practical importance.In this work, we propose a highly effective use of the surface Gottesman-Kitaev-Preskill (GKP) code, i.e., the surface code consisting of bosonic GKP qubits instead of bare two-level qubits.In our proposal, we use error-corrected two-qubit gates between GKP qubits and introduce a maximum-likelihood decoding strategy for correcting shift errors in the two-GKP-qubit gates.Our proposed decoding reduces the total CNOT failure rate of the GKP qubits, e.g., from 0.87% to 0.36% at a GKP squeezing of 12 dB, compared to the case where the simple closest-integer decoding is used.Then, by concatenating the GKP code with the surface code, we find that the threshold GKP squeezing is given by 9.9 dB under the the assumption that finite squeezing of the GKP states is the dominant noise source.More importantly, we show that a low logical failure rate p L < 10 -7 can be achieved with moderate hardware requirements, e.g., 291 modes and 97 qubits at a GKP squeezing of 12 dB as opposed to 1457 bare qubits for the standard rotated surface code at an equivalent noise level (i.e., p = 0.36%).Such a low failure rate of our surface-GKP code is possible through the use of space-time correlated edges in the matching graphs of the surface-code decoder.Further, all edge weights in the matching graphs are computed dynamically based on analog information from the GKP error correction using the full history of all syndrome measurement rounds.We also show that a highly squeezed GKP state of GKP squeezing 12 dB can be experimentally realized by using a dissipative stabilization method, namely, the big-small-big method, with fairly conservative experimental parameters.Lastly, we introduce a three-level ancilla scheme to mitigate ancilla decay errors during a GKP state preparation.
Fault-tolerant quantum error correction is essential for implementing quantum algorithms of significant practical importance.In this work, we propose a highly effective use of the surface Gottesman-Kitaev-Preskill (GKP) code, i.e., the surface code consisting of bosonic GKP qubits instead of bare two-level qubits.In our proposal, we use error-corrected two-qubit gates between GKP qubits and introduce a maximum-likelihood decoding strategy for correcting shift errors in the two-GKP-qubit gates.Our proposed decoding reduces the total CNOT failure rate of the GKP qubits, e.g., from 0.87% to 0.36% at a GKP squeezing of 12 dB, compared to the case where the simple closest-integer decoding is used.Then, by concatenating the GKP code with the surface code, we find that the threshold GKP squeezing is given by 9.9 dB under the the assumption that finite squeezing of the GKP states is the dominant noise source.More importantly, we show that a low logical failure rate p L < 10 -7 can be achieved with moderate hardware requirements, e.g., 291 modes and 97 qubits at a GKP squeezing of 12 dB as opposed to 1457 bare qubits for the standard rotated surface code at an equivalent noise level (i.e., p = 0.36%).Such a low failure rate of our surface-GKP code is possible through the use of space-time correlated edges in the matching graphs of the surface-code decoder.Further, all edge weights in the matching graphs are computed dynamically based on analog information from the GKP error correction using the full history of all syndrome measurement rounds.We also show that a highly squeezed GKP state of GKP squeezing 12 dB can be experimentally realized by using a dissipative stabilization method, namely, the big-small-big method, with fairly conservative experimental parameters.Lastly, we introduce a three-level ancilla scheme to mitigate ancilla decay errors during a GKP state preparation.
Fault-tolerant quantum error correction is essential for implementing quantum algorithms of significant practical importance. In this work, we propose a highly effective use of the surface-GKP code, i.e., the surface code consisting of bosonic GKP qubits instead of bare two-dimensional qubits. In our proposal, we use error-corrected two-qubit gates between GKP qubits and introduce a maximum likelihood decoding strategy for correcting shift errors in the two-GKP-qubit gates. Our proposed decoding reduces the total CNOT failure rate of the GKP qubits, e.g., from 0.87% to 0.36% at a GKP squeezing of 12dB, compared to the case where the simple closest-integer decoding is used. Then, by concatenating the GKP code with the surface code, we find that the threshold GKP squeezing is given by 9.9dB under the the assumption that finite-squeezing of the GKP states is the dominant noise source. More importantly, we show that a low logical failure rate pL<10−7 can be achieved with moderate hardware requirements, e.g., 291 modes and 97 qubits at a GKP squeezing of 12dB as opposed to 1457 bare qubits for the standard rotated surface code at an equivalent noise level (i.e., p=0.36%). Such a low failure rate of our surface-GKP code is possible through the use of space-time correlated edges in the matching graphs of the surface code decoder. Further, all edge weights in the matching graphs are computed dynamically based on analog information from the GKP error correction using the full history of all syndrome measurement rounds. We also show that a highly-squeezed GKP state of GKP squeezing ≳12dB can be experimentally realized by using a dissipative stabilization method, namely, the Big-small-Big method, with fairly conservative experimental parameters. Lastly, we introduce a three-level ancilla scheme to mitigate ancilla decay errors during a GKP state preparation.
Bosonic codes provide an alternative option for quantum error correction. An important category of bosonic codes called the Gottesman-Kitaev-Preskill (GKP) code has aroused much interest recently. Theoretically, the error correction ability of the GKP code is limited since it can only correct small shift errors in position and momentum quadratures. A natural approach to promote the GKP error correction for large-scale, fault-tolerant quantum computation is concatenating encoded GKP states with a stabilizer code. The performance of the XZZX surface-GKP code, i.e., the single-mode GKP code concatenated with the XZZX surface code is investigated in this paper under two different noise models. Firstly, in the code-capacity noise model, the asymmetric rectangular GKP code with parameter $\ensuremath{\lambda}$ is introduced. Using the minimum weight perfect matching decoder combined with the continuous-variable GKP information, the optimal threshold of the XZZX-surface GKP code reaches $\ensuremath{\sigma}\ensuremath{\approx}0.67$ when $\ensuremath{\lambda}=2.1$, compared with the threshold $\ensuremath{\sigma}\ensuremath{\approx}0.60$ of the standard surface-GKP code. Secondly, we analyze the shift errors of two-qubit gates in the actual implementation and build the full circuit-level noise model. By setting the appropriate bias parameters, the logical error rate is reduced by several times in some cases. These results indicate the XZZX surface-GKP codes are more suitable for asymmetric concatenation under the general noise models. We also estimate the overhead of the XZZX-surface GKP code which uses about 291 GKP states with the noise parameter 18.5 dB ($\ensuremath{\kappa}/g\ensuremath{\approx}0.71%$) to encode a logical qubit with the error rate $2.53\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}7}$, compared with the qubit-based surface code using 3041 qubits to achieve almost the same logical error rate.
In order to solve practical problems on a quantum computer, it is necessary to use fault-tolerant quantum error correction schemes to overcome noise: the errors arising from imperfections in physical components. The Gottesman-Kitaev-Preskill (GKP) code aims at achieving this in a hardware efficient manner by encoding finite-dimensional logical subspaces in the Hilbert space of one or more continuous variable modes. In near term implementations, however, it is not feasible to eliminate errors entirely, so it is natural to also employ alternative error mitigation techniques together with error correction. In this work, we study a quantum error mitigation method known as probabilistic error cancellation in the context of the GKP code. We compare Steane-type and teleportation-based GKP error correction, and calculate the sampling overheads associated with the technique for square and hexagonal GKP codes. We employ the stabilizer subsystem decomposition for GKP codes to obtain an effective logical channel for noisy operations that is used to express the ideal one of a target logical unitary. We consider noise from finite squeezing on the data and the two ancilla modes, needed for error correction, and examine the relationship between the sampling overhead and the noise for different decoding methods. Our results are calculated for single- and two-qubit GKP Clifford gates and one round of error correction, and show the nontrivial combination of error correction and mitigation in continuous variable codes.
Fault-tolerant quantum error correction requires repeated syndrome extraction to address errors induced by the syndrome-extraction circuit itself. However, repeated syndrome extraction incurs significant overhead in terms of gate count and ancilla consumption (e.g., Gottesman-Kitaev-Preskill (GKP) states). Moreover, noisy syndrome extraction can itself inject additional errors into the data qubits. To address these issues, we propose a concrete adaptive skipping scheme for the surface-GKP code, a representative GKP-concatenated architecture, that uses analog information naturally generated during inner GKP correction. At each round, the scheme selects one of four actions: measuring both Z-type and X-type surface-code stabilizers, measuring only one type, or skipping both types and reusing previous syndromes. The decision is based on a reliability comparison between reusing the previous syndrome value and performing a new noisy syndrome extraction. Using circuit-level simulations, we show that the adaptive skipping scheme can reduce the number of surface-code stabilizer measurements while maintaining logical error rates comparable to or lower than those of the full-measurement baseline. The improvement is most pronounced when gate and measurement noise are larger than idle noise, so that avoiding unnecessary syndrome extraction reduces the noise injected into the code. These results indicate that analog information from inner GKP correction can be used not only to improve decoding but also to reduce the measurement overhead of outer-code syndrome extraction.
We study the code obtained by concatenating the standard single-mode Gottesman-Kitaev-Preskill (GKP) code with the surface code. We show that the noise tolerance of this surface--GKP code with respect to (Gaussian) displacement errors improves when a single-mode squeezing unitary is applied to each mode, assuming that the identification of quadratures with logical Pauli operators is suitably modified. We observe noise-tolerance thresholds of up to $\ensuremath{\sigma}\ensuremath{\approx}0.58$ shift-error standard deviation when the surface code is decoded without using GKP syndrome information. In contrast, prior results by K. Fukui, A. Tomita, A. Okamoto, and K. Fujii, High-Threshold Fault-Tolerant Quantum Computation with Analog Quantum Error Correction, Phys. Rev. X 8, 021054 (2018) and C. Vuillot, H. Asasi, Y. Wang, L. P. Pryadko, and B. M. Terhal, Quantum error correction with the toric Gottesman-Kitaev-Preskill code, Phys. Rev. A 99, 032344 (2019) report a threshold between $\ensuremath{\sigma}\ensuremath{\approx}0.54$ and $\ensuremath{\sigma}\ensuremath{\approx}0.55$ for the standard (toric, respectively) surface--GKP code. The modified surface--GKP code effectively renders the mode-level physical noise asymmetric, biasing the logical-level noise on the GKP qubits. The code can thus benefit from the resilience of the surface code against biased noise. We use the approximate maximum likelihood decoding algorithm of S. Bravyi, M. Suchara, and A. Vargo, Efficient algorithms for maximum likelihood decoding in the surface code, Phys. Rev. A 90, 032326 (2014) to obtain our threshold estimates. Throughout, we consider an idealized scenario where measurements are noiseless and GKP states are ideal. Our paper demonstrates that Gaussian encodings of individual modes can enhance concatenated codes.
The Gottesman-Kitaev-Preskill (GKP) code is an important type of bosonic quantum error-correcting code. Since the GKP code only protects against small shift errors in $\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{p}$ and $\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{q}$ quadratures, it is necessary to concatenate the GKP code with a stabilizer code for the larger error correction. In this paper, we consider the concatenation of the single-mode GKP code with the two-dimensional (2D) color code (color-GKP code) on the square-octagon lattice. We use the Steane-type scheme with a maximum-likelihood estimation for GKP error correction and show its advantage for the concatenation. In our main paper, the minimum-weight perfect matching algorithm is applied to decode the color-GKP code. Complemented with the continuous-variable information from the GKP code, the threshold of the 2D color code is improved. If only data GKP qubits are noisy, the threshold reaches $\ensuremath{\sigma}\ensuremath{\approx}0.59(\overline{p}\ensuremath{\approx}13.3%)$ compared with p=10.2 of the normal 2D color code. If measurements are also noisy, we introduce the generalized restriction decoder on the three-dimensional space-time graph for decoding. The threshold reaches $\ensuremath{\sigma}\ensuremath{\approx}0.46$ when measurements in the GKP error correction are noiseless, and $\ensuremath{\sigma}\ensuremath{\approx}0.24$ when all measurements are noisy. Lastly, the good performance of the generalized restriction decoder is also shown on the normal 2D color code giving the threshold at 3.1 under the phenomenological error model.