Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2103.06461 · Physical Review Applied

Customized Quantum Annealing Schedules

Mostafa Khezri, Xi Dai, Rui Liang Yang, Tameem Albash, Adrian Lupaşcu, Daniel A. Lidar

Published Apr 4, 2022• 14 citations
arXivHTMLPDF

Abstract

In a typical quantum annealing protocol, the system starts with a transverse field Hamiltonian that is gradually turned off and replaced by a longitudinal Ising Hamiltonian. The ground state of the Ising Hamiltonian encodes the solution to the computational problem of interest, and the state overlap with this ground state gives the success probability of the annealing protocol. The form of the annealing schedule can have a significant impact on the ground-state overlap at the end of the anneal, so precise control over these annealing schedules can be a powerful tool for increasing success probabilities of annealing protocols. Here we show how superconducting circuits, in particular capacitively shunted flux qubits, can be used to construct quantum annealing systems by providing tools for mapping circuit flux biases to Pauli coefficients. We use this mapping to find customized annealing schedules: appropriate circuit control biases that yield a desired annealing schedule, while accounting for the physical limitations of the circuitry. We then provide examples and proposals that utilize this capability to improve quantum annealing performance.

DOI
10.1103/physrevapplied.17.044005

Related papers

Anneal-path correction in flux qubits

Mostafa Khezri, Jeffrey A. Grover, James I. Basham +5 more

Abstract Quantum annealers require accurate control and optimized operation schemes to reduce noise levels, in order to eventually demonstrate a computational advantage over classical algorithms. We study a high coherence four-junction capacitively shunted flux qubit (CSFQ), using dispersive measurements to extract system parameters and model the device. Josephson junction asymmetry inherent to the device causes a deleterious nonlinear cross-talk when annealing the qubit. We implement a nonlinear annealing path to correct the asymmetry in situ, resulting in a substantial increase in the probability of the qubit being in the correct state given an applied flux bias. We also confirm the multi-level structure of our CSFQ circuit model by annealing it through small spectral gaps and observing quantum signatures of energy level crossings. Our results demonstrate an anneal-path correction scheme designed and implemented to improve control accuracy for high-coherence and high-control quantum annealers, which leads to an enhancement of success probability in annealing protocols.

arXiv:2002.11217•npj Quantum Information•Feb 16, 2021•12 citations

Programming a D-wave annealing-based quantum computer: tools and techniques

Scott Pakin, Steven P. Reinhardt

Quantum annealing is a form of quantum computing that exploits quantum effects to probabilistically solve a specific, NP-hard problem: finding the ground state of a classical, Ising-model Hamiltonian. Because physical quantum annealers are already available, there exists the pressing question of how to program such systems. That is, how can one map a computational problem into the coefficients of an Ising-model Hamiltonian for solution by quantum-annealing hardware? In this article, we address that question primarily from a practical standpoint. We survey extant software tools intended for programming D-wave annealing-based quantum processors and examine the programming model and solution technique promoted by each tool in an attempt to showcase the variety of contemporary approaches to solving computationally challenging problems on an existing annealing-based quantum computer.

Quantum Information and Computation•Sep 1, 2019•1 citation

Superconducting quantum circuit of NOR in quantum annealing

Daisuke Saida, Mutsuo Hidaka, Kouhei Miyake +2 more

The applicability of quantum annealing to various problems can be improved by expressing the Hamiltonian using a circuit satisfiability problem. We investigate the detailed characteristics of the NOR/NAND functions of a superconducting quantum circuit, which are the basic building blocks to implementing various types of problem Hamiltonians. The circuit is composed of superconducting flux qubits with all-to-all connectivity, where direct magnetic couplers are utilized instead of the variable couplers in the conventional superconducting quantum circuit. This configuration provides efficient scalability because the problem Hamiltonian is implemented using fewer qubits. We present an experiment with a complete logic operation of NOR/NAND, in which the circuit produces results with a high probability of success for arbitrary combinations of inputs. The features of the quantum circuit agree qualitatively with the theory, especially the mechanism for an operation under external flux modulation. Moreover, by calibrating the bias conditions to compensate for the offset flux from the surrounding circuit, the quantum circuit quantitatively agrees with the theory. To achieve true quantum annealing, we discuss the effects of the reduction in electric noise in quantum annealing.

Scientific Reports•Sep 23, 2022•6 citations

Obtaining Ground States of the XXZ Model Using the Quantum Annealing with Inductively Coupled Superconducting Flux Qubits

Takashi Imoto, Yuya Seki, Yuichiro Matsuzaki

Preparing ground states of Hamiltonians is important in the condensed matter physics and the quantum chemistry. The interaction Hamiltonians typically contain not only diagonal but also off-diagonal elements. Although quantum annealing provides a way to prepare a ground state of a Hamiltonian, we can only use the Hamiltonian with Ising interaction by using currently available commercial quantum annealing devices. In this work, we propose a quantum annealing for the XXZ model, which contains both Ising interaction and energy-exchange interaction, by using inductively coupled superconducting flux qubits. The key idea is to use a recently proposed spin-lock quantum annealing where the qubits are driven by microwave fields. As long as the rotating wave approximation is valid, the inductive coupling between the superconducting flux qubits produces the desired Hamiltonian in the rotating frame, and we can use such an interaction for the quantum annealing while the microwave fields driving play a role of the transverse fields. To quantify the performance of our scheme, we implement numerical simulations, and show that we can prepare ground states of the two-dimensional Heisenberg model with a high fidelity.

arXiv:2112.12419•Journal of the Physical Society of Japan•May 9, 2022•12 citations

Genetic optimization of quantum annealing

Pratibha Raghupati Hegde, Gianluca Passarelli, Annarita Scocco +1 more

The study of optimal control of quantum annealing by modulating the pace of evolution and by introducing a counterdiabatic potential has gained significant attention in recent times. In this work, we present a numerical approach based on genetic algorithms to improve the performance of quantum annealing, which evades the Landau-Zener transitions to navigate to the ground state of the final Hamiltonian with high probability. We optimize the annealing schedules starting from the polynomial ansatz by treating their coefficients as chromosomes of the genetic algorithm. We also explore shortcuts to adiabaticity by computing a practically feasible $k$-local optimal driving operator, showing that even for $k=1$ we achieve substantial improvement of the fidelity over the standard annealing solution. With these genetically optimized annealing schedules and/or optimal driving operators, we are able to perform quantum annealing in relatively short timescales and with higher fidelity compared to traditional approaches.

arXiv:2108.03185•Physical Review A•Jan 26, 2022•36 citations

Mapping state transition susceptibility in quantum annealing

Elijah Pelofske

Quantum annealing is a novel type of analog computation that aims to use quantum-mechanical fluctuations to search for optimal solutions for Ising problems. Quantum annealing in the transverse field Ising model, implemented on D-Wave devices, works by applying a time-dependent transverse field, which puts all qubits into a uniform state of superposition, and then applying a Hamiltonian over time, which describes a user-programed Ising problem. We present a method that utilizes two control features of D-Wave quantum annealers, namely reverse annealing and an $h$-gain schedule, to quantify the susceptibility, or the distance, between two classical states of an Ising problem. The starting state is encoded using reverse annealing, and the second state is encoded on the linear terms of a problem Hamiltonian. An $h$-gain schedule is specified, which incrementally increases the strength of the linear terms, thus allowing a quantification of the $h$-gain strength required to transition the anneal into a specific state at the final measurement. Because of the nature of quantum annealing, the state tends towards global minima, and therefore we restrict the second classical state to a minimum solution of the given Ising problem. This susceptibility mapping, when enumerated across all initial states, shows in detail the behavior of the quantum annealer during reverse annealing. The procedure is experimentally demonstrated on three small test Ising models which were embedded in parallel on the D-Wave Advantage_system4.1. Analysis of the state transition mapping shows detailed characteristics of the reverse annealing process, including intermediate state transition paths, which are visually represented as state transition networks.

arXiv:2210.16513•Physical Review Research•Mar 31, 2023•3 citations
In a typical quantum annealing protocol, the system starts with a transverse field Hamiltonian that is gradually turned off and replaced by a longitudinal Ising Hamiltonian. The ground state of the Ising Hamiltonian encodes the solution to the computational problem of interest, and the state overlap with this ground state gives the success probability of the annealing protocol. The form of the annealing schedule can have a significant impact on the ground-state overlap at the end of the anneal, so precise control over these annealing schedules can be a powerful tool for increasing success probabilities of annealing protocols. Here we show how superconducting circuits, in particular capacitively shunted flux qubits, can be used to construct quantum annealing systems by providing tools for mapping circuit flux biases to Pauli coefficients. We use this mapping to find customized annealing schedules: appropriate circuit control biases that yield a desired annealing schedule, while accounting for the physical limitations of the circuitry. We then provide examples and proposals that utilize this capability to improve quantum annealing performance.
Abstract Quantum annealers require accurate control and optimized operation schemes to reduce noise levels, in order to eventually demonstrate a computational advantage over classical algorithms. We study a high coherence four-junction capacitively shunted flux qubit (CSFQ), using dispersive measurements to extract system parameters and model the device. Josephson junction asymmetry inherent to the device causes a deleterious nonlinear cross-talk when annealing the qubit. We implement a nonlinear annealing path to correct the asymmetry in situ, resulting in a substantial increase in the probability of the qubit being in the correct state given an applied flux bias. We also confirm the multi-level structure of our CSFQ circuit model by annealing it through small spectral gaps and observing quantum signatures of energy level crossings. Our results demonstrate an anneal-path correction scheme designed and implemented to improve control accuracy for high-coherence and high-control quantum annealers, which leads to an enhancement of success probability in annealing protocols.
Quantum annealing is a form of quantum computing that exploits quantum effects to probabilistically solve a specific, NP-hard problem: finding the ground state of a classical, Ising-model Hamiltonian. Because physical quantum annealers are already available, there exists the pressing question of how to program such systems. That is, how can one map a computational problem into the coefficients of an Ising-model Hamiltonian for solution by quantum-annealing hardware? In this article, we address that question primarily from a practical standpoint. We survey extant software tools intended for programming D-wave annealing-based quantum processors and examine the programming model and solution technique promoted by each tool in an attempt to showcase the variety of contemporary approaches to solving computationally challenging problems on an existing annealing-based quantum computer.
The applicability of quantum annealing to various problems can be improved by expressing the Hamiltonian using a circuit satisfiability problem. We investigate the detailed characteristics of the NOR/NAND functions of a superconducting quantum circuit, which are the basic building blocks to implementing various types of problem Hamiltonians. The circuit is composed of superconducting flux qubits with all-to-all connectivity, where direct magnetic couplers are utilized instead of the variable couplers in the conventional superconducting quantum circuit. This configuration provides efficient scalability because the problem Hamiltonian is implemented using fewer qubits. We present an experiment with a complete logic operation of NOR/NAND, in which the circuit produces results with a high probability of success for arbitrary combinations of inputs. The features of the quantum circuit agree qualitatively with the theory, especially the mechanism for an operation under external flux modulation. Moreover, by calibrating the bias conditions to compensate for the offset flux from the surrounding circuit, the quantum circuit quantitatively agrees with the theory. To achieve true quantum annealing, we discuss the effects of the reduction in electric noise in quantum annealing.
Preparing ground states of Hamiltonians is important in the condensed matter physics and the quantum chemistry. The interaction Hamiltonians typically contain not only diagonal but also off-diagonal elements. Although quantum annealing provides a way to prepare a ground state of a Hamiltonian, we can only use the Hamiltonian with Ising interaction by using currently available commercial quantum annealing devices. In this work, we propose a quantum annealing for the XXZ model, which contains both Ising interaction and energy-exchange interaction, by using inductively coupled superconducting flux qubits. The key idea is to use a recently proposed spin-lock quantum annealing where the qubits are driven by microwave fields. As long as the rotating wave approximation is valid, the inductive coupling between the superconducting flux qubits produces the desired Hamiltonian in the rotating frame, and we can use such an interaction for the quantum annealing while the microwave fields driving play a role of the transverse fields. To quantify the performance of our scheme, we implement numerical simulations, and show that we can prepare ground states of the two-dimensional Heisenberg model with a high fidelity.
The study of optimal control of quantum annealing by modulating the pace of evolution and by introducing a counterdiabatic potential has gained significant attention in recent times. In this work, we present a numerical approach based on genetic algorithms to improve the performance of quantum annealing, which evades the Landau-Zener transitions to navigate to the ground state of the final Hamiltonian with high probability. We optimize the annealing schedules starting from the polynomial ansatz by treating their coefficients as chromosomes of the genetic algorithm. We also explore shortcuts to adiabaticity by computing a practically feasible kkk-local optimal driving operator, showing that even for k=1k=1k=1 we achieve substantial improvement of the fidelity over the standard annealing solution. With these genetically optimized annealing schedules and/or optimal driving operators, we are able to perform quantum annealing in relatively short timescales and with higher fidelity compared to traditional approaches.
Quantum annealing is a novel type of analog computation that aims to use quantum-mechanical fluctuations to search for optimal solutions for Ising problems. Quantum annealing in the transverse field Ising model, implemented on D-Wave devices, works by applying a time-dependent transverse field, which puts all qubits into a uniform state of superposition, and then applying a Hamiltonian over time, which describes a user-programed Ising problem. We present a method that utilizes two control features of D-Wave quantum annealers, namely reverse annealing and an hhh-gain schedule, to quantify the susceptibility, or the distance, between two classical states of an Ising problem. The starting state is encoded using reverse annealing, and the second state is encoded on the linear terms of a problem Hamiltonian. An hhh-gain schedule is specified, which incrementally increases the strength of the linear terms, thus allowing a quantification of the hhh-gain strength required to transition the anneal into a specific state at the final measurement. Because of the nature of quantum annealing, the state tends towards global minima, and therefore we restrict the second classical state to a minimum solution of the given Ising problem. This susceptibility mapping, when enumerated across all initial states, shows in detail the behavior of the quantum annealer during reverse annealing. The procedure is experimentally demonstrated on three small test Ising models which were embedded in parallel on the D-Wave Advantage_system4.1. Analysis of the state transition mapping shows detailed characteristics of the reverse annealing process, including intermediate state transition paths, which are visually represented as state transition networks.