Microwave circulators play an important role in quantum technology based on superconducting circuits. The conventional circulator design, which employs ferrite materials, is bulky and involves strong magnetic fields, rendering it unsuitable for integration on superconducting chips. One promising design for an on-chip superconducting circulator is based on a passive Josephson-junction ring. In this paper, we consider two operational issues for such a device: circuit tuning and the effects of quasiparticle tunneling. We compute the scattering matrix using adiabatic elimination and derive the parameter constraints to achieve optimal circulation. We then numerically optimize the circulator performance over the full set of external control parameters, including gate voltages and flux bias, to demonstrate that this multidimensional optimization converges quickly to find optimal working points. We also consider the possibility of quasiparticle tunneling in the circulator ring and how it affects signal circulation. Our results form the basis for practical operation of a passive on-chip superconducting circulator made from a ring of Josephson junctions.
Microwave circulators play an important role in quantum technology based on superconducting circuits. The conventional circulator design, which employs ferrite materials, is bulky and involves strong magnetic fields, rendering it unsuitable for integration on superconducting chips. One promising design for an on-chip superconducting circulator is based on a passive Josephson-junction ring. In this paper, we consider two operational issues for such a device: circuit tuning and the effects of quasiparticle tunneling. We compute the scattering matrix using adiabatic elimination and derive the parameter constraints to achieve optimal circulation. We then numerically optimize the circulator performance over the full set of external control parameters, including gate voltages and flux bias, to demonstrate that this multidimensional optimization converges quickly to find optimal working points. We also consider the possibility of quasiparticle tunneling in the circulator ring and how it affects signal circulation. Our results form the basis for practical operation of a passive on-chip superconducting circulator made from a ring of Josephson junctions.
An on-chip microwave circulator that is compatible with superconducting devices is a key element for scale up of superconducting circuits. Previous approaches to integrating circulators on chip involve either external driving that requires extra microwave lines or a strong magnetic field that would compromise superconductivity. Here we report the first proof-of-principle realization of a passive on-chip circulator that is made from a superconducting loop interrupted by three notionally identical Josephson junctions and is tuned with only dc control fields. Our experimental results show evidence for nonreciprocal scattering, and excellent agreement with theoretical simulations. We also present a detailed analysis of quasiparticle tunneling in our device using a hidden Markov model. By reducing the junction asymmetry and utilizing the known methods of protection from quasiparticles, we anticipate that Josephson-loop circulator will become ubiquitous in superconducting circuits.
Building large-scale superconducting quantum circuits will require miniaturization and integration of supporting devices including microwave circulators, which are currently bulky, stand-alone components. Here, we report the measurement of microwave scattering from a ring of Josephson junctions, with dc-only control fields. We detect the effect of quasiparticle tunneling, and dynamically classify the system at its operating design point into different quasiparticle sectors. We optimize the device within one of the quasiparticle sectors, where we observe an unambiguous signature of nonreciprocal 3-port scattering within that sector. This enables operation as a circulator, and at the optimal circulation point, we observe on-resonance insertion loss of 2 dB, isolation of 14 dB, power reflectance of -11 dB, and a bandwidth of 200 MHz, averaged over the 3 input ports.
Building large-scale superconducting quantum circuits will require miniaturisation and integration of supporting devices including microwave circulators, which are currently bulky, stand-alone components. Here we report the realisation of a passive on-chip circulator which is made from a loop consisting of three tunnel-coupled superconducting islands, with DC-only control fields. We observe the effect of quasiparticle tunnelling, and we dynamically classify the system into different quasiparticle sectors. When tuned for circulation, the device exhibits strongly non-reciprocal 3-port scattering, with average on-resonance insertion loss of 2 dB, isolation of 14 dB, power reflectance of -11 dB, and a bandwidth of 200 MHz.
We present the design of a passive, on-chip microwave circulator based on a ring of superconducting tunnel junctions. We investigate two distinct physical realizations, based on Josephson junctions (JJs) or quantum phase slip elements (QPS), with microwave ports coupled either capacitively (JJ) or inductively (QPS) to the ring structure. A constant bias applied to the center of the ring provides an effective symmetry breaking field, and no microwave or rf bias is required. We show that this design offers high isolation, robustness against fabrication imperfections and bias fluctuations, and a bandwidth in excess of 500 MHz for realistic device parameters.
Ferrite-free circulators that are passive and readily integratable on a chip are highly sought-after in quantum technologies based on superconducting circuits. In our previous work, we implemented such a circulator using a three-Josephson-junction loop that exhibited unambiguous nonreciprocity and signal circulation, but required junction energies to be within 1 % of design values. This tolerance is tighter than standard junction fabrication methods provide, so we propose and demonstrate a design improvement that relaxes the required junction fabrication precision, allowing for higher device performance and fabrication yield. Specifically, we introduce large direct capacitive couplings between the waveguides, which based on the modeling we describe here, requires less stringent junction fabrication tolerance. We implement the design, and measure enhanced “circulation fidelity” above 97 % , with optimized on-resonance insertion loss of 0.2 dB, isolation of 18 dB, and power reflectance of − 15 dB , in good agreement with model calculations.
Nonreciprocal devices such as circulators function as one-way gates for microwave light, and thus are necessary components in superconducting quantum circuitry. However, today's circulators are bulky, lossy, and employ strong magnetic fields, and thus incompatible with scaling up. A proof-of-principle experiment demonstrates gyration in a Josephson circuit, in which microwave signals traveling in opposite directions acquire a 180\ifmmode^\circ\else\textdegree\fi{} phase difference. Inserting this gyrator into one arm of a Mach-Zehnder interferometer would enable a lossless, on-chip circulator with no magnetic materials, which could be used in a variety of applications for quantum information processing.