Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2101.11847 · Optics Express

High bandwidth laser frequency locking for wideband noise suppression

Mingyong Jing, Peng Zhang, Shaoxin Yuan, Linjie Zhang, Liantuan Xiao, Suotang Jia

Published Feb 20, 2021• 15 citations
arXivHTMLPDF

Abstract

Ultra-low frequency noise lasers have been widely used in laser-based experiments. Most narrow-linewidth lasers are implemented by actively suppressing their frequency noise through a frequency noise servo loop (FNSL). The loop bandwidths (LBW) of FNSLs are currently below megahertz, which is gradually tricky to meet application requirements, especially for wideband quantum sensing experiments. This article has experimentally implemented an FNSL with loop-delay-limited 3.5 MHz LBW, which is an order higher than the usual FNSLs. Using this FNSL, we achieved 70 dB laser frequency noise suppression over 100 kHz Fourier frequency range. This technology has broad applications in vast fields where wideband laser frequency noise suppression is inevitable.

DOI
10.1364/oe.419832

Related papers

Low phase noise cavity transmission self-injection locked diode laser system for atomic physics experiments

Ludwig Krinner, Kai Dietze, Lennart Pelzer +2 more

Lasers with high spectral purity are indispensable for optical clocks and for the coherent manipulation of atomic and molecular qubits in applications such as quantum computing and quantum simulation. While the stabilization of such lasers to a reference can provide a narrow linewidth, the widely used diode lasers exhibit fast phase noise that prevents high-fidelity qubit manipulation. In this paper, we demonstrate a self-injection locked diode laser system that utilizes a high-finesse cavity. This cavity not only provides a stable resonance frequency, it also acts as a low-pass filter for phase noise beyond the cavity linewidth of around 100 kHz, resulting in low phase noise from dc to the injection lock limit. We model the expected laser performance and benchmark it using a single trapped 40 Ca + -ion as a spectrum analyzer. We show that the fast phase noise of the laser at relevant Fourier frequencies of 100 kHz to >2 MHz is suppressed to a noise floor of between −110 dBc/Hz and −120 dBc/Hz, an improvement of 20 to 30 dB over state-of-the-art Pound-Drever-Hall-stabilized extended-cavity diode lasers. This strong suppression avoids incoherent (spurious) spin flips during manipulation of optical qubits and improves laser-driven gates when using diode lasers in applications involving quantum logic spectroscopy, quantum simulation, and quantum computation.

Optics Express•Apr 2, 2024•13 citations

A low phase noise cavity transmission self-injection locked laser system for atomic physics experiments

Ludwig Krinner, Kai Dietze, Lennart Pelzer +2 more

Lasers with high spectral purity are indispensable for optical clocks and coherent manipulation of atomic and molecular qubits for applications such as quantum computing and quantum simulation. Stabilisation of the laser to a reference can provide a narrow linewidth and high spectral purity. However, widely-used diode lasers exhibit fast phase noise that prevents high fidelity qubit manipulation. Here we demonstrate a self-injection locked diode laser system utilizing a medium finesse cavity. The cavity not only provides a stable resonance frequency, but at the same time acts as a low-pass filter for phase noise beyond the cavity linewidth of around 100 kHz, resulting in low phase noise from dc to the injection lock limit. We model the expected laser performance and benchmark it using a single trapped $^{40}$Ca$^{+}$-ion as a spectrum analyser. We show that the fast phase noise of the laser at relevant Fourier frequencies of 100 kHz to >2 MHz is suppressed to a noise floor of between -110 dBc/Hz and -120 dBc/Hz, an improvement of 20 to 30 dB over state-of-the-art Pound-Drever-Hall-stabilized extended-cavity diode lasers. This strong suppression avoids incoherent (spurious) spin flips during manipulation of optical qubits and improves laser-driven gates in using diode lasers with applications in quantum logic spectroscopy, quantum simulation and quantum computation.

arXiv:2311.03461•Nov 6, 2023•2 citations

Practical ultra-low frequency noise laser system for quantum sensors

Mingyong Jing, Shiyu Xue, Hao Zhang +3 more

The laser’s frequency noise is crucial to the sensitivity of quantum sensors. Two commonly used methods to suppress the laser’s frequency noise are locking the laser to an atomic transition by the lock-in technique or to an ultra-low thermal expansion (ULE) glass cavity by the PDH technique. The former cannot suppress rapidly changing frequency noise and hardly meets the needs; the latter has powerful performance but a heightened cost. The lack of high-performance and low-cost laser noise suppression methods dramatically limits the practical application of quantum sensors. This work demonstrates that, in many quantum sensing applications such as the Rydberg atomic superheterodyne receiver, by cascade locking the laser to both the atomic transition and a low-cost (LC) cavity, the same performance as locking to the ULE cavity can be achieved. This work is significant in promoting the practical application of quantum sensors.

EPJ Quantum Technology•Dec 1, 2024•6 citations

High-bandwidth Coherence Cloning using Optical-Phase-Locking Feedforward

Chen Jia, Zhen-Xing Hua, Yu-Xin Chao +1 more

Ultra-narrow-linewidth lasers with suppressed high-frequency phase noise are critical for quantum control and precision metrology. While optical phase locking (OPL) is the standard technique for cloning the coherence of such sources, its effectiveness is often limited at high frequencies by feedback latency. We present a robust feedforward architecture that overcomes this limitation by recycling and demodulating the existing master-slave beat signal to drive a single electro-optic modulator for near-instantaneous noise cancellation. This approach eliminates the extraneous sidebands and transmission losses typical of more complex modulators. Through active stabilization of the beat amplitude and demodulation phase, we demonstrate robust suppression exceeding 30 dB from 10 kHz to 10 MHz. This hardware-efficient framework is readily compatible with standard OPL setups, offering a scalable solution for high-fidelity coherent control.

quant-pharXiv:2604.02218•Apr 3, 2026•0 citations

Robust High-frequency Laser Phase Noise Suppression by Adaptive Pound-Drever-Hall Feedforward

Yu-Xin Chao, Zhen-Xing Hua, Xin-Hui Liang +4 more

Suppressing high-frequency laser phase noise, particularly at frequencies near and beyond typical feedback bandwidths of a few MHz, is a critical yet challenging task in many advanced applications. Feedforward-based methods generally outperform feedback in high-frequency range, but their performances are more susceptible to perturbations. In this work, we focus on the Pound-Drever-Hall (PDH)-feedforward method we demonstrated recently [Yu-Xin Chao et al., Optica 11(7), 945-950 (2024)] and analyze the factors that affect its long-term stability. By constructing a simple circuit allowing for adaptive control of the feedforward gain in response to power fluctuations of cavity transmission, we demonstrate a robust $\geq 40$ dB suppression of laser phase noise around 2 MHz and a noise suppression bandwidth up to 50 MHz. In comparison, when using normal PDH feedback, robust noise suppression of over 40 dB can only occur for frequencies below tens of kHz in most setups. Our findings may pave the way for general usage of PDH feedforward and allow for simple construction of low-noise lasers for precise quantum controls and precision metrology.

arXiv:2407.19642•Jul 29, 2024•0 citations

Practical ultra-low frequency noise laser system for quantum sensors

Xue, Shiyu, Mingyong Jing, Hao Zhang +3 more

The laser's frequency noise is crucial to the sensitivity of quantum sensors. Two commonly used methods to suppress the laser's frequency noise are locking the laser to an atomic transition by the lock-in technique or to an ultra-low thermal expansion (ULE) glass cavity by the PDH technique. The former cannot suppress rapidly changing frequency noise and hardly meets the needs; the latter has powerful performance but a heightened cost. The lack of high-performance and low-cost laser noise suppression methods dramatically limits the practical application of quantum sensors. This work demonstrates that, in many quantum sensing applications such as the Rydberg atomic superheterodyne receiver, by cascade locking the laser to both the atomic transition and a low-cost (LC) cavity, the same performance as locking to the ULE cavity can be achieved. This work is significant in promoting the practical application of quantum sensors.

arXiv:2403.12405•Mar 19, 2024•0 citations
Ultra-low frequency noise lasers have been widely used in laser-based experiments. Most narrow-linewidth lasers are implemented by actively suppressing their frequency noise through a frequency noise servo loop (FNSL). The loop bandwidths (LBW) of FNSLs are currently below megahertz, which is gradually tricky to meet application requirements, especially for wideband quantum sensing experiments. This article has experimentally implemented an FNSL with loop-delay-limited 3.5 MHz LBW, which is an order higher than the usual FNSLs. Using this FNSL, we achieved 70 dB laser frequency noise suppression over 100 kHz Fourier frequency range. This technology has broad applications in vast fields where wideband laser frequency noise suppression is inevitable.
Lasers with high spectral purity are indispensable for optical clocks and for the coherent manipulation of atomic and molecular qubits in applications such as quantum computing and quantum simulation. While the stabilization of such lasers to a reference can provide a narrow linewidth, the widely used diode lasers exhibit fast phase noise that prevents high-fidelity qubit manipulation. In this paper, we demonstrate a self-injection locked diode laser system that utilizes a high-finesse cavity. This cavity not only provides a stable resonance frequency, it also acts as a low-pass filter for phase noise beyond the cavity linewidth of around 100 kHz, resulting in low phase noise from dc to the injection lock limit. We model the expected laser performance and benchmark it using a single trapped 40 Ca + -ion as a spectrum analyzer. We show that the fast phase noise of the laser at relevant Fourier frequencies of 100 kHz to >2 MHz is suppressed to a noise floor of between −110 dBc/Hz and −120 dBc/Hz, an improvement of 20 to 30 dB over state-of-the-art Pound-Drever-Hall-stabilized extended-cavity diode lasers. This strong suppression avoids incoherent (spurious) spin flips during manipulation of optical qubits and improves laser-driven gates when using diode lasers in applications involving quantum logic spectroscopy, quantum simulation, and quantum computation.
Lasers with high spectral purity are indispensable for optical clocks and coherent manipulation of atomic and molecular qubits for applications such as quantum computing and quantum simulation. Stabilisation of the laser to a reference can provide a narrow linewidth and high spectral purity. However, widely-used diode lasers exhibit fast phase noise that prevents high fidelity qubit manipulation. Here we demonstrate a self-injection locked diode laser system utilizing a medium finesse cavity. The cavity not only provides a stable resonance frequency, but at the same time acts as a low-pass filter for phase noise beyond the cavity linewidth of around 100 kHz, resulting in low phase noise from dc to the injection lock limit. We model the expected laser performance and benchmark it using a single trapped 40^{40}40Ca+^{+}+-ion as a spectrum analyser. We show that the fast phase noise of the laser at relevant Fourier frequencies of 100 kHz to >2 MHz is suppressed to a noise floor of between -110 dBc/Hz and -120 dBc/Hz, an improvement of 20 to 30 dB over state-of-the-art Pound-Drever-Hall-stabilized extended-cavity diode lasers. This strong suppression avoids incoherent (spurious) spin flips during manipulation of optical qubits and improves laser-driven gates in using diode lasers with applications in quantum logic spectroscopy, quantum simulation and quantum computation.
The laser’s frequency noise is crucial to the sensitivity of quantum sensors. Two commonly used methods to suppress the laser’s frequency noise are locking the laser to an atomic transition by the lock-in technique or to an ultra-low thermal expansion (ULE) glass cavity by the PDH technique. The former cannot suppress rapidly changing frequency noise and hardly meets the needs; the latter has powerful performance but a heightened cost. The lack of high-performance and low-cost laser noise suppression methods dramatically limits the practical application of quantum sensors. This work demonstrates that, in many quantum sensing applications such as the Rydberg atomic superheterodyne receiver, by cascade locking the laser to both the atomic transition and a low-cost (LC) cavity, the same performance as locking to the ULE cavity can be achieved. This work is significant in promoting the practical application of quantum sensors.
Ultra-narrow-linewidth lasers with suppressed high-frequency phase noise are critical for quantum control and precision metrology. While optical phase locking (OPL) is the standard technique for cloning the coherence of such sources, its effectiveness is often limited at high frequencies by feedback latency. We present a robust feedforward architecture that overcomes this limitation by recycling and demodulating the existing master-slave beat signal to drive a single electro-optic modulator for near-instantaneous noise cancellation. This approach eliminates the extraneous sidebands and transmission losses typical of more complex modulators. Through active stabilization of the beat amplitude and demodulation phase, we demonstrate robust suppression exceeding 30 dB from 10 kHz to 10 MHz. This hardware-efficient framework is readily compatible with standard OPL setups, offering a scalable solution for high-fidelity coherent control.
Suppressing high-frequency laser phase noise, particularly at frequencies near and beyond typical feedback bandwidths of a few MHz, is a critical yet challenging task in many advanced applications. Feedforward-based methods generally outperform feedback in high-frequency range, but their performances are more susceptible to perturbations. In this work, we focus on the Pound-Drever-Hall (PDH)-feedforward method we demonstrated recently [Yu-Xin Chao et al., Optica 11(7), 945-950 (2024)] and analyze the factors that affect its long-term stability. By constructing a simple circuit allowing for adaptive control of the feedforward gain in response to power fluctuations of cavity transmission, we demonstrate a robust ≥40\geq 40≥40 dB suppression of laser phase noise around 2 MHz and a noise suppression bandwidth up to 50 MHz. In comparison, when using normal PDH feedback, robust noise suppression of over 40 dB can only occur for frequencies below tens of kHz in most setups. Our findings may pave the way for general usage of PDH feedforward and allow for simple construction of low-noise lasers for precise quantum controls and precision metrology.
The laser's frequency noise is crucial to the sensitivity of quantum sensors. Two commonly used methods to suppress the laser's frequency noise are locking the laser to an atomic transition by the lock-in technique or to an ultra-low thermal expansion (ULE) glass cavity by the PDH technique. The former cannot suppress rapidly changing frequency noise and hardly meets the needs; the latter has powerful performance but a heightened cost. The lack of high-performance and low-cost laser noise suppression methods dramatically limits the practical application of quantum sensors. This work demonstrates that, in many quantum sensing applications such as the Rydberg atomic superheterodyne receiver, by cascade locking the laser to both the atomic transition and a low-cost (LC) cavity, the same performance as locking to the ULE cavity can be achieved. This work is significant in promoting the practical application of quantum sensors.