Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2101.10735

A Compact Fermion to Qubit Mapping Part 2: Alternative Lattice Geometries

Charles Derby, Joel Klassen

Published Jan 26, 2021• 12 citations
arXivHTMLPDF

Abstract

In recent work [arXiv:2003.06939v2] a novel fermion to qubit mapping -- called the compact encoding -- was introduced which outperforms all previous local mappings in both the qubit to mode ratio, and the locality of mapped operators. There the encoding was demonstrated for square and hexagonal lattices. Here we present an extension of that work by illustrating how to apply the compact encoding to other regular lattices. We give constructions for variants of the compact encoding on all regular tilings with maximum degree 4. These constructions yield edge operators with Pauli weight at most 3 and use fewer than 1.67 qubits per fermionic mode. Additionally we demonstrate how the compact encoding may be applied to a cubic lattice, yielding edge operators with Pauli weight no greater than 4 and using approximately 2.5 qubits per mode. In order to properly analyse the compact encoding on these lattices a more general group theoretic framework is required, which we elaborate upon in this work. We expect this framework to find use in the design of fermion to qubit mappings more generally.

DOI
10.48550/arxiv.2101.10735

Related papers

Operator locality in the quantum simulation of fermionic models

Vojtěch Havlíček, Matthias Troyer, James Daniel Whitfield

Simulating fermionic lattice models with qubits requires mapping fermionic degrees of freedom to qubits. The simplest method for this task, the Jordan-Wigner transformation, yields strings of Pauli operators acting on an extensive number of qubits. This overhead can be a hindrance to implementation of qubit-based quantum simulators, especially in the analog context. Here we thus review and analyze alternative fermion-to-qubit mappings, including the two approaches by Bravyi and Kitaev and the auxiliary fermion transformation. The Bravyi-Kitaev transform is reformulated in terms of a classical data structure and generalized to achieve a further locality improvement for local fermionic models on a rectangular lattice. We conclude that the most compact encoding of the fermionic operators can be done using ancilla qubits with the auxiliary fermion scheme. Without introducing ancillas, a variant of the Bravyi-Kitaev transform provides the most compact fermion-to-qubit mapping for Hubbard-like models.

arXiv:1701.07072•Physical Review A•Mar 29, 2017•96 citations

Compact fermion to qubit mappings

Charles Derby, Joel Klassen, Johannes Bausch +1 more

Mappings between fermions and qubits are valuable constructions in physics. To date only a handful exist. In addition to revealing dualities between fermionic and spin systems, such mappings are indispensable in any quantum simulation of fermionic physics on quantum computers. The number of qubits required per fermionic mode, and the locality of mapped fermionic operators strongly impact the cost of such simulations. We present a fermion to qubit mapping that outperforms all previous local mappings in both the qubit to mode ratio and the locality of mapped operators. In addition to these practically useful features, the mapping bears an elegant relationship to the toric code, which we discuss. Finally, we consider the error mitigating properties of the mapping---which encodes fermionic states into the code space of a stabilizer code. Although there is an implicit tradeoff between low weight representations of local fermionic operators, and high distance code spaces, we argue that fermionic encodings with low-weight representations of local fermionic operators can still exhibit error mitigating properties which can serve a similar role to that played by high code distances. In particular, when undetectable errors correspond to ``natural'' fermionic noise. We illustrate this point explicitly both for this encoding and the Verstraete-Cirac encoding.

arXiv:2003.06939•Physical review. B./Physical review. B•Jul 8, 2021•100 citations

Optimal Fermion-Qubit Mappings via Quadratic Assignment

Mitchell Chiew, Cameron Ibrahim, Ilya Safro +1 more

Simulation of fermionic systems is one of the most promising applications of quantum computers. It spans problems in quantum chemistry, high-energy physics and condensed matter. Underpinning the core steps of any quantum simulation algorithm, fermion-qubit mappings translate the fermionic interactions to the operators and states of quantum computers. This translation is highly non-trivial: a burgeoning supply of fermion-qubit mappings has arisen over the past twenty years to address the limited resources of early quantum technology. Previous literature has presented a dichotomy between ancillafree fermion-qubit mappings, which minimise qubit count, and local encodings, which minimise gate complexity. We present two computational approaches to the construction of general mappings while working with a limited number of qubits, striking a balance between the low-qubit and low-gate demands of present quantum technology. The first method frames the order of fermionic labels as an instance of the quadratic assignment problem to minimize the total and maximum Pauli weights in a problem Hamiltonian. We compare the orderoptimized performance of several common ancilla-free mappings on systems of size up to 225 fermionic modes. The second method is a computational approach to incrementally add ancilla qubits to Jordan-Wigner transformations and further reduce the Pauli weights. By adding up to 10 ancilla qubits, we were able to reduce the total Pauli weight by as much as 67 % in JordanWigner transformations of fermionic systems with up to 64 modes, outperforming the previous state-of-the-art ancilla-free mappings. Reproducibility: source code and data are available at https://github.com/cameton/QCE_QubitAssignment

arXiv:2504.21636•IEEE International Conference on Quantum Computing and Engineering (QCE)•Aug 30, 2025•1 citation

Discovering optimal fermion-qubit mappings through algorithmic enumeration

Mitchell Chiew, Sergii Strelchuk

Simulating fermionic systems on a quantum computer requires a high-performing mapping of fermionic states to qubits. A characteristic of an efficient mapping is its ability to translate local fermionic interactions into local qubit interactions, leading to easy-to-simulate qubit Hamiltonians. All fermion-qubit mappings must use a numbering scheme for the fermionic modes in order for translation to qubit operations. We make a distinction between the unordered labelling of fermions and the ordered labelling of the qubits. This separation shines light on a new way to design fermion-qubit mappings by making use of the enumeration scheme for the fermionic modes. The purpose of this paper is to demonstrate that this concept permits notions of fermion-qubit mappings that are optimal with regard to any cost function one might choose. Our main example is the minimisation of the average number of Pauli matrices in the Jordan-Wigner transformations of Hamiltonians for fermions interacting in square lattice arrangements. In choosing the best ordering of fermionic modes for the Jordan-Wigner transformation, and unlike other popular modifications, our prescription does not cost additional resources such as ancilla qubits.We demonstrate how Mitchison and Durbin's enumeration pattern minimises the average Pauli weight of Jordan-Wigner transformations of systems interacting in square lattices. This leads to qubit Hamiltonians consisting of terms with average Pauli weights 13.9% shorter than previously known. By adding only two ancilla qubits we introduce a new class of fermion-qubit mappings, and reduce the average Pauli weight of Hamiltonian terms by 37.9% compared to previous methods. For n -mode fermionic systems in cellular arrangements, we find enumeration patterns which result in n1/4 improvement in average Pauli weight over naïve schemes.

arXiv:2110.12792•Quantum•Oct 18, 2023•16 citations

Equivalence between Fermion-to-Qubit Mappings in two Spatial Dimensions

Yu-An Chen, Yijia Xu

We argue that all locality-preserving mappings between fermionic observables and Pauli matrices on a two-dimensional lattice can be generated from the exact bosonization in Chen et al. [Ann.Phys.(N.Y) 393, 234 (2018)], whose gauge constraints project onto the subspace of the toric code with emergent fermions.Starting from the exact bosonization and applying Clifford finite-depth generalized local unitary transformation, we can achieve all possible fermion-to-qubit mappings (up to the re-pairing of Majorana fermions).In particular, we discover a new supercompact encoding using 1.25 qubits per fermion on the square lattice.We prove the existence of finite-depth quantum circuits to obtain fermion-to-qubit mappings with qubit-fermion ratios r = 1 + 1/2k for positive integers k, utilizing the trivialness of quantum cellular automata in two spatial dimensions.Also, we provide direct constructions of fermion-to-qubit mappings with ratios arbitrarily close to 1.When the ratio reaches 1, the fermion-to-qubit mapping reduces to the one-dimensional Jordan-Wigner transformation along a certain path in the two-dimensional lattice.Finally, we explicitly demonstrate that the Bravyi-Kitaev superfast simulation, the Verstraete-Cirac auxiliary method, Kitaev's exactly solved model, the Majorana loop stabilizer codes, and the compact fermion-to-qubit mapping can all be obtained from the exact bosonization.

arXiv:2201.05153•PRX Quantum•Mar 13, 2023•37 citations

On the locality of qubit encodings of local fermionic modes

Tommaso Guaita

Known mappings that encode fermionic modes into a bosonic qubit system are non-local transformations. In this paper we establish that this must necessarily be the case, if the locality graph is complex enough (for example for regular 2 d lattices). In particular we show that, in case of exact encodings, a fully local mapping is possible if and only if the locality graph is a tree. If instead we allow ourselves to also consider operators that only act fermionically on a subspace of the qubit Hilbert space, then we show that this subspace must be composed of long range entangled states, if the locality graph contains at least two overlapping cycles. This implies, for instance, that on 2 d lattices there exist states that are of low depth from the fermionic point of view, while in any encoding require a circuit of depth at least proportional to the system size to be prepared.

arXiv:2401.10077•Quantum•Feb 25, 2025•3 citations
In recent work [arXiv:2003.06939v2] a novel fermion to qubit mapping -- called the compact encoding -- was introduced which outperforms all previous local mappings in both the qubit to mode ratio, and the locality of mapped operators. There the encoding was demonstrated for square and hexagonal lattices. Here we present an extension of that work by illustrating how to apply the compact encoding to other regular lattices. We give constructions for variants of the compact encoding on all regular tilings with maximum degree 4. These constructions yield edge operators with Pauli weight at most 3 and use fewer than 1.67 qubits per fermionic mode. Additionally we demonstrate how the compact encoding may be applied to a cubic lattice, yielding edge operators with Pauli weight no greater than 4 and using approximately 2.5 qubits per mode. In order to properly analyse the compact encoding on these lattices a more general group theoretic framework is required, which we elaborate upon in this work. We expect this framework to find use in the design of fermion to qubit mappings more generally.
Simulating fermionic lattice models with qubits requires mapping fermionic degrees of freedom to qubits. The simplest method for this task, the Jordan-Wigner transformation, yields strings of Pauli operators acting on an extensive number of qubits. This overhead can be a hindrance to implementation of qubit-based quantum simulators, especially in the analog context. Here we thus review and analyze alternative fermion-to-qubit mappings, including the two approaches by Bravyi and Kitaev and the auxiliary fermion transformation. The Bravyi-Kitaev transform is reformulated in terms of a classical data structure and generalized to achieve a further locality improvement for local fermionic models on a rectangular lattice. We conclude that the most compact encoding of the fermionic operators can be done using ancilla qubits with the auxiliary fermion scheme. Without introducing ancillas, a variant of the Bravyi-Kitaev transform provides the most compact fermion-to-qubit mapping for Hubbard-like models.
Mappings between fermions and qubits are valuable constructions in physics. To date only a handful exist. In addition to revealing dualities between fermionic and spin systems, such mappings are indispensable in any quantum simulation of fermionic physics on quantum computers. The number of qubits required per fermionic mode, and the locality of mapped fermionic operators strongly impact the cost of such simulations. We present a fermion to qubit mapping that outperforms all previous local mappings in both the qubit to mode ratio and the locality of mapped operators. In addition to these practically useful features, the mapping bears an elegant relationship to the toric code, which we discuss. Finally, we consider the error mitigating properties of the mapping---which encodes fermionic states into the code space of a stabilizer code. Although there is an implicit tradeoff between low weight representations of local fermionic operators, and high distance code spaces, we argue that fermionic encodings with low-weight representations of local fermionic operators can still exhibit error mitigating properties which can serve a similar role to that played by high code distances. In particular, when undetectable errors correspond to ``natural'' fermionic noise. We illustrate this point explicitly both for this encoding and the Verstraete-Cirac encoding.
Simulation of fermionic systems is one of the most promising applications of quantum computers. It spans problems in quantum chemistry, high-energy physics and condensed matter. Underpinning the core steps of any quantum simulation algorithm, fermion-qubit mappings translate the fermionic interactions to the operators and states of quantum computers. This translation is highly non-trivial: a burgeoning supply of fermion-qubit mappings has arisen over the past twenty years to address the limited resources of early quantum technology. Previous literature has presented a dichotomy between ancillafree fermion-qubit mappings, which minimise qubit count, and local encodings, which minimise gate complexity. We present two computational approaches to the construction of general mappings while working with a limited number of qubits, striking a balance between the low-qubit and low-gate demands of present quantum technology. The first method frames the order of fermionic labels as an instance of the quadratic assignment problem to minimize the total and maximum Pauli weights in a problem Hamiltonian. We compare the orderoptimized performance of several common ancilla-free mappings on systems of size up to 225 fermionic modes. The second method is a computational approach to incrementally add ancilla qubits to Jordan-Wigner transformations and further reduce the Pauli weights. By adding up to 10 ancilla qubits, we were able to reduce the total Pauli weight by as much as 67 % in JordanWigner transformations of fermionic systems with up to 64 modes, outperforming the previous state-of-the-art ancilla-free mappings. Reproducibility: source code and data are available at https://github.com/cameton/QCE_QubitAssignment
Simulating fermionic systems on a quantum computer requires a high-performing mapping of fermionic states to qubits. A characteristic of an efficient mapping is its ability to translate local fermionic interactions into local qubit interactions, leading to easy-to-simulate qubit Hamiltonians. All fermion-qubit mappings must use a numbering scheme for the fermionic modes in order for translation to qubit operations. We make a distinction between the unordered labelling of fermions and the ordered labelling of the qubits. This separation shines light on a new way to design fermion-qubit mappings by making use of the enumeration scheme for the fermionic modes. The purpose of this paper is to demonstrate that this concept permits notions of fermion-qubit mappings that are optimal with regard to any cost function one might choose. Our main example is the minimisation of the average number of Pauli matrices in the Jordan-Wigner transformations of Hamiltonians for fermions interacting in square lattice arrangements. In choosing the best ordering of fermionic modes for the Jordan-Wigner transformation, and unlike other popular modifications, our prescription does not cost additional resources such as ancilla qubits.We demonstrate how Mitchison and Durbin's enumeration pattern minimises the average Pauli weight of Jordan-Wigner transformations of systems interacting in square lattices. This leads to qubit Hamiltonians consisting of terms with average Pauli weights 13.9% shorter than previously known. By adding only two ancilla qubits we introduce a new class of fermion-qubit mappings, and reduce the average Pauli weight of Hamiltonian terms by 37.9% compared to previous methods. For n -mode fermionic systems in cellular arrangements, we find enumeration patterns which result in n1/4 improvement in average Pauli weight over naïve schemes.
We argue that all locality-preserving mappings between fermionic observables and Pauli matrices on a two-dimensional lattice can be generated from the exact bosonization in Chen et al. [Ann.Phys.(N.Y) 393, 234 (2018)], whose gauge constraints project onto the subspace of the toric code with emergent fermions.Starting from the exact bosonization and applying Clifford finite-depth generalized local unitary transformation, we can achieve all possible fermion-to-qubit mappings (up to the re-pairing of Majorana fermions).In particular, we discover a new supercompact encoding using 1.25 qubits per fermion on the square lattice.We prove the existence of finite-depth quantum circuits to obtain fermion-to-qubit mappings with qubit-fermion ratios r = 1 + 1/2k for positive integers k, utilizing the trivialness of quantum cellular automata in two spatial dimensions.Also, we provide direct constructions of fermion-to-qubit mappings with ratios arbitrarily close to 1.When the ratio reaches 1, the fermion-to-qubit mapping reduces to the one-dimensional Jordan-Wigner transformation along a certain path in the two-dimensional lattice.Finally, we explicitly demonstrate that the Bravyi-Kitaev superfast simulation, the Verstraete-Cirac auxiliary method, Kitaev's exactly solved model, the Majorana loop stabilizer codes, and the compact fermion-to-qubit mapping can all be obtained from the exact bosonization.
Known mappings that encode fermionic modes into a bosonic qubit system are non-local transformations. In this paper we establish that this must necessarily be the case, if the locality graph is complex enough (for example for regular 2 d lattices). In particular we show that, in case of exact encodings, a fully local mapping is possible if and only if the locality graph is a tree. If instead we allow ourselves to also consider operators that only act fermionically on a subspace of the qubit Hilbert space, then we show that this subspace must be composed of long range entangled states, if the locality graph contains at least two overlapping cycles. This implies, for instance, that on 2 d lattices there exist states that are of low depth from the fermionic point of view, while in any encoding require a circuit of depth at least proportional to the system size to be prepared.