Tunable Coupling Architecture for Fixed-Frequency Transmon Superconducting Qubits
J. Stehlik, D. M. Zajac, Devin Underwood, Timothy Phung, J. Blair, Santino D. Carnevale, D. Klaus, George Keefe, April Carniol, Muir Kumph, Matthias Steffen, Oliver Dial
Implementation of high-fidelity 2-qubit operations is a key ingredient for scalable quantum error correction. In superconducting qubit architectures, tunable buses have been explored as a means to higher-fidelity gates. However, these buses introduce new pathways for leakage. Here we present a modified tunable bus architecture appropriate for fixed-frequency qubits in which the adiabaticity restrictions on gate speed are reduced. We characterize this coupler on a range of 2-qubit devices, achieving a maximum gate fidelity of 99.85%. We further show the calibration is stable over one day.
Implementation of high-fidelity 2-qubit operations is a key ingredient for scalable quantum error correction. In superconducting qubit architectures, tunable buses have been explored as a means to higher-fidelity gates. However, these buses introduce new pathways for leakage. Here we present a modified tunable bus architecture appropriate for fixed-frequency qubits in which the adiabaticity restrictions on gate speed are reduced. We characterize this coupler on a range of 2-qubit devices, achieving a maximum gate fidelity of 99.85%. We further show the calibration is stable over one day.
In recent years, several architectures have been proposed for implementing two-qubit operations on fluxonium superconducting qubits. A particularly promising approach, which was demonstrated experimentally by Refs. [1,2], employs a transmon superconducting qubit as a tunable coupler between the fluxonium qubits. These experiments have shown that the transmon coupler enables fast, high-fidelity two-qubit operations while suppressing unwanted ZZ crosstalk between the fluxonium qubits. In this work, we numerically study the scalability of this architecture. We find that, when trivially scaling this architecture, crosstalk from spectator qubits limits the gate fidelity to below 90%. We show that these spectator errors can be reduced to below 10−4 by reducing the coupling strength and by dynamically tuning transmons that are not used for a two-qubit operation to an off position. We further investigate the resilience of the operation to direct capacitive coupling between the transmon couplers and to microwave crosstalk.
Achieving high-fidelity single-qubit gates, two-qubit gates, and qubit readout is critical for building scalable, error-corrected quantum computers. However, device parameters that enhance one operation often degrade the others, making simultaneous optimization challenging. Here, we demonstrate that careful tuning of qubit-coupler coupling strengths in a superconducting circuit with two transmon qubits coupled via a tunable coupler enables high-fidelity single- and two-qubit gates, without compromising readout performance. Furthermore, we introduce a new calibration protocol for diabatic controlled- Z gates, phased-averaged leakage error amplification (PALEA), which enables efficient suppression of coherent gate errors and leakage to noncomputational states. Using PALEA in combination with careful tuning of qubit-coupler coupling strengths, we achieve a 40 h-averaged CZ gate fidelity of 99.93 %, simultaneous single-qubit gate fidelities of 99.98 %, and readout fidelities over 99.94 % in a single device. Our results demonstrate a viable path toward scaling up superconducting quantum processors while maintaining consistently high gate and readout fidelities.
In the pursuit of scalable superconducting quantum computing, tunable couplers have emerged as a pivotal component, offering the flexibility required for complex quantum operations of high performance. In most current architectures of superconducting quantum chips, such couplers are not equipped with dedicated readout circuits to reduce complexity in both design and operation. However, this strategy poses challenges in precise characterization, calibration, and control of the couplers. In this work, we develop a hardware-efficient and robust technique based on adiabatic control to address this issue. The critical ingredient of this technique is adiabatic swap operation between a tunable coupler and nearby qubits. Using this technique, we have characterized and calibrated tunable couplers in our chips and achieved straightforward and precise control over these couplers. For example, we have demonstrated the calibration and correction of the flux distortion of couplers. In addition, we have also expanded this technique to tune the dispersive shift between a frequency-fixed qubit and its readout resonator over a wide range.
In recent years, several architectures have been proposed for implementing two-qubit operations on fluxonium superconducting qubits. A particularly promising approach, which was demonstrated experimentally by Refs. [L. Ding , S. Singh ], employs a transmon superconducting qubit as a tunable coupler between the fluxonium qubits. These experiments have shown that the transmon coupler enables fast, high-fidelity two-qubit operations while suppressing unwanted Z Z crosstalk between the fluxonium qubits. In this work, we numerically study the scalability of this architecture. We find that, when trivially scaling this architecture, crosstalk from spectator qubits limits the gate fidelity to below 90%. We show that these spectator errors can be reduced to below 10 − 4 by reducing the coupling strength and by dynamically tuning transmons that are not used for a two-qubit operation to an off position. We further investigate the resilience of the operation to direct capacitive coupling between the transmon couplers and to microwave crosstalk.
Tunable couplers in superconducting quantum computers have enabled fast and accurate two-qubit gates, with reported high fidelities over 99% in various architectures and gate-implementation schemes. However, there are few tunable couplers whose performance in multiqubit systems is clarified, except for the most widely used one: single-transmon coupler (STC). Achieving similar accuracy to isolated two-qubit systems remains challenging due to various undesirable couplings but is necessary for scalability. In this work, we numerically analyze a system of three fixed-frequency qubits coupled via two double-transmon couplers (DTCs) where nearest-neighbor qubits are highly detuned and also next-nearest-neighbor ones are nearly resonant. The DTC is a recently proposed tunable coupler, which consists of two fixed-frequency transmons coupled through a common loop with an additional Josephson junction. We find that the DTC cannot only reduce undesired residual couplings sufficiently, as well as in isolated two-qubit systems, but also enables implementations of 30-ns CZ gates and individual and simultaneous 10-ns π / 2 pulses with fidelities over 99.99%. For comparison, we also investigate the system where the DTCs are replaced by the STCs. The results show that the DTC outperforms the STC in terms of both residual coupling suppression and gate accuracy in the above systems. From these results, we expect that the DTC architecture is promising for realizing high-performance, scalable superconducting quantum computers. Published by the American Physical Society 2024
High-quality two-qubit gate operations are crucial for scalable quantum information processing. Often, the gate fidelity is compromised when the system becomes more integrated. Therefore, a low-error-rate, easy-to-scale two-qubit gate scheme is highly desirable. Here, we experimentally demonstrate a new two-qubit gate scheme that exploits fixed-frequency qubits and a tunable coupler in a superconducting quantum circuit. The scheme requires less control lines, reduces cross talk effect, and simplifies calibration procedures, yet produces a controlled-Z gate in 30 ns with a high fidelity of 99.5%, derived from the interleaved randomized benchmarking method. Error analysis shows that gate errors are mostly coherence limited. Our demonstration paves the way for large-scale implementation of high-fidelity quantum operations.