By harnessing quantum superposition and entanglement, remarkable progress has sprouted over the past three decades from different areas of research in communication computation and simulation. To further improve the processing ability of microwave pho-tonics, here, we have demonstrated a quantum microwave photonic processing system using a low jitter superconducting nanowire single photon detector (SNSPD) and a time-correlated single-photon counting (TCSPC) module. This method uniquely combines extreme optical sensitivity, down to a single-photon level (below -100 dBm), and wide processing bandwidth, twice higher than the transmission bandwidth of the cable. Moreover, benefitted from the trigger, the system can selectively process the desired RF signal and attenuates the other in-tense noise and undesired RF components even the power is 15dB greater than the desired signal power. Using this method we show microwave phase shifting and frequency filtering for the desired RF signal on the single-photon level. Besides its applications in space and under-water communications and testing and qualification of pre-packaged photonic modulators and detectors. This RF signal processing capability at the single-photon level can lead to significant development in the high-speed quantum processing method.
By harnessing quantum superposition and entanglement, remarkable progress has sprouted over the past three decades from different areas of research in communication computation and simulation. To further improve the processing ability of microwave pho-tonics, here, we have demonstrated a quantum microwave photonic processing system using a low jitter superconducting nanowire single photon detector (SNSPD) and a time-correlated single-photon counting (TCSPC) module. This method uniquely combines extreme optical sensitivity, down to a single-photon level (below -100 dBm), and wide processing bandwidth, twice higher than the transmission bandwidth of the cable. Moreover, benefitted from the trigger, the system can selectively process the desired RF signal and attenuates the other in-tense noise and undesired RF components even the power is 15dB greater than the desired signal power. Using this method we show microwave phase shifting and frequency filtering for the desired RF signal on the single-photon level. Besides its applications in space and under-water communications and testing and qualification of pre-packaged photonic modulators and detectors. This RF signal processing capability at the single-photon level can lead to significant development in the high-speed quantum processing method.
With the rapid development of microwave photonics technology, high-speed processing and ultra-weak signal detection capability have become the main bottlenecks in many applications. Thanks to the ultra-weak signal detection capability and the extremely low timing jitter properties of single-photon detectors, the combination of single-photon detection and classical microwave photonics technology may provide a solution to break the above bottlenecks. In this paper, we first report a novel concept of single-photon microwave photonics (SP-MWP), a SP-MWP signal processing system with phase shifting and frequency filtering functionalities is demonstrated based on a superconducting nanowire single photon detector (SNSPD) and a successive time-correlated single photon counting (TCSPC) module. Experimental results show that an ultrahigh optical sensitivity down to -100 dBm has been achieved, and the signal processing bandwidth is only limited by the timing jitter of single-photon detectors. In the meantime, the proposed system demonstrates an ultrahigh anti-interference capability, only the signal which is phase locked by the trigger signal in TCSPC can be extracted from the detected signals combining with noise and strong interference. The proposed SP-MWP concept paves a way to a novel interdisciplinary field of microwave photonics and quantum mechanism, named by quantum microwave photonics.
As the main branch of microwave photonics, radio-over-fiber technology provides high bandwidth, low-loss, and long-distance propagation capability, facilitating wide applications ranging from telecommunication to wireless networks. With ultrashort pulses as the optical carrier, a large capacity is further endowed. However, the wide bandwidth of ultrashort pulses results in the severe vulnerability of high-frequency radio frequency (RF) signals to fiber dispersion. With a time-energy entangled biphoton source as the optical carrier combined with the single-photon detection technique, a quantum microwave photonics method in radio-over-fiber systems is proposed and demonstrated experimentally. The results show that it not only realizes unprecedented nonlocal RF signal modulation with strong resistance to the dispersion but also provides an alternative mechanism to distill the RF signal out from the dispersion effectively. Furthermore, the spurious-free dynamic ranges of the nonlocally modulated and distilled RF signals have been significantly improved. With the ultra-weak detection and the high-speed processing advantages endowed by the low-timing-jitter single-photon detection, the quantum microwave photonics method opens new possibilities in modern communication and networks.
With the rapid development of microwave photonics, which has expanded to numerous applications of commercial importance, eliminating the emerging bottlenecks becomes of vital importance. For example, as the main branch of microwave photonics, radio-over-fiber technology provides high bandwidth, low-loss, and long-distance propagation capability, facilitating wide applications ranging from telecommunication to wireless networks. With ultrashort pulses as the optical carrier, huge capacity is further endowed. However, the wide bandwidth of ultrashort pulses results in the severe vulnerability of high-frequency RF signals to fiber dispersion. With a time-energy entangled biphoton source as the optical carrier and combined with the single-photon detection technique, a quantum microwave photonics method is proposed and demonstrated experimentally. The results show that it not only realizes unprecedented nonlocal RF signal modulation with strong resistance to the dispersion associated with ultrashort pulse carriers but provides an alternative mechanism to effectively distill the RF signal out from the dispersion. Furthermore, the spurious-free dynamic range of both the nonlocally modulated and distilled RF signals has been significantly improved. With the ultra-weak detection and high-speed processing advantages endowed by the low-timing-jitter single-photon detection, the quantum microwave photonics method opens up new possibilities in modern communication and networks.
Quantum microwave photonics (QMWP) is an innovative approach that combines energy–time entangled biphoton sources as the optical carrier with time-correlated single-photon detection for high-speed radio frequency (RF) signal recovery. This groundbreaking method offers unique advantages, such as nonlocal RF signal encoding and robust resistance to dispersion-induced frequency fading. We explore the versatility of processing the quantum microwave photonic signal by utilizing coincidence window selection on the biphoton coincidence distribution. The demonstration includes finely tunable RF phase shifting, flexible multitap transversal filtering (with up to 14 taps), and photonically implemented RF mixing, leveraging the nonlocal RF mapping characteristic of QMWP. These accomplishments significantly enhance the capability of microwave photonic systems in processing ultraweak signals, opening up new possibilities for various applications.
Quantum microwave photonics (QMWP) is an innovative approach that combines energy-time entangled biphoton sources as the optical carrier with time-correlated single-photon detection for high-speed RF signal recovery. This groundbreaking method offers unique advantages such as nonlocal RF signal encoding and robust resistance to dispersion-induced frequency fading. This paper explores the versatility of processing the quantum microwave photonic signal by utilizing coincidence window selection on the biphoton coincidence distribution. The demonstration includes finely-tunable RF phase shifting, flexible multi-tap transversal filtering (with up to 15 taps), and photonically implemented RF mixing, leveraging the nonlocal RF mapping characteristic of QMWP. These accomplishments significantly enhance the capability of microwave photonic systems in processing ultra-weak signals, opening up new possibilities for various applications.
Superconducting Nanowire Single Photon Detectors (SNSPD) have set leading performance benchmarks in terms of detection efficiency, low noise operation, speed, and timing accuracy. Besides scaling up the numbers of individually addressable nanowire detector channels, integration with nanophotonic functionalities as well as optical and electrical multiplexing will be key to advance single photon counting applications, such as quantum key distribution, optical quantum information processing and simulations of sampling problems. Here we show how integration of SNSPDs with nanophotonic circuit components gives rise to novel use cases. We combine highperformance waveguide-integrated SNSPDs with nano-electromechanical phase-shifters, high speed electro-optic modulators, sub-wavelength grating structures, directional coupler networks, on-chip delay lines and highly efficient and broadband 3D-interconnects to optical fibers, achieving crucial active and passive functionalities for integrated quantum photonics. We showcase the capabilities and practical relevance of photonic integrated SNSPD solutions for the example of high-rate quantum key distribution receivers.