arXiv:2011.10564 · Physical review. B./Physical review. B

Free-mode removal and mode decoupling for simulating general superconducting quantum circuits

Dawei Ding, Hsiang‐Sheng Ku, Yaoyun Shi, Hui‐Hai Zhao

Published May 3, 2021• 10 citations

Abstract

Superconducting quantum circuits is one of the leading candidates for a universal quantum computer. Designing novel qubit and multiqubit superconducting circuits requires the ability to simulate and analyze the properties of a general circuit. In particular, going outside the transmon approach, we cannot make assumptions on anharmonicity, thus precluding blackbox quantization approaches and necessitating the formal circuit quantization approach. We consider and solve two issues involved in simulating general superconducting circuits. One of the issues is the handling of free modes in the circuit, that is, circuit modes with no potential term in the Hamiltonian. Another issue is circuit size, namely, the challenge of simulating strongly coupled multimode circuits. The main mathematical tool we use to address these issues is the linear canonical transformation in the setting of quantum mechanics. We address the first issue by giving a provably correct algorithm for removing free modes by performing a linear canonical transformation to completely decouple the free modes from other circuit modes. We address the second by giving a series of different linear canonical transformations to reduce intermode couplings, thereby reducing the problem to the weakly coupled case and greatly mitigating the overhead for classical simulation. We benchmark our decoupling methods by applying them to the circuit of two inductively coupled fluxonium qubits, obtaining several orders of magnitude reduction in the size of the Hilbert space that needs to be simulated.

DOI: 10.1103/physrevb.103.174501

Related papers

Circuit-QED for Multi-Loop Fluxonium-Type Qubits

Larisa-Milena Pioraş-Ţimbolmaş, Levente Máthé, Liviu P. Zârbo

Fluxonium qubits, designed to mitigate charge noise and enhance anharmonicity, are among the most promising superconducting platforms for quantum computing. To understand and exploit their quantum properties and design novel fluxonium-based architectures with improved functionalities, these systems require an accurate Hamiltonian formulation to capture their energy level structure and quantum dynamics. This work presents a systematic method for constructing the Hamiltonian for multi-loop circuits that partitions the system into a set of uncoupled harmonic oscillators and a coupled anharmonic part originating from the Josephson circuit elements, allowing clear identification of independent modes and isolating the nonlinearity in the Josephson terms. While demonstrated for fluxonium-type multi-loop circuits, this method can be generalized to other superconducting qubit architectures within the broader context of circuit QED, making it a versatile tool for exploring different circuit configurations. Our systematic and flexible modeling approach forms the theoretical basis for the qubit measurement and control experiments validating multi-loop fluxonium architectures.

PhotonicsApr 25, 20251 citation

Quantization of inductively shunted superconducting circuits

W. Clarke Smith, Angela Kou, Uri Vool +4 more

We present a method for calculating the energy levels of superconducting circuits that contain highly anharmonic, inductively shunted modes with arbitrarily strong coupling. Our method starts by calculating the normal modes of the linearized circuit and proceeds with numerical diagonalization in this basis. As an example, we analyze the Hamiltonian of a fluxonium qubit inductively coupled to a readout resonator. While elementary, this simple example is nontrivial because it cannot be efficiently treated by the method known as ``black-box quantization,'' numerical diagonalization in the bare harmonic oscillator basis, or perturbation theory. Calculated spectra are compared to measured spectroscopy data, demonstrating excellent quantitative agreement between theory and experiment.

arXiv:1602.01793Physical review. B./Physical review. BOct 14, 201653 citations

Effective Hamiltonians for interacting superconducting qubits: local basis reduction and the Schrieffer–Wolff transformation

Consani, G, Paul A. Warburton

An open question in designing superconducting quantum circuits is how best to reduce the full circuit Hamiltonian which describes their dynamics to an effective two-level qubit Hamiltonian which is appropriate for manipulation of quantum information. Despite advances in numerical methods to simulate the spectral properties of multi-element superconducting circuits (Yurke B and Denker J S 1984 Phys. Rev. A 29 1419, Reiter F and Sørensen A S 2012 Phys. Rev. A 85 032111 and Amin M H et al 2012 Phys. Rev. A 86 052314), the literature lacks a consistent and effective method of determining the effective qubit Hamiltonian. Here we address this problem by introducing a novel local basis reduction method. This method does not require any ad hoc assumption on the structure of the Hamiltonian such as its linear response to applied fields. We numerically benchmark the local basis reduction method against other Hamiltonian reduction methods in the literature and report specific examples of superconducting qubits, including the capacitively-shunted flux qubit, where the standard reduction approaches fail. By combining the local basis reduction method with the Schrieffer–Wolff transformation we further extend its applicability to systems of interacting qubits and use it to extract both non-stoquastic two-qubit Hamiltonians and three-local interaction terms in three-qubit Hamiltonians.

May 1, 202015 citations

Effective Hamiltonians for interacting superconducting qubits: local basis reduction and the Schrieffer–Wolff transformation

Gioele Consani, Paul A. Warburton

Abstract An open question in designing superconducting quantum circuits is how best to reduce the full circuit Hamiltonian which describes their dynamics to an effective two-level qubit Hamiltonian which is appropriate for manipulation of quantum information. Despite advances in numerical methods to simulate the spectral properties of multi-element superconducting circuits (Yurke B and Denker J S 1984 Phys. Rev. A 29 1419, Reiter F and Sørensen A S 2012 Phys. Rev. A 85 032111 and Amin M H et al 2012 Phys. Rev. A 86 052314), the literature lacks a consistent and effective method of determining the effective qubit Hamiltonian. Here we address this problem by introducing a novel local basis reduction method . This method does not require any ad hoc assumption on the structure of the Hamiltonian such as its linear response to applied fields. We numerically benchmark the local basis reduction method against other Hamiltonian reduction methods in the literature and report specific examples of superconducting qubits, including the capacitively-shunted flux qubit, where the standard reduction approaches fail. By combining the local basis reduction method with the Schrieffer–Wolff transformation we further extend its applicability to systems of interacting qubits and use it to extract both non-stoquastic two-qubit Hamiltonians and three-local interaction terms in three-qubit Hamiltonians.

arXiv:1912.00464New Journal of PhysicsMar 26, 202020 citations

Efficient numerical simulation of complex Josephson quantum circuits

Andrew J. Kerman

Building on the established methods for superconducting circuit quantization, we present a new theoretical framework for approximate numerical simulation of Josephson quantum circuits. Simulations based on this framework provide access to a degree of complexity and circuit size heretofore inaccessible to quantitative analysis, including fundamentally new kinds of superconducting quantum devices. This capability is made possible by two improvements over previous methods: first, physically-motivated choices for the canonical circuit modes and physical basis states which allow a highly-efficient matrix representation; and second, an iterative method in which subsystems are diagonalized separately and then coupled together, at increasing size scales with each iteration, allowing diagonalization of Hamiltonians in extremely large Hilbert spaces to be approximated using a sequence of diagonalizations in much smaller spaces.

arXiv:2010.14929Oct 28, 20208 citations

Superconducting quantum circuits theory and application

Xiu–Hao Deng

Superconducting quantum circuit models are widely used to understand superconducting devices. This thesis consists of four studies wherein the superconducting quantum circuit is used to illustrate challenges related to quantum information encoding and processing, quantum simulation, quantum signal detection and amplification.The existence of scalar Aharanov-Bohm phase has been a controversial topic for decades. Scalar AB phase, defined as time integral of electric potential, gives rises to an extra phase factor in wavefunction. We proposed a superconducting quantum Faraday cage to detect temporal interference effect as a consequence of scalar AB phase. Using the superconducting quantum circuit model, the physical system is solved and resulting AB effect is predicted. Further discussion in this chapter shows that treating the experimental apparatus quantum mechanically, spatial scalar AB effect, proposed by Aharanov-Bohm, can't be observed. Either a decoherent interference apparatus is used to observe spatial scalar AB effect, or a quantum Faraday cage is used to observe temporal scalar AB effect.The second study involves protecting a quantum system from losing coherence, which is crucial to any practical quantum computation scheme. We present a theory to encode any qubit, especially superconducting qubits, into a universal quantum degeneracy point (UQDP) where low frequency noise is suppressed significantly. Numerical simulations for superconducting charge qubit using experimental parameters show that its coherence time is prolong by two orders of magnitude using our universal degeneracy point approach. With this improvement, a set of universal quantum gates can be performed at high fidelity without losing too much quantum coherence.Starting in 2004, the use of circuit QED has enabled the manipulation of superconducting qubits with photons. We applied quantum optical approach to model coupled resonators and obtained a four-wave mixing toolbox to operate photons states. The model and toolbox are engineered with a superconducting quantum circuit where two superconducting resonators are coupled via the UQDP circuit. Using fourth order perturbation theory one can realize a complete set of quantum operations between these two photon modes. This helps open a new field to treat photon modes as qubits. Additional, a three-wave mixing scheme using phase qubits permits one to engineer the coupling Hamiltonian using a phase qubit as a tunable coupler.Along with Feynman's idea using quantum to simulate quantum, superconducting quantum simulators have been studied intensively recently. Taking the advantage of mesoscopic size of superconducting circuit and local tunability, we came out the idea to simulate quantum phase transition due to disorder. Our first paper was to propose a superconducting quantum simulator of Bose-Hubbard model to do site-wise manipulation and observe Mott-insulator to superfluid phase transition. The side-band cooling of an array of superconducting resonators is solved after the paper was published. In light of the developed technology in manipulating quantum information with superconducting circuit, one can couple other quantum oscillator system to superconducting resonators in order manipulation of its quantum states or parametric amplification of weak quantum signal. A theory that works for different coupling schemes has been studied in chapter 5. This will be a platform for further research.

Jan 1, 20150 citations