Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2011.07741 · Physical Review A

Hyperentanglement-enhanced quantum illumination

Ashwith Varadaraj Prabhu, Baladitya Suri, C. M. Chandrashekar

Published May 17, 2021• 20 citations
arXivHTMLPDF

Abstract

In quantum illumination, the signal mode of light, entangled with an idler mode, is dispatched towards a suspected object bathed in thermal noise, and the returning mode, along with the stored idler mode, is measured to determine the presence or absence of the object. In this process, entanglement is destroyed but its benefits in the form of classical correlations and enlarged Hilbert space survive. Here, we propose the use of a probe state hyperentangled in two degrees of freedom, polarization and frequency, to achieve a significant 12-dB performance improvement in the error probability exponent over the best-known quantum illumination procedure in the low-noise regime. We present a simple receiver model using four optical parametric amplifiers (OPAs) that exploits hyperentanglement in the probe state to match the performance of the feed-forward sum-frequency generator (FF-SFG) receiver in the high-noise regime. By replacing each OPA in the proposed model with a FF-SFG receiver, a further 3-dB improvement in the performance of a lone FF-SFG receiver can be seen.

DOI
10.1103/physreva.103.052608

Related papers

Hyperentanglement-enhanced quantum illumination receiver

Ashwith Varadaraj Prabhu, Baladitya Suri, C. M. Chandrashekar

In quantum illumination, the signal mode of light, entangled with an idler mode, is dispatched towards a suspected object bathed in thermal noise and the returning mode, along with the stored idler mode, is measured to determine the presence or absence of the object. In this process, entanglement is destroyed but its benefits in the form of classical correlations and enlarged Hilbert space survive. Here, we propose the use of probe state hyperentangled in two degrees of freedom - polarization and frequency, to achieve a significant 12dB performance improvement in error probability exponent over the best known quantum illumination procedure in the low noise regime. We present a simple receiver model using four optical parametric amplifiers (OPA) that exploits hyperentanglement in the probe state to match the performance of the feed-forward sum-frequency generator (FF-SFG) receiver in the high noise regime. By replacing each OPA in the proposed model with a FF-SFG receiver, further 3dB improvement in the performance of a lone FF-SFG receiver can be seen.

•Nov 16, 2020•0 citations

Quantum Illumination with Gaussian States

Si-Hui Tan, Baris I. Erkmen, Vittorio Giovannetti +5 more

An optical transmitter irradiates a target region containing a bright thermal-noise bath in which a low-reflectivity object might be embedded. The light received from this region is used to decide whether the object is present or absent. The performance achieved using a coherent-state transmitter is compared with that of a quantum-illumination transmitter, i.e., one that employs the signal beam obtained from spontaneous parametric down-conversion. By making the optimum joint measurement on the light received from the target region together with the retained spontaneous parametric down-conversion idler beam, the quantum-illumination system realizes a 6 dB advantage in the error-probability exponent over the optimum reception coherent-state system. This advantage accrues despite there being no entanglement between the light collected from the target region and the retained idler beam.

arXiv:0810.0534•Physical Review Letters•Dec 18, 2008•691 citations

Quantum illumination for enhanced detection of Rayleigh-fading targets

Quntao Zhuang, Zheshen Zhang, Jeffrey H. Shapiro

Quantum illumination (QI) is an entanglement-enhanced sensing system whose performance advantage over a comparable classical system survives its usage in an entanglement-breaking scenario plagued by loss and noise. In particular, QI's error-probability exponent for discriminating between equally likely hypotheses of target absence or presence is 6 dB higher than that of the optimum classical system using the same transmitted power. This performance advantage, however, presumes that the target return, when present, has known amplitude and phase, a situation that seldom occurs in light detection and ranging (lidar) applications. At lidar wavelengths, most target surfaces are sufficiently rough that their returns are speckled, i.e., they have Rayleigh-distributed amplitudes and uniformly distributed phases. QI's optical parametric amplifier receiver---which affords a 3 dB better-than-classical error-probability exponent for a return with known amplitude and phase---fails to offer any performance gain for Rayleigh-fading targets. We show that the sum-frequency generation receiver [Zhuang et al., Phys. Rev. Lett. 118, 040801 (2017)]---whose error-probability exponent for a nonfading target achieves QI's full 6 dB advantage over optimum classical operation---outperforms the classical system for Rayleigh-fading targets. In this case, QI's advantage is subexponential: its error probability is lower than the classical system's by a factor of $1/ln(M\overline{\ensuremath{\kappa}}{N}_{S}/{N}_{B})$, when $M\overline{\ensuremath{\kappa}}{N}_{S}/{N}_{B}\ensuremath{\gg}1$, with $M\ensuremath{\gg}1$ being the QI transmitter's time-bandwidth product, ${N}_{S}\ensuremath{\ll}1$ its brightness, $\overline{\ensuremath{\kappa}}$ the target return's average intensity, and ${N}_{B}$ the background light's brightness.

arXiv:1706.05561•Physical Review A•Aug 15, 2017•51 citations

Optimum Mixed-State Discrimination for Noisy Entanglement-Enhanced Sensing

Quntao Zhuang, Zheshen Zhang, Jeffrey H. Shapiro

Quantum metrology utilizes nonclassical resources, such as entanglement or squeezed light, to realize sensors whose performance exceeds that afforded by classical-state systems. Environmental loss and noise, however, easily destroy nonclassical resources and, thus, nullify the performance advantages of most quantum-enhanced sensors. Quantum illumination (QI) is different. It is a robust entanglement-enhanced sensing scheme whose 6 dB performance advantage over a coherent-state sensor of the same average transmitted photon number survives the initial entanglement's eradication by loss and noise. Unfortunately, an implementation of the optimum quantum receiver that would reap QI's full performance advantage has remained elusive, owing to its having to deal with a huge number of very noisy optical modes. We show how sum-frequency generation (SFG) can be fruitfully applied to optimum multimode Gaussian-mixed-state discrimination. Applied to QI, our analysis and numerical evaluations demonstrate that our SFG receiver saturates QI's quantum Chernoff bound. Moreover, augmenting our SFG receiver with a feedforward (FF) mechanism pushes its performance to the Helstrom bound in the limit of low signal brightness. The FF-SFG receiver, thus, opens the door to optimum quantum-enhanced imaging, radar detection, state and channel tomography, and communication in practical Gaussian-state situations.

arXiv:1609.01968•Physical Review Letters•Jan 27, 2017•195 citations

Gaussian-state quantum-illumination receivers for target detection

Saikat Guha, Baris I. Erkmen

The signal half of an entangled twin beam, generated using spontaneous parametric downconversion, interrogates a region of space that is suspected of containing a target and has high loss and high (entanglement-breaking) background noise. A joint measurement is performed on the returned light and the idler beam that was retained at the transmitter. An optimal quantum receiver, whose implementation is not yet known, was shown to achieve 6 dB gain in the error-probability exponent relative to that achieved with a single coherent-state (classical) laser transmitter and the optimum receiver. We present two structured optical receivers that achieve up to 3 dB gain in the error exponent over that attained with the classical sensor. These are designs of quantum-optical sensors for target detection, which can be readily implemented in a proof-of-concept experiment, that appreciably outperform the best classical sensor in the low-signal-brightness, high-loss, and high-noise operating regime.

arXiv:0911.0950•Physical Review A•Nov 10, 2009•266 citations

Quantum Estimation Methods for Quantum Illumination

Mikel Sanz, U. Las Heras, Juan José García‐Ripoll +2 more

Quantum illumination consists in shining quantum light on a target region immersed in a bright thermal bath with the aim of detecting the presence of a possible low-reflective object. If the signal is entangled with the receiver, then a suitable choice of the measurement offers a gain with respect to the optimal classical protocol employing coherent states. Here, we tackle this detection problem by using quantum estimation techniques to measure the reflectivity parameter of the object, showing an enhancement in the signal-to-noise ratio up to 3 dB with respect to the classical case when implementing only local measurements. Our approach employs the quantum Fisher information to provide an upper bound for the error probability, supplies the concrete estimator saturating the bound, and extends the quantum illumination protocol to non-Gaussian states. As an example, we show how Schrödinger's cat states may be used for quantum illumination.

arXiv:1606.06656•Physical Review Letters•Feb 17, 2017•119 citations
In quantum illumination, the signal mode of light, entangled with an idler mode, is dispatched towards a suspected object bathed in thermal noise, and the returning mode, along with the stored idler mode, is measured to determine the presence or absence of the object. In this process, entanglement is destroyed but its benefits in the form of classical correlations and enlarged Hilbert space survive. Here, we propose the use of a probe state hyperentangled in two degrees of freedom, polarization and frequency, to achieve a significant 12-dB performance improvement in the error probability exponent over the best-known quantum illumination procedure in the low-noise regime. We present a simple receiver model using four optical parametric amplifiers (OPAs) that exploits hyperentanglement in the probe state to match the performance of the feed-forward sum-frequency generator (FF-SFG) receiver in the high-noise regime. By replacing each OPA in the proposed model with a FF-SFG receiver, a further 3-dB improvement in the performance of a lone FF-SFG receiver can be seen.
In quantum illumination, the signal mode of light, entangled with an idler mode, is dispatched towards a suspected object bathed in thermal noise and the returning mode, along with the stored idler mode, is measured to determine the presence or absence of the object. In this process, entanglement is destroyed but its benefits in the form of classical correlations and enlarged Hilbert space survive. Here, we propose the use of probe state hyperentangled in two degrees of freedom - polarization and frequency, to achieve a significant 12dB performance improvement in error probability exponent over the best known quantum illumination procedure in the low noise regime. We present a simple receiver model using four optical parametric amplifiers (OPA) that exploits hyperentanglement in the probe state to match the performance of the feed-forward sum-frequency generator (FF-SFG) receiver in the high noise regime. By replacing each OPA in the proposed model with a FF-SFG receiver, further 3dB improvement in the performance of a lone FF-SFG receiver can be seen.
An optical transmitter irradiates a target region containing a bright thermal-noise bath in which a low-reflectivity object might be embedded. The light received from this region is used to decide whether the object is present or absent. The performance achieved using a coherent-state transmitter is compared with that of a quantum-illumination transmitter, i.e., one that employs the signal beam obtained from spontaneous parametric down-conversion. By making the optimum joint measurement on the light received from the target region together with the retained spontaneous parametric down-conversion idler beam, the quantum-illumination system realizes a 6 dB advantage in the error-probability exponent over the optimum reception coherent-state system. This advantage accrues despite there being no entanglement between the light collected from the target region and the retained idler beam.
Quantum illumination (QI) is an entanglement-enhanced sensing system whose performance advantage over a comparable classical system survives its usage in an entanglement-breaking scenario plagued by loss and noise. In particular, QI's error-probability exponent for discriminating between equally likely hypotheses of target absence or presence is 6 dB higher than that of the optimum classical system using the same transmitted power. This performance advantage, however, presumes that the target return, when present, has known amplitude and phase, a situation that seldom occurs in light detection and ranging (lidar) applications. At lidar wavelengths, most target surfaces are sufficiently rough that their returns are speckled, i.e., they have Rayleigh-distributed amplitudes and uniformly distributed phases. QI's optical parametric amplifier receiver---which affords a 3 dB better-than-classical error-probability exponent for a return with known amplitude and phase---fails to offer any performance gain for Rayleigh-fading targets. We show that the sum-frequency generation receiver [Zhuang et al., Phys. Rev. Lett. 118, 040801 (2017)]---whose error-probability exponent for a nonfading target achieves QI's full 6 dB advantage over optimum classical operation---outperforms the classical system for Rayleigh-fading targets. In this case, QI's advantage is subexponential: its error probability is lower than the classical system's by a factor of $1/ln(M\overline{\ensuremath{\kappa}}{N}_{S}/{N}_{B})$, when $M\overline{\ensuremath{\kappa}}{N}_{S}/{N}_{B}\ensuremath{\gg}1$, with $M\ensuremath{\gg}1$ being the QI transmitter's time-bandwidth product, ${N}_{S}\ensuremath{\ll}1$ its brightness, $\overline{\ensuremath{\kappa}}$ the target return's average intensity, and NB{N}_{B}NB​ the background light's brightness.
Quantum metrology utilizes nonclassical resources, such as entanglement or squeezed light, to realize sensors whose performance exceeds that afforded by classical-state systems. Environmental loss and noise, however, easily destroy nonclassical resources and, thus, nullify the performance advantages of most quantum-enhanced sensors. Quantum illumination (QI) is different. It is a robust entanglement-enhanced sensing scheme whose 6 dB performance advantage over a coherent-state sensor of the same average transmitted photon number survives the initial entanglement's eradication by loss and noise. Unfortunately, an implementation of the optimum quantum receiver that would reap QI's full performance advantage has remained elusive, owing to its having to deal with a huge number of very noisy optical modes. We show how sum-frequency generation (SFG) can be fruitfully applied to optimum multimode Gaussian-mixed-state discrimination. Applied to QI, our analysis and numerical evaluations demonstrate that our SFG receiver saturates QI's quantum Chernoff bound. Moreover, augmenting our SFG receiver with a feedforward (FF) mechanism pushes its performance to the Helstrom bound in the limit of low signal brightness. The FF-SFG receiver, thus, opens the door to optimum quantum-enhanced imaging, radar detection, state and channel tomography, and communication in practical Gaussian-state situations.
The signal half of an entangled twin beam, generated using spontaneous parametric downconversion, interrogates a region of space that is suspected of containing a target and has high loss and high (entanglement-breaking) background noise. A joint measurement is performed on the returned light and the idler beam that was retained at the transmitter. An optimal quantum receiver, whose implementation is not yet known, was shown to achieve 6 dB gain in the error-probability exponent relative to that achieved with a single coherent-state (classical) laser transmitter and the optimum receiver. We present two structured optical receivers that achieve up to 3 dB gain in the error exponent over that attained with the classical sensor. These are designs of quantum-optical sensors for target detection, which can be readily implemented in a proof-of-concept experiment, that appreciably outperform the best classical sensor in the low-signal-brightness, high-loss, and high-noise operating regime.
Quantum illumination consists in shining quantum light on a target region immersed in a bright thermal bath with the aim of detecting the presence of a possible low-reflective object. If the signal is entangled with the receiver, then a suitable choice of the measurement offers a gain with respect to the optimal classical protocol employing coherent states. Here, we tackle this detection problem by using quantum estimation techniques to measure the reflectivity parameter of the object, showing an enhancement in the signal-to-noise ratio up to 3 dB with respect to the classical case when implementing only local measurements. Our approach employs the quantum Fisher information to provide an upper bound for the error probability, supplies the concrete estimator saturating the bound, and extends the quantum illumination protocol to non-Gaussian states. As an example, we show how Schrödinger's cat states may be used for quantum illumination.