Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2011.07050 · Physical Review Letters

Demonstration of a High-Fidelity cnot Gate for Fixed-Frequency Transmons with Engineered ZZ Suppression

Abhinav Kandala, Ken Xuan Wei, Srikanth J. Srinivasan, Easwar Magesan, Santino D. Carnevale, George Keefe, D. Klaus, Oliver Dial, David C. McKay

Published Sep 22, 2021• 160 citations
arXivHTMLPDF

Abstract

Improving two-qubit gate performance and suppressing cross talk are major, but often competing, challenges to achieving scalable quantum computation. In particular, increasing the coupling to realize faster gates has been intrinsically linked to enhanced cross talk due to unwanted two-qubit terms in the Hamiltonian. Here, we demonstrate a novel coupling architecture for transmon qubits that circumvents the standard relationship between desired and undesired interaction rates. Using two fixed frequency coupling elements to tune the dressed level spacings, we demonstrate an intrinsic suppression of the static ZZ while maintaining large effective coupling rates. Our architecture reveals no observable degradation of qubit coherence (T_{1},T_{2}>100 μs) and, over a factor of 6 improvement in the ratio of desired to undesired coupling. Using the cross-resonance interaction, we demonstrate a 180 ns single-pulse controlled not (cnot) gate, and measure a cnot fidelity of 99.77(2)% from interleaved randomized benchmarking.

DOI
10.1103/physrevlett.127.130501

Related papers

Fast ZZ-Free Entangling Gates for Superconducting Qubits Assisted by a Driven Resonator

Ziwen Huang, Tae-Yoon Kim, Tanay Roy +4 more

Engineering high-fidelity two-qubit gates is an indispensable step toward practical quantum computing. For superconducting quantum platforms, one important setback is the stray interaction between qubits, which causes significant coherent errors. For transmon qubits, protocols for mitigating such errors usually involve fine-tuning the hardware parameters or introducing usually noisy flux-tunable couplers. In this work, we propose a simple scheme to cancel these stray interactions. The coupler used for such cancellation is a driven high-coherence resonator, where the amplitude and frequency of the drive serve as control knobs. Through the resonator-induced-phase (RIP) interaction, the static ZZ coupling can be entirely neutralized. We numerically show that such a scheme can enable short and high-fidelity entangling gates, including cross-resonance CNOT gates within 40 ns and adiabatic CZ gates within 140 ns. Our architecture is not only ZZ free but also contains no extra noisy components, such that it preserves the coherence times of fixed-frequency transmon qubits. With the state-of-the-art coherence times, the error of our cross-resonance CNOT gate can be reduced to below 1e-4.

arXiv:2311.01332•Nov 2, 2023•0 citations

Fast Z Z -free entangling gates for superconducting qubits assisted by a driven resonator

Ziwen Huang, Tae-Yoon Kim, Tanay Roy +4 more

Engineering high-fidelity two-qubit gates is an indispensable step toward practical quantum computing. For superconducting quantum platforms, one important setback is the stray interaction between qubits, which causes significant coherent errors. For transmon qubits, protocols for mitigating such errors usually involve fine-tuning the hardware parameters or introducing usually noisy flux-tunable couplers. In this work, we propose a simple scheme to cancel these stray interactions. The coupler used for such cancelation is a driven high-coherence resonator, where the amplitude and frequency of the drive serve as control knobs. Through the resonator-induced-phase interaction, the static $ZZ$ coupling can be entirely neutralized. We numerically show that such a scheme can enable short and high-fidelity entangling gates, including cross-resonance controlled-not (cnot) gates within 40 ns and adiabatic controlled-$Z$ gates within 140 ns. Our architecture is not only $ZZ$-free, but also contains no extra noisy components, such that it preserves the coherence times of fixed-frequency transmon qubits. With the state-of-the-art coherence times, the error of our cross-resonance cnot gate can be reduced to below ${10}^{\ensuremath{-}4}$.

Physical Review Applied•Sep 4, 2024•6 citations

A universal quantum gate set for transmon qubits with strong ZZ interactions

Junling Long, Tongyu Zhao, Mustafa Bal +13 more

High-fidelity single- and two-qubit gates are essential building blocks for a fault-tolerant quantum computer. While there has been much progress in suppressing single-qubit gate errors in superconducting qubit systems, two-qubit gates still suffer from error rates that are orders of magnitude higher. One limiting factor is the residual ZZ-interaction, which originates from a coupling between computational states and higher-energy states. While this interaction is usually viewed as a nuisance, here we experimentally demonstrate that it can be exploited to produce a universal set of fast single- and two-qubit entangling gates in a coupled transmon qubit system. To implement arbitrary single-qubit rotations, we design a new protocol called the two-axis gate that is based on a three-part composite pulse. It rotates a single qubit independently of the state of the other qubit despite the strong ZZ-coupling. We achieve single-qubit gate fidelities as high as 99.1% from randomized benchmarking measurements. We then demonstrate both a CZ gate and a CNOT gate. Because the system has a strong ZZ-interaction, a CZ gate can be achieved by letting the system freely evolve for a gate time $t_g=53.8$ ns. To design the CNOT gate, we utilize an analytical microwave pulse shape based on the SWIPHT protocol for realizing fast, low-leakage gates. We obtain fidelities of 94.6% and 97.8% for the CNOT and CZ gates respectively from quantum progress tomography.

arXiv:2103.12305•Mar 23, 2021•7 citations

Lattice patch structure for fixed-frequency transmon quantum computer with high-fidelity CNOT gates

Chanpyo Kim, Jeongsoo Kang, Younghun Kwon

Superconducting transmon processors represent a leading platform for large-scale quantum computing due to their high gate fidelities and scalability. However, conventional qubit-coupler-qubit (QCQ) architectures face critical physical and structural bottlenecks, notably frequency crowding [spectator qubit collisions] during system scaling and inefficient mapping onto the standard surface code.To overcome these limitations, we propose a novel lattice-patch architecture that couples four fixed-frequency transmons to a single fixed-frequency coupler.This design enhances qubit connectivity and maps directly onto the surface-code lattice unit [plaquette], thereby minimizing the compilation overhead associated with logical qubit implementation. Furthermore, utilizing an entirely fixed-frequency design intrinsically eliminates susceptibility to external flux noise, ensuring robust operational stability.Multi-level numerical simulations demonstrate CNOT gate fidelities exceeding 0.98 across all six connectivity directions within the patch. Nevertheless, the complex interaction network of the four-qubit architecture induces unintended residual phase accumulation during cross-resonance driving. This parasitic effect necessitates precise calibration, achievable via virtual $R_z$ gates [software phase updates]. Ultimately, our results establish the lattice-patch architecture as an efficient, robust building block for future fault-tolerant quantum computers.

quant-pharXiv:2606.27017•Jun 26, 2026•0 citations

Mitigation of quantum crosstalk in cross-resonance-based qubit architectures

Peng Zhao

The cross-resonance gate (cr gate) architecture that exploits fixed-frequency transmon qubits and fixed couplings is a leading candidate for quantum computing. Nonetheless, without the tunability of qubit parameters such as qubit frequencies and couplings, gate operations can be limited by the presence of quantum crosstalk arising from the always-on couplings. When increasing system sizes, this can become even more serious, considering frequency collisions caused by fabrication uncertainties. Here, we introduce a cr-gate-based transmon architecture with passive mitigation of both quantum crosstalk and frequency collisions. Assuming typical parameters, we show that $ZZ$ crosstalk can be suppressed while maintaining $XY$ couplings to support fast, high-fidelity cr gates. The architecture also allows one to go beyond the existing literature by extending the operating regions in which fast, high-fidelity cr gates are possible, thus alleviating the frequency-collision issue. To examine the practicality, we analyze the cr-gate performance in multiqubit lattices and provide an intuitive model for identifying and mitigating the dominant source of error. For the state-of-the-art precision in setting frequencies, we further investigate its impact on the gates. We find that $ZZ$ crosstalk and frequency collisions can be largely mitigated for neighboring qubits, while interactions beyond near-neighbor qubits can introduce new frequency collisions. As the strength is typically at the submegahertz level, adding weak off-resonant drives to selectively shift qubits can mitigate the collisions. This work could be useful for suppressing quantum crosstalk and improving gate fidelities in large-scale quantum processors based on fixed-frequency qubits and fixed couplings.

arXiv:2307.09995•Physical Review Applied•Nov 15, 2023•13 citations

Hardware-Efficient Microwave-Activated Tunable Coupling between Superconducting Qubits

Bradley K. Mitchell, Ravi Naik, Alexis Morvan +7 more

Generating high-fidelity, tunable entanglement between qubits is crucial for realizing gate-based quantum computation. In superconducting circuits, tunable interactions are often implemented using flux-tunable qubits or coupling elements, adding control complexity and noise sources. Here, we realize a tunable ZZ interaction between two transmon qubits with fixed frequencies and fixed coupling, induced by driving both transmons off resonantly. We show tunable coupling over 1 order of magnitude larger than the static coupling, and change the sign of the interaction, enabling cancellation of the idle coupling. Further, this interaction is amenable to large quantum processors: the drive frequency can be flexibly chosen to avoid spurious transitions, and because both transmons are driven, it is resilient to microwave cross talk. We apply this interaction to implement a controlled phase (CZ) gate with a gate fidelity of 99.43(1)% as measured by cycle benchmarking, and we find the fidelity is limited by incoherent errors.

arXiv:2105.05384•Physical Review Letters•Nov 9, 2021•78 citations
Improving two-qubit gate performance and suppressing cross talk are major, but often competing, challenges to achieving scalable quantum computation. In particular, increasing the coupling to realize faster gates has been intrinsically linked to enhanced cross talk due to unwanted two-qubit terms in the Hamiltonian. Here, we demonstrate a novel coupling architecture for transmon qubits that circumvents the standard relationship between desired and undesired interaction rates. Using two fixed frequency coupling elements to tune the dressed level spacings, we demonstrate an intrinsic suppression of the static ZZ while maintaining large effective coupling rates. Our architecture reveals no observable degradation of qubit coherence (T_{1},T_{2}>100 μs) and, over a factor of 6 improvement in the ratio of desired to undesired coupling. Using the cross-resonance interaction, we demonstrate a 180 ns single-pulse controlled not (cnot) gate, and measure a cnot fidelity of 99.77(2)% from interleaved randomized benchmarking.
Engineering high-fidelity two-qubit gates is an indispensable step toward practical quantum computing. For superconducting quantum platforms, one important setback is the stray interaction between qubits, which causes significant coherent errors. For transmon qubits, protocols for mitigating such errors usually involve fine-tuning the hardware parameters or introducing usually noisy flux-tunable couplers. In this work, we propose a simple scheme to cancel these stray interactions. The coupler used for such cancellation is a driven high-coherence resonator, where the amplitude and frequency of the drive serve as control knobs. Through the resonator-induced-phase (RIP) interaction, the static ZZ coupling can be entirely neutralized. We numerically show that such a scheme can enable short and high-fidelity entangling gates, including cross-resonance CNOT gates within 40 ns and adiabatic CZ gates within 140 ns. Our architecture is not only ZZ free but also contains no extra noisy components, such that it preserves the coherence times of fixed-frequency transmon qubits. With the state-of-the-art coherence times, the error of our cross-resonance CNOT gate can be reduced to below 1e-4.
Engineering high-fidelity two-qubit gates is an indispensable step toward practical quantum computing. For superconducting quantum platforms, one important setback is the stray interaction between qubits, which causes significant coherent errors. For transmon qubits, protocols for mitigating such errors usually involve fine-tuning the hardware parameters or introducing usually noisy flux-tunable couplers. In this work, we propose a simple scheme to cancel these stray interactions. The coupler used for such cancelation is a driven high-coherence resonator, where the amplitude and frequency of the drive serve as control knobs. Through the resonator-induced-phase interaction, the static ZZZZZZ coupling can be entirely neutralized. We numerically show that such a scheme can enable short and high-fidelity entangling gates, including cross-resonance controlled-not (cnot) gates within 40 ns and adiabatic controlled-ZZZ gates within 140 ns. Our architecture is not only ZZZZZZ-free, but also contains no extra noisy components, such that it preserves the coherence times of fixed-frequency transmon qubits. With the state-of-the-art coherence times, the error of our cross-resonance cnot gate can be reduced to below ${10}^{\ensuremath{-}4}$.
High-fidelity single- and two-qubit gates are essential building blocks for a fault-tolerant quantum computer. While there has been much progress in suppressing single-qubit gate errors in superconducting qubit systems, two-qubit gates still suffer from error rates that are orders of magnitude higher. One limiting factor is the residual ZZ-interaction, which originates from a coupling between computational states and higher-energy states. While this interaction is usually viewed as a nuisance, here we experimentally demonstrate that it can be exploited to produce a universal set of fast single- and two-qubit entangling gates in a coupled transmon qubit system. To implement arbitrary single-qubit rotations, we design a new protocol called the two-axis gate that is based on a three-part composite pulse. It rotates a single qubit independently of the state of the other qubit despite the strong ZZ-coupling. We achieve single-qubit gate fidelities as high as 99.1% from randomized benchmarking measurements. We then demonstrate both a CZ gate and a CNOT gate. Because the system has a strong ZZ-interaction, a CZ gate can be achieved by letting the system freely evolve for a gate time tg=53.8t_g=53.8tg​=53.8 ns. To design the CNOT gate, we utilize an analytical microwave pulse shape based on the SWIPHT protocol for realizing fast, low-leakage gates. We obtain fidelities of 94.6% and 97.8% for the CNOT and CZ gates respectively from quantum progress tomography.
Superconducting transmon processors represent a leading platform for large-scale quantum computing due to their high gate fidelities and scalability. However, conventional qubit-coupler-qubit (QCQ) architectures face critical physical and structural bottlenecks, notably frequency crowding [spectator qubit collisions] during system scaling and inefficient mapping onto the standard surface code.To overcome these limitations, we propose a novel lattice-patch architecture that couples four fixed-frequency transmons to a single fixed-frequency coupler.This design enhances qubit connectivity and maps directly onto the surface-code lattice unit [plaquette], thereby minimizing the compilation overhead associated with logical qubit implementation. Furthermore, utilizing an entirely fixed-frequency design intrinsically eliminates susceptibility to external flux noise, ensuring robust operational stability.Multi-level numerical simulations demonstrate CNOT gate fidelities exceeding 0.98 across all six connectivity directions within the patch. Nevertheless, the complex interaction network of the four-qubit architecture induces unintended residual phase accumulation during cross-resonance driving. This parasitic effect necessitates precise calibration, achievable via virtual RzR_zRz​ gates [software phase updates]. Ultimately, our results establish the lattice-patch architecture as an efficient, robust building block for future fault-tolerant quantum computers.
The cross-resonance gate (cr gate) architecture that exploits fixed-frequency transmon qubits and fixed couplings is a leading candidate for quantum computing. Nonetheless, without the tunability of qubit parameters such as qubit frequencies and couplings, gate operations can be limited by the presence of quantum crosstalk arising from the always-on couplings. When increasing system sizes, this can become even more serious, considering frequency collisions caused by fabrication uncertainties. Here, we introduce a cr-gate-based transmon architecture with passive mitigation of both quantum crosstalk and frequency collisions. Assuming typical parameters, we show that ZZZZZZ crosstalk can be suppressed while maintaining XYXYXY couplings to support fast, high-fidelity cr gates. The architecture also allows one to go beyond the existing literature by extending the operating regions in which fast, high-fidelity cr gates are possible, thus alleviating the frequency-collision issue. To examine the practicality, we analyze the cr-gate performance in multiqubit lattices and provide an intuitive model for identifying and mitigating the dominant source of error. For the state-of-the-art precision in setting frequencies, we further investigate its impact on the gates. We find that ZZZZZZ crosstalk and frequency collisions can be largely mitigated for neighboring qubits, while interactions beyond near-neighbor qubits can introduce new frequency collisions. As the strength is typically at the submegahertz level, adding weak off-resonant drives to selectively shift qubits can mitigate the collisions. This work could be useful for suppressing quantum crosstalk and improving gate fidelities in large-scale quantum processors based on fixed-frequency qubits and fixed couplings.
Generating high-fidelity, tunable entanglement between qubits is crucial for realizing gate-based quantum computation. In superconducting circuits, tunable interactions are often implemented using flux-tunable qubits or coupling elements, adding control complexity and noise sources. Here, we realize a tunable ZZ interaction between two transmon qubits with fixed frequencies and fixed coupling, induced by driving both transmons off resonantly. We show tunable coupling over 1 order of magnitude larger than the static coupling, and change the sign of the interaction, enabling cancellation of the idle coupling. Further, this interaction is amenable to large quantum processors: the drive frequency can be flexibly chosen to avoid spurious transitions, and because both transmons are driven, it is resilient to microwave cross talk. We apply this interaction to implement a controlled phase (CZ) gate with a gate fidelity of 99.43(1)% as measured by cycle benchmarking, and we find the fidelity is limited by incoherent errors.