© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

arXiv:2008.00831 · Scientific Reports

Enhanced observation time of magneto-optical traps using micro-machined non-evaporable getter pumps

Rodolphe Boudot, J. P. McGilligan, Kaitlin R. Moore, Vincent N. Maurice, Gabriela D. Martinez, Azure Hansen, Emeric de Clercq, John E. Kitching

Published Oct 6, 2020• 34 citations

Abstract

We show that micro-machined non-evaporable getter pumps (NEGs) can extend the time over which laser cooled atoms can be produced in a magneto-optical trap (MOT), in the absence of other vacuum pumping mechanisms. In a first study, we incorporate a silicon-glass microfabricated ultra-high vacuum (UHV) cell with silicon etched NEG cavities and alumino-silicate glass (ASG) windows and demonstrate the observation of a repeatedly-loading MOT over a 10 min period with a single laser-activated NEG. In a second study, the capacity of passive pumping with laser activated NEG materials is further investigated in a borosilicate glass-blown cuvette cell containing five NEG tablets. In this cell, the MOT remained visible for over 4 days without any external active pumping system. This MOT observation time exceeds the one obtained in the no-NEG scenario by almost five orders of magnitude. The cell scalability and potential vacuum longevity made possible with NEG materials may enable in the future the development of miniaturized cold-atom instruments.

DOI: 10.1038/s41598-020-73605-z

Related papers

Laser cooling in a chip-scale platform

J. P. McGilligan, Kaitlin Moore, Argyrios T. Dellis +7 more

Chip-scale atomic devices built around micro-fabricated alkali vapor cells are at the forefront of compact metrology and atomic sensors. We demonstrate a micro-fabricated vapor cell that is actively pumped to ultra-high-vacuum (UHV) to achieve laser cooling. A grating magneto-optical trap (GMOT) is incorporated with a 4 mm-thick Si/glass vacuum cell to demonstrate the feasibility of a fully miniaturized laser cooling platform. A two-step optical excitation process in rubidium is used to overcome surface-scatter limitations to the GMOT imaging. The unambiguous miniaturization and form-customizability made available with micro-fabricated UHV cells provide a promising platform for future compact cold-atom sensors.

•Aug 3, 2020•43 citations

A passively pumped vacuum package sustaining cold atoms for more than 200 days

Bethany J. Little, Gregory W. Hoth, Justin Christensen +5 more

Compact cold-atom sensors depend on vacuum technology. One of the major limitations to miniaturizing these sensors is the active pumps—typically ion pumps—that are required to sustain the low pressure needed for laser cooling. Although passively pumped chambers have been proposed as a solution to this problem, technical challenges have prevented successful operation at the levels needed for cold-atom experiments. The authors present the first demonstration of a vacuum package successfully independent of ion pumps for more than a week; their vacuum package is capable of sustaining a cloud of cold atoms in a magneto-optical trap (MOT) for greater than 200 days using only non-evaporable getters and a rubidium dispenser. Measurements of the MOT lifetime indicate that the package maintains a pressure of better than 2×10−7 Torr. This result will significantly enable the development of compact atomic sensors, including those sensitive to magnetic fields, where the absence of an ion pump will be advantageous.

arXiv:2101.01051•AVS Quantum Science•Jul 15, 2021•39 citations

Laser cooling in a chip-scale platform

J. P. McGilligan, K. R. Moore, A. Dellis +7 more

Chip-scale atomic devices built around micro-fabricated alkali vapor cells are at the forefront of compact metrology and atomic sensors. We demonstrate a micro-fabricated vapor cell that is actively pumped to ultra-high-vacuum (UHV) to achieve laser cooling. A grating magneto-optical trap (GMOT) is incorporated with a 4 mm-thick Si/glass vacuum cell to demonstrate the feasibility of a fully miniaturized laser cooling platform. A two-step optical excitation process in rubidium is used to overcome surface-scatter limitations to the GMOT imaging. The unambiguous miniaturization and form-customizability made available with micro-fabricated UHV cells provide a promising platform for future compact cold-atom sensors.

arXiv:2005.05818•Applied Physics Letters•Aug 3, 2020•61 citations

Chip-scale MOT for Microsystems Technology

Argyrios T. Dellis, Matthew T. Hummon, Songbai Kang +2 more

We are developing a micro-fabricated platform to support the creation of laser cooled samples for chip scale instruments. Our chip scale cell is 4 mm thick and 28mm × 28mm wide, is made by anodically bonding glass windows to a silicon frame and is pumped by a 2 L/sec ion pump. Six independent laser beams, each having 1mW power, and a pair anti-Helmholtz coils are used to cool and trap ~ 5×105 atoms. We have characterized the MOT system and we are in the process of replacing the actively pumped cell by a passively pumped cell where the pumping elements are non-evaporable getters.

Frontiers in Optics•Jan 1, 2016•2 citations

Contributed Review: The feasibility of a fully miniaturized magneto-optical trap for portable ultracold quantum technology

J. A. Rushton, M. Aldous, Matthew Himsworth

Experiments using laser cooled atoms and ions show real promise for practical applications in quantum-enhanced metrology, timing, navigation, and sensing as well as exotic roles in quantum computing, networking, and simulation. The heart of many of these experiments has been translated to microfabricated platforms known as atom chips whose construction readily lend themselves to integration with larger systems and future mass production. To truly make the jump from laboratory demonstrations to practical, rugged devices, the complex surrounding infrastructure (including vacuum systems, optics, and lasers) also needs to be miniaturized and integrated. In this paper we explore the feasibility of applying this approach to the Magneto-Optical Trap; incorporating the vacuum system, atom source and optical geometry into a permanently sealed micro-litre system capable of maintaining 10(-10) mbar for more than 1000 days of operation with passive pumping alone. We demonstrate such an engineering challenge is achievable using recent advances in semiconductor microfabrication techniques and materials.

arXiv:1405.3148•Review of Scientific Instruments•Dec 1, 2014•124 citations

Progress toward a chipscale MOT

Kaitlin Moore, J. P. McGilligan, Rodolphe Boudot +1 more

We report on progress toward forming a magneto-optical trap (MOT) in a passively-pumped, chipscale MEMS-fabricable package. This work is an essential step in integrating cold atoms into mass-producible, portable instruments\footnote{J Kitching, et al. \textbf{J. Phys: Conf. Ser.} 723, 1 (2016)},\footnote{JA Rushton, et al. \textbf{Rev. of Sci. Instr.} 85, 12 (2014)}. One major challenge is preserving ultra-high vacuum levels in anodically-bonded MEMS cells without the use of an active pump. Ultra-high vacuum levels are critical to forming a vapor-loaded MOT\footnote{T Arpornthip, et al. \textbf{PRA} 85, 033420 (2012)},\footnote{E Cornell, et al. In Collected Papers Of Carl Wieman, pp. 533-584, Sec. 2.8.4, (2008)} and attaining commercially-relevant cell lifetimes. Here, we report on experimentally-tested solutions to mitigating gas evolution in the 1-cc-volume MEMS cell during and after the fabrication process, as well as controlling rubidium-vapor content. We report on testing performed in our actively-pumped MEMS-cell MOT systems and outline remaining steps toward achieving a true chipscale MOT.

•May 27, 2019•0 citations

We show that micro-machined non-evaporable getter pumps (NEGs) can extend the time over which laser cooled atoms can be produced in a magneto-optical trap (MOT), in the absence of other vacuum pumping mechanisms. In a first study, we incorporate a silicon-glass microfabricated ultra-high vacuum (UHV) cell with silicon etched NEG cavities and alumino-silicate glass (ASG) windows and demonstrate the observation of a repeatedly-loading MOT over a 10 min period with a single laser-activated NEG. In a second study, the capacity of passive pumping with laser activated NEG materials is further investigated in a borosilicate glass-blown cuvette cell containing five NEG tablets. In this cell, the MOT remained visible for over 4 days without any external active pumping system. This MOT observation time exceeds the one obtained in the no-NEG scenario by almost five orders of magnitude. The cell scalability and potential vacuum longevity made possible with NEG materials may enable in the future the development of miniaturized cold-atom instruments.

Chip-scale atomic devices built around micro-fabricated alkali vapor cells are at the forefront of compact metrology and atomic sensors. We demonstrate a micro-fabricated vapor cell that is actively pumped to ultra-high-vacuum (UHV) to achieve laser cooling. A grating magneto-optical trap (GMOT) is incorporated with a 4 mm-thick Si/glass vacuum cell to demonstrate the feasibility of a fully miniaturized laser cooling platform. A two-step optical excitation process in rubidium is used to overcome surface-scatter limitations to the GMOT imaging. The unambiguous miniaturization and form-customizability made available with micro-fabricated UHV cells provide a promising platform for future compact cold-atom sensors.

Compact cold-atom sensors depend on vacuum technology. One of the major limitations to miniaturizing these sensors is the active pumps—typically ion pumps—that are required to sustain the low pressure needed for laser cooling. Although passively pumped chambers have been proposed as a solution to this problem, technical challenges have prevented successful operation at the levels needed for cold-atom experiments. The authors present the first demonstration of a vacuum package successfully independent of ion pumps for more than a week; their vacuum package is capable of sustaining a cloud of cold atoms in a magneto-optical trap (MOT) for greater than 200 days using only non-evaporable getters and a rubidium dispenser. Measurements of the MOT lifetime indicate that the package maintains a pressure of better than 2×10−7 Torr. This result will significantly enable the development of compact atomic sensors, including those sensitive to magnetic fields, where the absence of an ion pump will be advantageous.

Chip-scale atomic devices built around micro-fabricated alkali vapor cells are at the forefront of compact metrology and atomic sensors. We demonstrate a micro-fabricated vapor cell that is actively pumped to ultra-high-vacuum (UHV) to achieve laser cooling. A grating magneto-optical trap (GMOT) is incorporated with a 4 mm-thick Si/glass vacuum cell to demonstrate the feasibility of a fully miniaturized laser cooling platform. A two-step optical excitation process in rubidium is used to overcome surface-scatter limitations to the GMOT imaging. The unambiguous miniaturization and form-customizability made available with micro-fabricated UHV cells provide a promising platform for future compact cold-atom sensors.

We are developing a micro-fabricated platform to support the creation of laser cooled samples for chip scale instruments. Our chip scale cell is 4 mm thick and 28mm × 28mm wide, is made by anodically bonding glass windows to a silicon frame and is pumped by a 2 L/sec ion pump. Six independent laser beams, each having 1mW power, and a pair anti-Helmholtz coils are used to cool and trap ~ 5×105 atoms. We have characterized the MOT system and we are in the process of replacing the actively pumped cell by a passively pumped cell where the pumping elements are non-evaporable getters.

Experiments using laser cooled atoms and ions show real promise for practical applications in quantum-enhanced metrology, timing, navigation, and sensing as well as exotic roles in quantum computing, networking, and simulation. The heart of many of these experiments has been translated to microfabricated platforms known as atom chips whose construction readily lend themselves to integration with larger systems and future mass production. To truly make the jump from laboratory demonstrations to practical, rugged devices, the complex surrounding infrastructure (including vacuum systems, optics, and lasers) also needs to be miniaturized and integrated. In this paper we explore the feasibility of applying this approach to the Magneto-Optical Trap; incorporating the vacuum system, atom source and optical geometry into a permanently sealed micro-litre system capable of maintaining 10(-10) mbar for more than 1000 days of operation with passive pumping alone. We demonstrate such an engineering challenge is achievable using recent advances in semiconductor microfabrication techniques and materials.

We report on progress toward forming a magneto-optical trap (MOT) in a passively-pumped, chipscale MEMS-fabricable package. This work is an essential step in integrating cold atoms into mass-producible, portable instruments\footnote{J Kitching, et al. \textbf{J. Phys: Conf. Ser.} 723, 1 (2016)},\footnote{JA Rushton, et al. \textbf{Rev. of Sci. Instr.} 85, 12 (2014)}. One major challenge is preserving ultra-high vacuum levels in anodically-bonded MEMS cells without the use of an active pump. Ultra-high vacuum levels are critical to forming a vapor-loaded MOT\footnote{T Arpornthip, et al. \textbf{PRA} 85, 033420 (2012)},\footnote{E Cornell, et al. In Collected Papers Of Carl Wieman, pp. 533-584, Sec. 2.8.4, (2008)} and attaining commercially-relevant cell lifetimes. Here, we report on experimentally-tested solutions to mitigating gas evolution in the 1-cc-volume MEMS cell during and after the fabrication process, as well as controlling rubidium-vapor content. We report on testing performed in our actively-pumped MEMS-cell MOT systems and outline remaining steps toward achieving a true chipscale MOT.