Squeezing and Multimode Entanglement of Surface Acoustic Wave Phonons
Gustav Andersson, Shan W. Jolin, Marco Scigliuzzo, Riccardo Borgani, Mats O. Tholén, J. C. Rivera Hernández, Vitaly S. Shumeiko, David B. Haviland, Per Delsing
Exploiting multiple modes in a quantum acoustic device could enable applications in quantum information in a hardware-efficient setup, including quantum simulation in a synthetic dimension and continuous-variable quantum computing with cluster states.We develop a multimode surface acoustic wave (SAW) resonator with a superconducting quantum interference device (SQUID) integrated in one of the Bragg reflectors.The interaction with the SQUID-shunted mirror gives rise to coupling between the more than 20 accessible resonator modes.We exploit this coupling to demonstrate two-mode squeezing of SAW phonons, as well as four-mode multipartite entanglement.Our results open avenues for continuous-variable quantum computing in a compact hybrid quantum system.
Exploiting multiple modes in a quantum acoustic device could enable applications in quantum information in a hardware-efficient setup, including quantum simulation in a synthetic dimension and continuous-variable quantum computing with cluster states.We develop a multimode surface acoustic wave (SAW) resonator with a superconducting quantum interference device (SQUID) integrated in one of the Bragg reflectors.The interaction with the SQUID-shunted mirror gives rise to coupling between the more than 20 accessible resonator modes.We exploit this coupling to demonstrate two-mode squeezing of SAW phonons, as well as four-mode multipartite entanglement.Our results open avenues for continuous-variable quantum computing in a compact hybrid quantum system.
The past 20 years has seen rapid developments in circuit quantum electrodynamics, where superconducting qubits and resonators are used to control and study quantum light-matter interaction at a fundamental level. The development of this field is strongly influenced by quantum information science and the prospect of realizing quantum computation, but also opens up opportunities for combinations of different physical systems and research areas. Superconducting circuits in the microwave domain offer a versatile platform for interfacing with other quantum systems thanks to strong nonlinearities and zero-point fluctuations, as well as flexibility in design and fabrication. Hybrid quantum systems based on circuit quantum electrodynamics could enable novel functionalities by exploiting the strengths of the individual components.This thesis covers experiments coupling superconducting circuits to surface acoustic waves (SAWs), mechanical waves propagating along the surface of a solid. Strong coupling can be engineered using the piezoelectric properties of GaAs substrates, and our experiments exploit this to investigate phenomena in quantum field-matter interaction. A key property of surface acoustic waves is the slow propagation speed, typically five orders of magnitude slower than light in vacuum, and the associated short wavelength. This enables the giant atom regime where the artificial atom in the form of a superconducting circuit is large compared to the wavelength of interacting SAW radiation, a condition which is difficult to realize in other systems. Experiments described in this thesis use these properties to demonstrate electromagnetically induced transparency for a mechanical mode, as well as non-Markovian interactions between an artificial giant atom and the SAW field. When the SAW field is confined to a resonant cavity, the short wavelength allows multimode spectra suitable for interacting with a frequency comb. We use a multimode SAW resonator to characterize the ensemble of microscopic two-level system defects with a two-tone spectroscopy approach. Finally, we introduce a hybrid superconducting-SAW resonator with applications in quantum information processing in mind. Experiments with this device demonstrate entanglement of SAW modes, and show promising results on the way to engineer cluster states for quantum computation in continuous variables.
As a result of study on surface acoustic waves (SAWs), we propose protocols for generating the quantum entanglement on phonons. In the protocol of phonon–photon entanglement generation, the hybrid system is composed of a surface acoustic wave resonator (SAWR), a superconducting resonator (SR) and a nitrogen-vacancy-center ensemble (NVE). For the generation of three phonon modes entanglement, the SAWRs are coupled to the corresponding NVEs, while the NVEs interact with the same SR. Both protocols exploit the resonant interaction and the dispersive coupling. By considering the decoherence of the corresponding systems, the fidelities of the phonon–photon entanglement and three phonon modes entanglement reach 99.35% and 91.01%, respectively. Generalizing the approaches, we also present the protocol of multiple phonon modes entanglement.
Hybrid mechanical-superconducting systems for quantum information processing have attracted significant attention due to their potential applications. In such systems, the weak coupling regime, dominated by dissipation, has been extensively studied. The strong coupling regime, where coherent energy exchange exceeds losses, has also been widely explored. However, the transition-coupling regime, which lies between the above two and exhibits rich, unique physics, remains underexplored. In this study, we fabricate a tunable coupling device to investigate the coupling of a superconducting transmon qubit to a seven-mode surface acoustic-wave resonator (SAWR), with a particular focus on the transition-coupling regime. Through a series of phonon oscillation experiments and studies in the dispersive regime, we systematically characterize the performance of the SAWR. We then explore the complex dynamics of energy exchange between the qubit and the mechanical modes, highlighting the interplay between dissipation and coherence. Finally, we propose a protocol for qubit readout and fast reset with a multimode mechanical cavity using one mode for readout and another mode for reset. We have demonstrated in simulation that the qubit achieves both fast reset and high coherence performance when the qubit is coupled to the reset mode in the transition-coupling regime.
Precise control of mechanical modes in the quantum regime is a key resource for quantum technologies, offering promising pathways for quantum sensing with macroscopic systems and scalable architectures for quantum simulation. In this work, we realize a multimode mechanical cavity coupled to a superconducting Kerr resonator, which induces nonlinearity in the mechanical modes. The Kerr mode is realized by a flux-tunable superconducting quantum interference device (SQUID) array resonator, while the mechanical modes are implemented by a surface acoustic wave cavity. Both mechanical and electromagnetic modes are individually addressable via dedicated measurement lines, enabling full spectroscopic characterization. We introduce a straightforward protocol to measure the SQUID array resonator’s participation ratio in the hybrid acoustic modes, quantifying the degree of hybridization. The participation ratio reveals that our device operates at the onset of the multimode coupling regime, where multiple acoustic modes simultaneously interact with the nonlinear superconducting element. Furthermore, this platform allows controllable Kerr-type nonlinearities in multiple acoustic modes, with the participation ratio serving as the key parameter determining both the dissipation rates and nonlinear strengths of these hybridized modes. Close to the resonant regime, we measure a cross-Kerr interaction between seven pairs of mechanical modes, which is controllable via the SQUID array resonator detuning. Finally, we apply a two-photon parametric drive to the SQUID array resonator and observe the resulting parametric down-conversion and metastable state switching in a mechanical mode. These results establish a platform for engineering nonlinear multimode mechanical interactions, offering potential for future integration with superconducting qubits and implementation of multiple mechanical qubits.
Abstract The experimental investigation of quantum devices incorporating mechanical resonators has opened up new frontiers in the study of quantum mechanics at a macroscopic level. It has recently been shown that surface acoustic waves (SAWs) can be piezoelectrically coupled to superconducting qubits, and confined in high-quality Fabry–Perot cavities in the quantum regime. Here we present measurements of a device in which a superconducting qubit is coupled to a SAW cavity, realising a surface acoustic version of cavity quantum electrodynamics. We use measurements of the AC Stark shift between the two systems to determine the coupling strength, which is in agreement with a theoretical model. This quantum acoustodynamics architecture may be used to develop new quantum acoustic devices in which quantum information is stored in trapped on-chip acoustic wavepackets, and manipulated in ways that are impossible with purely electromagnetic signals, due to the 10 5 times slower mechanical waves.