This thesis focuses on the mathematical description and application of nonlinear cavity optomechanical systems. The first part is concerned with solving the dynamics of the standard nonlinear optomechanical Hamiltonian with an additional time-dependent mechanical displacement and single-mode squeezing term. The solution is based on identifying a Lie algebra that generates the time-evolution of the system, which reduces the problem to considering a finite set of coupled ordinary differential equations of real functions. The second part applies the solutions of the extended optomechanical Hamiltonian to the study of non-Gaussianity. We compute the non-Gaussian character of an optomechanical state as a function of the parameters in the Hamiltonian, and investigate the interplay between the non-Gaussianity, the strength of the nonlinear coupling and the strength of the single-mode mechanical squeezing term. We find that the strength and form of the nonlinear coupling strongly impacts the non-Gaussianity, and that its relationship with the squeezing term is highly complex. The third part concerns the use of nonlinear optomechanical systems as quantum sensors. We derive a general expression of the quantum Fisher information given the extended optomechanical Hamiltonian and demonstrate its applicability through three concrete examples: estimating the strength of a nonlinear light--matter coupling, the strength of a time-modulated mechanical displacement, and the strength of a single-mode mechanical squeezing parameter, all of which are modulated at resonance. In the last Chapter of the thesis, we consider the estimation of a constant gravitational acceleration with an optomechanical system. Our results suggest that optomechanical systems could, in principle, be used as powerful quantum sensors.
This thesis focuses on the mathematical description and application of nonlinear cavity optomechanical systems. The first part is concerned with solving the dynamics of the standard nonlinear optomechanical Hamiltonian with an additional time-dependent mechanical displacement and single-mode squeezing term. The solution is based on identifying a Lie algebra that generates the time-evolution of the system, which reduces the problem to considering a finite set of coupled ordinary differential equations of real functions. The second part applies the solutions of the extended optomechanical Hamiltonian to the study of non-Gaussianity. We compute the non-Gaussian character of an optomechanical state as a function of the parameters in the Hamiltonian, and investigate the interplay between the non-Gaussianity, the strength of the nonlinear coupling and the strength of the single-mode mechanical squeezing term. We find that the strength and form of the nonlinear coupling strongly impacts the non-Gaussianity, and that its relationship with the squeezing term is highly complex. The third part concerns the use of nonlinear optomechanical systems as quantum sensors. We derive a general expression of the quantum Fisher information given the extended optomechanical Hamiltonian and demonstrate its applicability through three concrete examples: estimating the strength of a nonlinear light--matter coupling, the strength of a time-modulated mechanical displacement, and the strength of a single-mode mechanical squeezing parameter, all of which are modulated at resonance. In the last Chapter of the thesis, we consider the estimation of a constant gravitational acceleration with an optomechanical system. Our results suggest that optomechanical systems could, in principle, be used as powerful quantum sensors.
We study the fundamental bounds on precision measurements of parameters contained in a time-dependent nonlinear optomechanical Hamiltonian, which includes the nonlinear light-matter coupling, a mechanical displacement term, and a single-mode mechanical squeezing term. By using a recently developed method to solve the dynamics of this system, we derive a general expression for the quantum Fisher information and demonstrate its applicability through three concrete examples: estimation of the strength of a nonlinear light-matter coupling, the strength of a time-modulated mechanical displacement, and a single-mode mechanical squeezing parameter, all of which are modulated at resonance. Our results can be used to compute the sensitivity of a nonlinear optomechanical system to a number of external and internal effects, such as forces acting on the system or modulations of the light-matter coupling.
Abstract We solve the time evolution of a nonlinear optomechanical Hamiltonian with arbitrary time-dependent mechanical displacement, mechanical single-mode squeezing and a time-dependent optomechanical coupling up to the solution of two second-order differential equations. The solution is based on identifying a minimal and finite Lie algebra that generates the time-evolution of the system. This reduces the problem to considering a finite set of coupled ordinary differential equations of real functions. To demonstrate the applicability of our method, we compute the degree of non-Gaussianity of the time-evolved state of the system by means of a measure based on the relative entropy of the non-Gaussian state and its closest Gaussian reference state. We find that the addition of a constant mechanical squeezing term to the standard optomechanical Hamiltonian generally decreases the overall non-Gaussian character of the state. For sinusoidally modulated squeezing, the two second-order differential equations mentioned above take the form of the Mathieu equation. We derive perturbative solutions for a small squeezing amplitude at parametric resonance and show that they correspond to the rotating-wave approximation at times larger than the scale set by the mechanical frequency. We find that the non-Gaussianity of the state increases with both time and the squeezing parameter in this specific regime.
In a nutshell, a cavity optomechanical system consists of a mechanical oscillator inside an optical cavity. Cavity optomechanics studies the interplay between the light-matter radiation-pressure interaction and the change in the cavity frequency induced by mechanical motion. By leveraging the tools of quantum optics and quantum measurement, cavity quantum optomechanics enables the engineering of nonclassical quantum states of bulk matter. In this thesis, I present protocols for engineering such nonclassical quantum states in Part II. First, I introduce a scheme to ‘grow’ a quantum kitten state of a mechanical oscillator into a macroscopic Schrödinger cat state using a series of nonlinear pulsed optomechanical interactions. Next, I detail our proposed schemes to generate and verify entanglement between two mechanical oscillators. Moving on from pulsed optomechanics, I describe the theory behind an experiment that achieved multi-phonon subtraction from a mechanical oscillator in a continuously driven Brillouin optomechanical system. In the final chapter of Part II, I provide a theoretical preview of an experiment that investigates the behaviour of the mechanical oscillator when no light is detected at the output. In Part III, I introduce a new framework for nonlinear cavity quantum optomechanics that incorporates the intrinsic nonlinearity of the radiation-pressure interaction, the nonlinearity from the cavity enhancement, and higher-order mechanical position terms in the expansion of the cavity frequency. I then propose a scheme for measuring mechanical position using general-dyne detection, applicable to pulsed and continuous measurements. This predicts a new regime of operation, the “stochastic Gaussian” regime. Finally, I discuss a protocol for deterministic mechanical squeezing that utilizes the cavity response.
We study the fundamental sensitivity that can be achieved with an ideal optomechanical system in the nonlinear regime for measurements of time-dependent gravitational fields. The optomechanical system consists of a cavity mode and a mechanical oscillator coupled to it via (non-linear) radiation pressure coupling. Using recently developed methods to solve the dynamics of a nonlinear optomechanical system with a time-dependent Hamiltonian, we compute the quantum Fisher information for linear displacements of the mechanical element due to gravity. We demonstrate that the sensitivity can be further enhanced by injecting squeezed states of the cavity field or by modulating the light–matter coupling of the optomechanical system. We specifically apply our results to the measurement of gravitational fields from small oscillating masses, where we show that, in principle, the gravitational field of an oscillating nanogram mass can be detected based on experimental parameters that will likely be accessible in the near-term future. Finally, we identify the experimental parameter regime necessary for gravitational wave detection with a quantum optomechanical sensor.
Non-relativistic quantum mechanics have proven to be a significant framework to understand the non-classical behaviour of light and the microcosmos. Perhaps, one of the first technological revolutions within quantum theory came with the invention of the transistor, whereby a purely quantum mechanical description was required. Currently, another outstanding revolution is taking place in a crossroad where information science meets quantum mechanics (this being the quantum information field). Such an area of work contemplates both the fascinating theoretical aspect of quantum correlations, as well as implementations towards quantum tasks performed by a universal quantum computer; tasks that cannot be realised (or they are hard to implement) within the classical domain. This Thesis is devoted to study the dynamics of quantum entanglement in spin-optomechanics systems. In particular, we explore the quantum stabilization of quantum entanglement, a quantum concentration scheme in opto-mechanics and an interfacing of matter and light towards quantum networking applications. Additionally, we also investigate theoretical aspects of quantum correlations within thermal environments, as well as the topical area of quantum sudden transitions. In Chapter 1, we provide a brief summary of quantum information and of the quantum optics framework to cover elementary concepts and techniques used subsequently in this work. Subsequently, in Chapter 2 we present the stabilization of quantum entanglement in a non-linear qubit-oscillator system. The inclusion of a modest nonlinearity gives three results, i) the loss of periodicity of the system, ii) the occurrence of quadrature squeezing appearing for a short time, and iii) the quantum entanglement reaches higher values in contrast to the case without non-linearity. In Chapter 3, a technique to concentrate/distill a two-mode vacuum state in optomechanics via unsharp measurements is presented. Here, one of the optical modes is injected into a cavity at first, and thereafter, it is nonlinearly coupled to a mechanical oscillator. Afterwards, the position of the oscillator is measured using pulsed optomechanics and homodyne detection. The results show that this measurement can conditionally increase the initial entanglement. Next, in Chapter 4, stimulated by optomechanical transducers and quantum networking, a light-matter system is constructed where a qubit is coupled to a cavity mode mediated through a mechanical oscillator. The qubit-oscillator conditionally displaced Hamiltonian and the oscillator-cavity radiation-pressure interaction generate a maximal qubit-cavity entanglement. Additionally, we consider the case in which the cavity mode is coupled to a waveguide, numerical calculations show a promising qubit-fibre entanglement under a weak matter-light coupling. For the quantum network case, we coupled a generic qubit in the first node to a second qubit-cavity distant Jaynes-Cummings system coupled through an optical fibre, where qubit-qubit correlations can be achieved in the quantum open systems scenario. In Chapter 5, we study the evolution of an open quantum system within the Born-Markov microscopic master equation (MME). Essentially, two distant two-level atoms are trapped in fibre-coupled cavities. Under the approximation of one-excitation allowed in the atom-cavity-fibre basis, we can obtain quantum correlations induced by thermal fluctuations from the environments. Lastly, in Chapter 6, we bring together previously elements explored in this Thesis. The system is a hybrid atomic-mechanical system formed from two remote qubits interacting with individual harmonic oscillators. This system, as in Chapter 4, explores interesting applications in quantum networking schemes. The two qubits are initially prepared in a Bell-diagonal state, and consequently the two-qubit correlations exhibit few interesting effects such as freezing, sudden changes and revivals in the evolution of the quantum entropic discord. To conclude, I summarize my findings in Chapter 7.
We study the fundamental sensitivity that can be achieved with an ideal optomechanical system in the nonlinear regime for measurements of time-dependent gravitational fields. Using recently developed methods to solve the dynamics of a nonlinear optomechanical system with a time-dependent Hamiltonian, we compute the quantum Fisher information for linear displacements of the mechanical element due to gravity. We demonstrate that the sensitivity can not only be further enhanced by injecting squeezed states of the cavity field, but also by modulating the light--matter coupling of the optomechanical system. We specifically apply our results to the measurement of gravitational fields from small oscillating masses, where we show that, in principle, the gravitational field of an oscillating nano-gram mass can be detected based on experimental parameters that will likely be accessible in the near-term future. Finally, we identify the experimental parameter regime necessary for gravitational wave detection with a quantum optomechanical sensor.