We introduce the Nuclear-Electronic All-Particle Density Matrix Renormalization Group (NEAP-DMRG) method for solving the time-independent Schrödinger equation simultaneously for electrons and other quantum species. In contrast to the already existing multicomponent approaches, in this work, we construct from the outset a multi-reference trial wave function with stochastically optimized non-orthogonal Gaussian orbitals. By iterative refining of the Gaussians’ positions and widths, we obtain a compact multi-reference expansion for the multicomponent wave function. We extend the DMRG algorithm to multicomponent wave functions to take into account inter- and intra-species correlation effects. The efficient parameterization of the total wave function as a matrix product state allows NEAP-DMRG to accurately approximate the full configuration interaction energies of molecular systems with more than three nuclei and 12 particles in total, which is currently a major challenge for other multicomponent approaches. We present the NEAP-DMRG results for two few-body systems, i.e., H2 and H3+, and one larger system, namely, BH3.
We introduce the Nuclear-Electronic All-Particle Density Matrix Renormalization Group (NEAP-DMRG) method for solving the time-independent Schrödinger equation simultaneously for electrons and other quantum species. In contrast to the already existing multicomponent approaches, in this work, we construct from the outset a multi-reference trial wave function with stochastically optimized non-orthogonal Gaussian orbitals. By iterative refining of the Gaussians’ positions and widths, we obtain a compact multi-reference expansion for the multicomponent wave function. We extend the DMRG algorithm to multicomponent wave functions to take into account inter- and intra-species correlation effects. The efficient parameterization of the total wave function as a matrix product state allows NEAP-DMRG to accurately approximate the full configuration interaction energies of molecular systems with more than three nuclei and 12 particles in total, which is currently a major challenge for other multicomponent approaches. We present the NEAP-DMRG results for two few-body systems, i.e., H2 and H3+, and one larger system, namely, BH3.
We recently introduced [ J. Chem. Phys. 2020, 152, 204103] the nuclear-electronic all-particle density matrix renormalization group (NEAP-DMRG) method to solve the molecular Schrödinger equation, based on a stochastically optimized orbital basis, without invoking the Born–Oppenheimer approximation. In this work, we combine the DMRG method with the nuclear-electronic Hartree–Fock (NEHF-DMRG) approach, treating nuclei and electrons on the same footing. Inter- and intraspecies correlations are described within the DMRG method without truncating the excitation degree of the full configuration interaction wave function. We extend the concept of orbital entanglement and mutual information to nuclear-electronic wave functions and demonstrate that they are reliable metrics to detect strong correlation effects. We apply the NEHF-DMRG method to the HeHHe + molecular ion, to obtain accurate proton densities, ground-state total energies, and vibrational transition frequencies by comparison with state-of-the-art data obtained with grid-based approaches and modern configuration interaction methods. For HCN, we improve on the accuracy of the latter approaches with respect to both the ground-state absolute energy and proton density, which is a major challenge for multireference nuclear-electronic state-of-the-art methods.
An implementation of the single-site density matrix renormalization group (DMRG) approach for the quantum-chemical application to calculate approximate as well as exact electronic ground-state energies and wave functions of atoms and molecules is presented.The algorithm is formulated in terms of the variational and sizeconsistent class of wave functions, matrix product states, and their operator analogues, matrix product operators.A procedure to construct quantum-chemical Hamiltonian operators with long-range Coulomb interactions as matrix product operators is developed.The many-electron Hamiltonian operators are represented as sums and products of one-electron operators.For the efficient matrix product operator construction of quantum-chemical Hamiltonians, different basis spaces including discrete position and momentum space as well as molecular and atomic orbitals are investigated.Discrete position space yields the best matrix product operator size scaling, but introduces artificial long-range couplings in the kinetic energy term of the Hamiltonian which are a consequence of the DMRG algorithm in terms of matrix product states.The huge amount of discrete space points needed for an accurate description poses a problem because of the electron-electron interaction.Therefore, a momentum space or Fourier series expansion of the electron-electron interaction is shown which makes it possible to compress its matrix product operator representation.DMRG applied to quantum-chemical Hamiltonians in matrix product operator form can serve as means to directly (without mean-field treatment in advance) investigate quantum-chemical problems and find the analytically exact ground-state solution of small atoms and molecules.The next basis space analyzed in detail is the atomic orbital basis.The matrix product operator construction and the direct application of the DMRG method in this basis is examined.A physical compression scheme based on a singular value decomposition of the electron-electron interaction in the atomic orbital basis is demonstrated.Furthermore, DMRG calculations in the atomic orbital basis for certain systems where mean-field theory yields qualitatively wrong results and where higher-order approximative correction methods like truncated configuration interaction and coupled cluster cannot fully capture strong electron correlation effects are compared to results obtained in the molecular orbital basis.The comparison shows that atomic orbitals describe the physical situation well and thus lead to a tremendous reduction of the matrix product state dimension and the computational effort.i
Abstract The accurate electronic structure calculation for strongly correlated chemical systems requires an adequate description for both static and dynamic electron correlation, and is a persistent challenge for quantum chemistry. In order to account for static and dynamic electron correlations accurately and efficiently, in this work we propose a new method by integrating the density matrix renormalization group (DMRG) method and multi-reference second-order Epstein–Nesbet perturbation theory (ENPT2) with a selected configuration interaction (SCI) approximation. Compared with previous DMRG-based dynamic correlation methods, the DMRG-ENPT2 method extends the range of applicability, allowing us to efficiently calculate systems with very large active space beyond 30 orbitals. We demonstrate this by performing calculations on H 2 S with an active space of (16e, 15o), hexacene with an active space of (26e, 26o) and 2D H 64 square lattice with an active space of (42e, 42o).
Thanks to the high compression of the matrix product state (MPS) form of the wave function and the efficient site-by-site iterative sweeping optimization algorithm, the density matrix normalization group (DMRG) and its time-dependent variant (TD-DMRG) have been established as powerful computational tools in accurately simulating the electronic structure and quantum dynamics of strongly correlated molecules with a large number (10 1–2 ) of quantum degrees of freedom (active orbitals or vibrational modes). However, the quantitative characterization of the quantum many-body behaviors of realistic strongly correlated systems requires a further consideration of the interaction between the embedded active subsystem and the remaining correlated environment, e.g., a larger number (10 2–3 ) of external orbitals in electronic structure or infinite condensed-phase phononic modes in nucleus dynamics. To this end, we introduced three new post-DMRG and TD-DMRG approaches, namely (1) DMRG2sCI-MRCI and DMRG2sCI-ENPT by the reconstruction of selected configuration interaction (sCI) type of compact reference function from DMRG coefficients and the use of externally contracted MRCI (multireference configuration interaction) and Epstein–Nesbet perturbation theory (ENPT), without recourse to the expensive high order n -electron reduced density matrices ( n -RDMs). (2) DMRG combined with RR-MRCI (renormalized residue-based MRCI), which improves the computational accuracy and efficiency of internally contracted (ic) MRCI by renormalizing the contracted bases with small-sized buffer environment(s) of a few external orbitals as probes based on quantum information theory. (3) HM (hierarchical mapping)-TD-DMRG in which a large environment is reduced to a small number of renormalized environmental modes (which accounts for the most vital system–environment interactions) through stepwise mapping transformation. These advances extend the efficacy of highly accurate DMRG/TD-DMRG computations to the quantitative characterization of the electronic structure and quantum dynamics in realistic strongly correlated systems coupled with large environments and are reviewed in this paper.
This article presents an efficient and parallelized implementation of the density matrix renormalization group (DMRG) algorithm for quantum chemistry calculations. The DMRG method as a large-scale multireference electronic structure model is by nature particularly efficient for one-dimensionally correlated systems, while the present development is oriented toward applications for polynuclear transition metal compounds, in which the macroscopic one-dimensional structure of electron correlation is absent. A straightforward extension of the DMRG algorithm is proposed with further improvements and aggressive optimizations to allow its application with large multireference active space, which is often demanded for metal compound calculations. Special efficiency is achieved by making better use of sparsity and symmetry in the operator and wave function representations. By accomplishing computationally intensive DMRG calculations, the authors have found that a large number of renormalized basis states are required to represent high entanglement of the electron correlation for metal compound applications, and it is crucial to adopt auxiliary perturbative correction to the projected density matrix during the DMRG sweep optimization in order to attain proper convergence to the solution. Potential energy curve calculations for the Cr(2) molecule near the known equilibrium precisely predicted the full configuration interaction energies with a correlation space of 24 electrons in 30 orbitals [denoted by (24e,30o)]. The energies are demonstrated to be accurate to 0.6mE(h) (the error from the extrapolated best value) when as many as 10,000 renormalized basis states are employed for the left and right DMRG block representations. The relative energy curves for [Cu(2)O(2)](2+) along the isomerization coordinate were obtained from DMRG and other correlated calculations, for which a fairly large orbital space (32e,62o) is modeled as a full correlation space. The DMRG prediction nearly overlaps with the energy curve from the coupled cluster with singles, doubles, and perturbative triple [CCSD(T)] calculations, while the multireference complete active space self-consistent field (CASSCF) calculations with the small reference configuration (8e,8o) are found to overestimate the biradical character of the electronic state of [Cu(2)O(2)](2+) according to the one-electron density matrix analysis.
Despite the success of modern quantum chemistry in predicting properties of organic molecules, the treatment of inorganic systems, which have many close lying states, remains out of quantitative reach for current methods. To treat non-dynamic correlation, we take advantage of the density matrix renormalization group (DMRG) method that has become very successful in the field of solid state physics. We present a detailed study of the DMRG method, and we pay special attention to the evolution of the understanding behind the mathematical structure of the DMRG wave function. Our primary goal is to develop a density matrix renormalization group self--consistent--field (DMRG-SCF) approach, analogous to the complete active space self--consistent field (CASSCF) method, but dealing with large active spaces that are too demanding for the full configuration interaction (FCI) method. \nAs a first step towards such a DMRG-SCF procedure, we present a spin-adapted DMRG algorithm designed to target spin- and spatial-symmetry states that are hard to obtain while using an unrestricted algorithm. \nOur next step is a modification of the DMRG algorithm to obtain decreasing energy at every step during the sweep. This monotonically convergent DMRG scheme lets us obtain the two-body density matrix as a by--product of the existing procedure without any additional cost in storage. Additionally, the two-body density matrix produced at convergence using this scheme is free from the N-representability problem that is present when the two--body density matrix is produced with the two-site DMRG scheme without additional storage cost. Finally, taking advantage of the modifications developed herein, we present results obtained from our DMRG-SCF method. Lastly, we discuss possible ways of incorporating dynamical correlation into the DMRG scheme, in order to obtain a modern multireference approach.