Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2002.10042 · Physical Review A

Trapping Yb171 atoms into a one-dimensional optical lattice with a small waist

Akio Kawasaki, Boris Braverman, Edwin Pedrozo-Peñafiel, Chi Shu, Simone Colombo, Zeyang Li, Vladan Vuletić

Published Jul 29, 2020• 6 citations
arXivHTMLPDF

Abstract

In most experiments with atoms trapped in optical lattices, the transverse size of the optical lattice beams is of the order of tens of micrometers, and loading many atoms into smaller optical lattices has not been carefully investigated. We report trapping 1500 $^{171}\mathrm{Yb}$ atoms in a one-dimensional optical lattice generated by a narrow cavity mode at a distance of 0.14 mm from a mirror surface. The simplest approach of loading atoms from a mirror magneto-optical trap overlapped with the cavity mode allows the adjustment of the loading position by tuning a uniform bias magnetic field. The number of atoms trapped in the optical lattice exhibits two local maxima for different lattice depths, with a global maximum in the deeper lattice. These results open a way to quantum mechanical manipulation of atoms based on strong interaction with a tightly focused light field.

DOI
10.1103/physreva.102.013114

Related papers

Multiple Optical Dipole Traps by Strongly Focused Beams for Atom Manipulation

Tiancai Zhang

Controlling atoms by light is important for investigating the atom-atom entanglement and atom-atom dipole interaction.It is also a key issue for quantum information.Based on our present experimental system,we propose a scheme of generating adjustable multiple optical dipole traps by using three strongly focused beams,which implies controllable optical lattice for atom manipulation.We discuss in detail the influence of the incident angle and the phase difference on the depth and position of the traps and demonstrate that the manipulation of individual atom and control of trap-trap distance are realizable.It is of great importance in studying interaction between BECs in optical lattices,atom interference and atomic dipole-dipole interaction.

Acta Sinica Quantum Optica•Jan 1, 2008•0 citations

Trapping of single atom and precise control of its coupling strength in micro-optical cavity

Wei-Zhi Yan, Qing Fan, Pengfei Yang +3 more

Cavity quantum electrodynamic system with strongly coupled single atoms provides a good platform for studying quantum information processing, quantum simulation, quantum network, and distributed quantum computing. Cooling and trapping single atoms is a crucial technique in the quantum technology. At present, in a high-finesse cavity with finite space, cooling and trapping single atoms is a big challenge, even though it is a mature technique for free space. Great efforts have been made to cool and trap single atoms inside a cavity, and for a trapped atom its lifetime has reached as long as tens of seconds. Developing a more flexible method of cooling and trapping single atoms in a cavity is still essential for a strongly coupled cavity quantum electrodynamic system. In this work, we demonstrate experimentally that a single cesium atom in a cavity can be trapped by utilizing a single optical tweezer settled in cavity mode, and its lifetime is (2.60 ± 0.18) s. The experiment is carried out in a Fabry-Perot cavity, which is assembled by two concave mirrors each with a curvature radius of 100 mm, and cavity length of 335 μm. The concave surfaces are highly reflective, and the cavity has a finesse of 6.1 × 104. The 1080 nm optical tweezer with a waist of 2 μm is formed by an achromatic lens group with a numerical aperture of 0.4. At first, the precooled atomic assemble released from the magneto-optical trap (MOT) is transferred into cavity mode by an optical dipole trap with a waist of 36 μm. Then, one of the successfully transferred atoms is captured by the optical tweezer with the aid of cavity cooling mechanism. A blue detuned cavity locking laser is used as a standing-wave optical trap along the cavity axis. The signal of successfully trapped one atom is obtained by recording transmission of the cavity that will decrease owing to the strong coupling induced vacuum Rabi splitting. Finally, we demonstrate the precise manipulation of the atom-cavity coupling strength, which is achieved by scanning the position of the trapped atom step by step by using a high-precision translation stage. The system realized in this work can be used to study the dynamics of single atom-photon interactions with adjustable coupling strength. In addition, the mechanism adopted in this work is compatible with constructing tweezer arrays inside cavity mode, and thus possesses more flexibility and great potentials in cavity-based quantum entanglement and quantum simulation.

Acta Physica Sinica•Jan 1, 2023•0 citations

Novel techniques for the trapping and manipulation of ultracold atoms

N. Cooper

We describe several novel techniques for the optical trapping of ultracold atoms and for the production of wavelength-stabilised, coherent light at the frequencies required for use in atomic physics experiments. The greater part of this thesis deals with work towards the creation of regular arrays of microscopic optical dipole traps formed at the foci of truncated spherical cavities in a metallic film, in which the inter-site spacing can be set anywhere between one and several hundred micrometers. Arrays of such cavities are synthesised and structurally characterised via optical and electron microscopy, and numerical simulations of the light intensity distribution near the foci of such cavities under normal illumination are used to confirm their suitability for dipole trap production. A method for the construction of arrays of magneto-optical traps based on such structures is proposed and theoretically examined, and some preliminary experimental work towards the synthesis of the required microstructures is also described. Possible approaches to the loading of such traps and the imaging of the atoms contained therein are discussed - experimental work towards ballistic atom transfer from a specialised form of magneto-optical trap that can be formed close to a microstructured surface is carried out, and the efficacy of wavelength-selective fluorescence imaging as a means of reducing the effects of background scatter from the surface is experimentally demonstrated. Further work described herein includes the proposal and experimental demonstration of two novel techniques for the removal of the carrier wave from a phase-modulated laser beam, one of which is based on a fiber-optic Mach-Zehnder interferometer that is shown to be an effective device for splitting or combining beams of nearly equal frequencies. A spontaneous-force based atom trapping mechanism that does not rely on the use of a magnetic field, but rather on spatially-dependent optical pumping between different metastable atomic states, is also proposed, and a proof of principle experiment is carried out to demonstrate the validity of the suggested mechanism. We find that this trapping scheme allows the spatial dependence of the trapping force to be tailored with a greater degree of flexibility than is usually possible with magneto-optical trapping, and that it is also capable of producing traps with stronger spring constants than are typically achievable with magneto-optical trapping under realistic experimental constraints.

•May 1, 2014•0 citations

Efficient loading of a single neutral atom into an optical microscopic tweezer

Jun He, Bei Liu, Wen-Ting Diao +3 more

A single atom in a magneto–optical trap (MOT) with trap size (hundreds of micrometers) can be transferred into an optical microscopic tweezer with a probability of ~ 100%. The ability to transfer a single atom into two traps back and forth allows us to study the loading process. The loading probability is found to be insensitive to the geometric overlap of the MOT and the tweezer. It is therefore possible to perform simultaneously loading of a single atom into all sites of the tweezer array for many qubits. In particular, we present a simulation of the one-dimensional and two-dimensional arrays of an optical microscopic tweezer. We find the same qualitative behavior for all of the trap parameters.

Chinese Physics B•Mar 31, 2015•2 citations

Loading atoms from a large magnetic trap to a small intra-cavity optical lattice

D. Varga, B. Gábor, Bálint Sárközi +7 more

We show that an optimized loading of a cold ensemble of rubidium-87 atoms from a magnetic trap into an optical lattice sustained by a single, far-red-detuned mode of a high-Q optical cavity can be efficient despite the large volume mismatch of the traps. The magnetically trapped atoms are magnetically transported to the vicinity of the cavity mode and released from the magnetic trap in a controlled way meanwhile undergoing an evaporation period. Large number of atoms get trapped in the dipole potential of the cavity mode for several hundreds of milliseconds. We monitor the number of atoms in the mode volume by a second tone of the cavity close to the atomic resonance. While this probe tone can pump atoms to another ground state uncoupled to the probe, we demonstrate state-independent trapping by applying a repumper laser.

arXiv:2310.04199•Physics Letters A•Mar 20, 2024•4 citations

Manipulation of ultracold atoms using magnetic and optical fields

Matthew J Pritchard

The loading and guiding of a launched cloud of cold atoms with the optical dipole force are theoretically and numerically modelled. A far-off resonance trap can be realised using a high power Gaussian mode laser, red-detuned with respect to the principal atomic resonance (Rb 5s-5p). The optimum strategy for loading typically 30% of the atoms from a Magneto optical trap and guiding them vertically through 22 cm is discussed. During the transport the radial size of the cloud is confined to a few hundred microns, whereas the unconfined axial size grows to be approximately 1 cm. It is proposed that the cloud can be focused in three dimensions at the apex of the motion by using a single magnetic impulse to achieve axial focusing. A theoretical study of six current-carrying coil and bar arrangements that generate magnetic lenses is made. An investigation of focusing aberrations show that, for typical experimental parameters, the widely used assumption of a purely harmonic lens is often inaccurate. A new focusing regime is discussed: isotropic 3D focusing of atoms with a single magnetic lens. The baseball lens offers the best possibility for isotropically focusing a cloud of weak-field-seeking atoms in 3D.A pair of magnetic lens pulses can also be used to create a 3D focus (the alternate-gradient method). The two possible pulse sequences are discussed and it is found that they are ideal for loading both 'pancake' and 'sausage’ shaped magnetic/optical microtraps. It is shown that focusing aberrations are considerably smaller for double-impulse magnetic lenses compared to single- impulse magnetic lenses. The thesis concludes by describing the steps taken towards creating a 3D quasi- electrostatic lattice for 85Ilb， using a CՕշ laser. The resulting lattice of trapped atoms will have a low decoherence, and with resolvable lattice sites, it therefore provides a useful system to implement quantum information processing.

•Jan 1, 2006•3 citations
In most experiments with atoms trapped in optical lattices, the transverse size of the optical lattice beams is of the order of tens of micrometers, and loading many atoms into smaller optical lattices has not been carefully investigated. We report trapping 1500 171Yb^{171}\mathrm{Yb}171Yb atoms in a one-dimensional optical lattice generated by a narrow cavity mode at a distance of 0.14 mm from a mirror surface. The simplest approach of loading atoms from a mirror magneto-optical trap overlapped with the cavity mode allows the adjustment of the loading position by tuning a uniform bias magnetic field. The number of atoms trapped in the optical lattice exhibits two local maxima for different lattice depths, with a global maximum in the deeper lattice. These results open a way to quantum mechanical manipulation of atoms based on strong interaction with a tightly focused light field.
Controlling atoms by light is important for investigating the atom-atom entanglement and atom-atom dipole interaction.It is also a key issue for quantum information.Based on our present experimental system,we propose a scheme of generating adjustable multiple optical dipole traps by using three strongly focused beams,which implies controllable optical lattice for atom manipulation.We discuss in detail the influence of the incident angle and the phase difference on the depth and position of the traps and demonstrate that the manipulation of individual atom and control of trap-trap distance are realizable.It is of great importance in studying interaction between BECs in optical lattices,atom interference and atomic dipole-dipole interaction.
Cavity quantum electrodynamic system with strongly coupled single atoms provides a good platform for studying quantum information processing, quantum simulation, quantum network, and distributed quantum computing. Cooling and trapping single atoms is a crucial technique in the quantum technology. At present, in a high-finesse cavity with finite space, cooling and trapping single atoms is a big challenge, even though it is a mature technique for free space. Great efforts have been made to cool and trap single atoms inside a cavity, and for a trapped atom its lifetime has reached as long as tens of seconds. Developing a more flexible method of cooling and trapping single atoms in a cavity is still essential for a strongly coupled cavity quantum electrodynamic system. In this work, we demonstrate experimentally that a single cesium atom in a cavity can be trapped by utilizing a single optical tweezer settled in cavity mode, and its lifetime is (2.60 ± 0.18) s. The experiment is carried out in a Fabry-Perot cavity, which is assembled by two concave mirrors each with a curvature radius of 100 mm, and cavity length of 335 μm. The concave surfaces are highly reflective, and the cavity has a finesse of 6.1 × 104. The 1080 nm optical tweezer with a waist of 2 μm is formed by an achromatic lens group with a numerical aperture of 0.4. At first, the precooled atomic assemble released from the magneto-optical trap (MOT) is transferred into cavity mode by an optical dipole trap with a waist of 36 μm. Then, one of the successfully transferred atoms is captured by the optical tweezer with the aid of cavity cooling mechanism. A blue detuned cavity locking laser is used as a standing-wave optical trap along the cavity axis. The signal of successfully trapped one atom is obtained by recording transmission of the cavity that will decrease owing to the strong coupling induced vacuum Rabi splitting. Finally, we demonstrate the precise manipulation of the atom-cavity coupling strength, which is achieved by scanning the position of the trapped atom step by step by using a high-precision translation stage. The system realized in this work can be used to study the dynamics of single atom-photon interactions with adjustable coupling strength. In addition, the mechanism adopted in this work is compatible with constructing tweezer arrays inside cavity mode, and thus possesses more flexibility and great potentials in cavity-based quantum entanglement and quantum simulation.
We describe several novel techniques for the optical trapping of ultracold atoms and for the production of wavelength-stabilised, coherent light at the frequencies required for use in atomic physics experiments. The greater part of this thesis deals with work towards the creation of regular arrays of microscopic optical dipole traps formed at the foci of truncated spherical cavities in a metallic film, in which the inter-site spacing can be set anywhere between one and several hundred micrometers. Arrays of such cavities are synthesised and structurally characterised via optical and electron microscopy, and numerical simulations of the light intensity distribution near the foci of such cavities under normal illumination are used to confirm their suitability for dipole trap production. A method for the construction of arrays of magneto-optical traps based on such structures is proposed and theoretically examined, and some preliminary experimental work towards the synthesis of the required microstructures is also described. Possible approaches to the loading of such traps and the imaging of the atoms contained therein are discussed - experimental work towards ballistic atom transfer from a specialised form of magneto-optical trap that can be formed close to a microstructured surface is carried out, and the efficacy of wavelength-selective fluorescence imaging as a means of reducing the effects of background scatter from the surface is experimentally demonstrated. Further work described herein includes the proposal and experimental demonstration of two novel techniques for the removal of the carrier wave from a phase-modulated laser beam, one of which is based on a fiber-optic Mach-Zehnder interferometer that is shown to be an effective device for splitting or combining beams of nearly equal frequencies. A spontaneous-force based atom trapping mechanism that does not rely on the use of a magnetic field, but rather on spatially-dependent optical pumping between different metastable atomic states, is also proposed, and a proof of principle experiment is carried out to demonstrate the validity of the suggested mechanism. We find that this trapping scheme allows the spatial dependence of the trapping force to be tailored with a greater degree of flexibility than is usually possible with magneto-optical trapping, and that it is also capable of producing traps with stronger spring constants than are typically achievable with magneto-optical trapping under realistic experimental constraints.
A single atom in a magneto–optical trap (MOT) with trap size (hundreds of micrometers) can be transferred into an optical microscopic tweezer with a probability of ~ 100%. The ability to transfer a single atom into two traps back and forth allows us to study the loading process. The loading probability is found to be insensitive to the geometric overlap of the MOT and the tweezer. It is therefore possible to perform simultaneously loading of a single atom into all sites of the tweezer array for many qubits. In particular, we present a simulation of the one-dimensional and two-dimensional arrays of an optical microscopic tweezer. We find the same qualitative behavior for all of the trap parameters.
We show that an optimized loading of a cold ensemble of rubidium-87 atoms from a magnetic trap into an optical lattice sustained by a single, far-red-detuned mode of a high-Q optical cavity can be efficient despite the large volume mismatch of the traps. The magnetically trapped atoms are magnetically transported to the vicinity of the cavity mode and released from the magnetic trap in a controlled way meanwhile undergoing an evaporation period. Large number of atoms get trapped in the dipole potential of the cavity mode for several hundreds of milliseconds. We monitor the number of atoms in the mode volume by a second tone of the cavity close to the atomic resonance. While this probe tone can pump atoms to another ground state uncoupled to the probe, we demonstrate state-independent trapping by applying a repumper laser.
The loading and guiding of a launched cloud of cold atoms with the optical dipole force are theoretically and numerically modelled. A far-off resonance trap can be realised using a high power Gaussian mode laser, red-detuned with respect to the principal atomic resonance (Rb 5s-5p). The optimum strategy for loading typically 30% of the atoms from a Magneto optical trap and guiding them vertically through 22 cm is discussed. During the transport the radial size of the cloud is confined to a few hundred microns, whereas the unconfined axial size grows to be approximately 1 cm. It is proposed that the cloud can be focused in three dimensions at the apex of the motion by using a single magnetic impulse to achieve axial focusing. A theoretical study of six current-carrying coil and bar arrangements that generate magnetic lenses is made. An investigation of focusing aberrations show that, for typical experimental parameters, the widely used assumption of a purely harmonic lens is often inaccurate. A new focusing regime is discussed: isotropic 3D focusing of atoms with a single magnetic lens. The baseball lens offers the best possibility for isotropically focusing a cloud of weak-field-seeking atoms in 3D.A pair of magnetic lens pulses can also be used to create a 3D focus (the alternate-gradient method). The two possible pulse sequences are discussed and it is found that they are ideal for loading both 'pancake' and 'sausage’ shaped magnetic/optical microtraps. It is shown that focusing aberrations are considerably smaller for double-impulse magnetic lenses compared to single- impulse magnetic lenses. The thesis concludes by describing the steps taken towards creating a 3D quasi- electrostatic lattice for 85Ilb， using a CՕշ laser. The resulting lattice of trapped atoms will have a low decoherence, and with resolvable lattice sites, it therefore provides a useful system to implement quantum information processing.