Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2001.05765 · Mathematics of Computation

On quasi-Monte Carlo methods in weighted ANOVA spaces

Peter Kritzer, Friedrich Pillichshammer, G.W. Wasilkowski

Published Nov 18, 2020• 1 citation
arXivHTMLPDF

Abstract

In the present paper we study quasi-Monte Carlo rules for approximating integrals over the $d$-dimensional unit cube for functions from weighted Sobolev spaces of regularity one. While the properties of these rules are well understood for anchored Sobolev spaces, this is not the case for the ANOVA spaces, which are another very important type of reference spaces for quasi-Monte Carlo rules. Using a direct approach we provide a formula for the worst case error of quasi-Monte Carlo rules for functions from weighted ANOVA spaces. As a consequence we bound the worst case error from above in terms of weighted discrepancy of the employed integration nodes. On the other hand we also obtain a general lower bound in terms of the number $n$ of used integration nodes. For the one-dimensional case our results lead to the optimal integration rule and also in the two-dimensional case we provide rules yielding optimal convergence rates.

DOI
10.1090/mcom/3598

Related papers

Constructive approaches to quasi-Monte Carlo methods for multiple integration

Frances Y. Kuo

Recently, quasi-Monte Carlo methods have been successfully used for approximating multiple integrals in hundreds of dimensions in mathematical finance, and were significantly more efficient than Monte Carlo methods. To understand the apparent success of quasi-Monte Carlo methods for multiple integration, one popular approach is to study worst-case error bounds in weighted function spaces in which the importance of the variables is moderated by some sequences of weights. Ideally, a family of quasi-Monte Carlo methods in some weighted function space should be strongly tractable. Strong tractability means that the minimal number of quadrature points n needed to reduce the initial error by a factor of ε is bounded by a polynomial in ε⁻¹ independently of the dimension d. Several recent publications show the existence of lattice rules that satisfy the strong tractability error bounds in weighted Korobov spaces of periodic integrands and weighted Sobolev spaces of non-periodic integrands. However, those results were non-constructive and thus give no clues as to how to actually construct these lattice rules. In this thesis, we focus on the construction of quasi-Monte Carlo methods that are strongly tractable. We develop and justify algorithms for the construction of lattice rules that achieve strong tractability error bounds in weighted Korobov and Sobolev spaces. The parameters characterizing these lattice rules are found ‘component-by-component’: the (d + 1)-th components are obtained by successive 1-dimensional searches, with the previous d components kept unchanged. The cost of these algorithms vary from O(nd²) to O(n³d²) operations. With currently available technology, they allow construction of rules easily with values of n up to several million and dimensions d up to several hundred.

•Jan 1, 2002•2 citations

Open type quasi-Monte Carlo integration based on Halton sequences in weighted Sobolev spaces

Peter Hellekalek, Peter Kritzer, Friedrich Pillichshammer

In this paper, we study quasi-Monte Carlo (QMC) integration in weighted Sobolev spaces. In contrast to many previous results the QMC algorithms considered here are of open type, i.e., they are extensible in the number of sample points without having to discard the samples already used. As the underlying integration nodes we consider randomized Halton sequences in prime bases $\boldsymbol{p}=(p_1,...,p_s)$ for which we study the root mean square (RMS) worst-case error. The randomization method is a $\boldsymbol{p}$-adic shift which is based on $\boldsymbol{p}$-adic arithmetic. The obtained error bounds are optimal in the order of magnitude of the number of sample nodes. Furthermore we obtain conditions on the coordinate weights under which the error bounds are independent of the dimension $s$. In terms of the field of Information-Based Complexity this means that the corresponding QMC rule achieves a strong polynomial tractability error bound. Our findings on the RMS worst-case error of randomized Halton sequences can be carried over to the RMS $L_2$-discrepancy. Except for the $\boldsymbol{p}$-adic shift our results are fully constructive and no search algorithms (such as the component-by-component algorithm) are required.

arXiv:1411.3823•Nov 14, 2014•0 citations

Construction of lattice rules for multiple integration based on a weighted discrepancy

Vasile Sinescu

High-dimensional integrals arise in a variety of areas, including quantum physics, the physics and chemistry of molecules, statistical mechanics and more recently, in financial applications. In order to approximate multidimensional integrals, one may use Monte Carlo methods in which the quadrature points are generated randomly or quasi-Monte Carlo methods, in which points are generated deterministically. One particular class of quasi-Monte Carlo methods for multivariate integration is represented by lattice rules. Lattice rules constructed throughout this thesis allow good approximations to integrals of functions belonging to certain weighted function spaces. These function spaces were proposed as an explanation as to why integrals in many variables appear to be successfully approximated although the standard theory indicates that the number of quadrature points required for reasonable accuracy would be astronomical because of the large number of variables. The purpose of this thesis is to contribute to theoretical results regarding the construction of lattice rules for multiple integration. We consider both lattice rules for integrals over the unit cube and lattice rules suitable for integrals over Euclidean space. The research reported throughout the thesis is devoted to finding the generating vector required to produce lattice rules that have what is termed a low weighted discrepancy . In simple terms, the discrepancy is a measure of the uniformity of the distribution of the quadrature points or in other settings, a worst-case error. One of the assumptions used in these weighted function spaces is that variables are arranged in the decreasing order of their importance and the assignment of weights in this situation results in so-called product weights . In other applications it is rather the importance of group of variables that matters. This situation is modelled by using function spaces in which the weights are general . In the weighted settings mentioned above, the quality of the lattice rules is assessed by the weighted discrepancy mentioned earlier. Under appropriate conditions on the weights, the lattice rules constructed here produce a convergence rate of the error that ranges from O(n−1/2) to the (believed) optimal O(n−1+δ) for any δ gt 0, with the involved constant independent of the dimension.

•Jan 1, 2008•0 citations

High-dimensional integration: The quasi-Monte Carlo way

Josef Dick, Frances Y. Kuo, Ian H. Sloan

This paper is a contemporary review of QMC (‘quasi-Monte Carlo’) methods, that is, equal-weight rules for the approximate evaluation of high-dimensional integrals over the unit cube [0,1] s , where s may be large, or even infinite. After a general introduction, the paper surveys recent developments in lattice methods, digital nets, and related themes. Among those recent developments are methods of construction of both lattices and digital nets, to yield QMC rules that have a prescribed rate of convergence for sufficiently smooth functions, and ideally also guaranteed slow growth (or no growth) of the worst-case error as s increases. A crucial role is played by parameters called ‘weights’, since a careful use of the weight parameters is needed to ensure that the worst-case errors in an appropriately weighted function space are bounded, or grow only slowly, as the dimension s increases. Important tools for the analysis are weighted function spaces, reproducing kernel Hilbert spaces, and discrepancy, all of which are discussed with an appropriate level of detail.

Acta Numerica•Apr 2, 2013•615 citations

A Universal Median Quasi-Monte Carlo Integration

Takashi Goda, Kosuke Suzuki, Makoto Matsumoto

Abstract. We study quasi-Monte Carlo (QMC) integration over the multidimensional unit cube in several weighted function spaces with different smoothness classes. We consider approximating the integral of a function by the median of several integral estimates under independent and random choices of the underlying QMC point sets (either linearly scrambled digital nets or infinite-precision polynomial lattice point sets). Even though our approach does not require any information on the smoothness and weights of a target function space as an input, we can prove a probabilistic upper bound on the worst-case error for the respective weighted function space, where the failure probability converges to 0 exponentially fast as the number of estimates increases. Our obtained rates of convergence are nearly optimal for function spaces with finite smoothness, and we can attain a dimension-independent super-polynomial convergence for a class of infinitely differentiable functions. This implies that our median-based QMC rule is universal in the sense that it does not need to be adjusted to the smoothness and the weights of the function spaces and yet exhibits the nearly optimal rate of convergence. Numerical experiments support our theoretical results.

arXiv:2209.13186•SIAM Journal on Numerical Analysis•Feb 16, 2024•12 citations

Construction-Free Median Quasi-Monte Carlo Rules for Function Spaces with Unspecified Smoothness and General Weights

Takashi Goda, Pierre L’Ecuyer

We study quasi-Monte Carlo (QMC) integration of smooth functions defined over the multidimensional unit cube. Inspired by a recent work of Pan and Owen, we study a new construction-free median QMC rule which can exploit the smoothness and the weights of function spaces adaptively. For weighted Korobov spaces, we draw a sample of $r$ independent generating vectors of rank-1 lattice rules, compute the integral estimate for each, and approximate the true integral by the median of these $r$ estimates. For weighted Sobolev spaces, we use the same approach but with the rank-1 lattice rules replaced by high-order polynomial lattice rules. A major advantage over the existing approaches is that we do not need to construct good generating vectors by a computer search algorithm, while our median QMC rule achieves almost the optimal worst-case error rate for the respective function space with any smoothness and weights, with a probability that converges to 1 exponentially fast as $r$ increases. Numerical experiments illustrate and support our theoretical findings.

arXiv:2201.09413•SIAM Journal on Scientific Computing•Aug 1, 2022•25 citations
In the present paper we study quasi-Monte Carlo rules for approximating integrals over the ddd-dimensional unit cube for functions from weighted Sobolev spaces of regularity one. While the properties of these rules are well understood for anchored Sobolev spaces, this is not the case for the ANOVA spaces, which are another very important type of reference spaces for quasi-Monte Carlo rules. Using a direct approach we provide a formula for the worst case error of quasi-Monte Carlo rules for functions from weighted ANOVA spaces. As a consequence we bound the worst case error from above in terms of weighted discrepancy of the employed integration nodes. On the other hand we also obtain a general lower bound in terms of the number nnn of used integration nodes. For the one-dimensional case our results lead to the optimal integration rule and also in the two-dimensional case we provide rules yielding optimal convergence rates.
Recently, quasi-Monte Carlo methods have been successfully used for approximating multiple integrals in hundreds of dimensions in mathematical finance, and were significantly more efficient than Monte Carlo methods. To understand the apparent success of quasi-Monte Carlo methods for multiple integration, one popular approach is to study worst-case error bounds in weighted function spaces in which the importance of the variables is moderated by some sequences of weights. Ideally, a family of quasi-Monte Carlo methods in some weighted function space should be strongly tractable. Strong tractability means that the minimal number of quadrature points n needed to reduce the initial error by a factor of ε is bounded by a polynomial in ε⁻¹ independently of the dimension d. Several recent publications show the existence of lattice rules that satisfy the strong tractability error bounds in weighted Korobov spaces of periodic integrands and weighted Sobolev spaces of non-periodic integrands. However, those results were non-constructive and thus give no clues as to how to actually construct these lattice rules. In this thesis, we focus on the construction of quasi-Monte Carlo methods that are strongly tractable. We develop and justify algorithms for the construction of lattice rules that achieve strong tractability error bounds in weighted Korobov and Sobolev spaces. The parameters characterizing these lattice rules are found ‘component-by-component’: the (d + 1)-th components are obtained by successive 1-dimensional searches, with the previous d components kept unchanged. The cost of these algorithms vary from O(nd²) to O(n³d²) operations. With currently available technology, they allow construction of rules easily with values of n up to several million and dimensions d up to several hundred.
In this paper, we study quasi-Monte Carlo (QMC) integration in weighted Sobolev spaces. In contrast to many previous results the QMC algorithms considered here are of open type, i.e., they are extensible in the number of sample points without having to discard the samples already used. As the underlying integration nodes we consider randomized Halton sequences in prime bases p=(p1,...,ps)\boldsymbol{p}=(p_1,...,p_s)p=(p1​,...,ps​) for which we study the root mean square (RMS) worst-case error. The randomization method is a p\boldsymbol{p}p-adic shift which is based on p\boldsymbol{p}p-adic arithmetic. The obtained error bounds are optimal in the order of magnitude of the number of sample nodes. Furthermore we obtain conditions on the coordinate weights under which the error bounds are independent of the dimension sss. In terms of the field of Information-Based Complexity this means that the corresponding QMC rule achieves a strong polynomial tractability error bound. Our findings on the RMS worst-case error of randomized Halton sequences can be carried over to the RMS L2L_2L2​-discrepancy. Except for the p\boldsymbol{p}p-adic shift our results are fully constructive and no search algorithms (such as the component-by-component algorithm) are required.
High-dimensional integrals arise in a variety of areas, including quantum physics, the physics and chemistry of molecules, statistical mechanics and more recently, in financial applications. In order to approximate multidimensional integrals, one may use Monte Carlo methods in which the quadrature points are generated randomly or quasi-Monte Carlo methods, in which points are generated deterministically. One particular class of quasi-Monte Carlo methods for multivariate integration is represented by lattice rules. Lattice rules constructed throughout this thesis allow good approximations to integrals of functions belonging to certain weighted function spaces. These function spaces were proposed as an explanation as to why integrals in many variables appear to be successfully approximated although the standard theory indicates that the number of quadrature points required for reasonable accuracy would be astronomical because of the large number of variables. The purpose of this thesis is to contribute to theoretical results regarding the construction of lattice rules for multiple integration. We consider both lattice rules for integrals over the unit cube and lattice rules suitable for integrals over Euclidean space. The research reported throughout the thesis is devoted to finding the generating vector required to produce lattice rules that have what is termed a low weighted discrepancy . In simple terms, the discrepancy is a measure of the uniformity of the distribution of the quadrature points or in other settings, a worst-case error. One of the assumptions used in these weighted function spaces is that variables are arranged in the decreasing order of their importance and the assignment of weights in this situation results in so-called product weights . In other applications it is rather the importance of group of variables that matters. This situation is modelled by using function spaces in which the weights are general . In the weighted settings mentioned above, the quality of the lattice rules is assessed by the weighted discrepancy mentioned earlier. Under appropriate conditions on the weights, the lattice rules constructed here produce a convergence rate of the error that ranges from O(n−1/2) to the (believed) optimal O(n−1+δ) for any δ gt 0, with the involved constant independent of the dimension.
This paper is a contemporary review of QMC (‘quasi-Monte Carlo’) methods, that is, equal-weight rules for the approximate evaluation of high-dimensional integrals over the unit cube [0,1] s , where s may be large, or even infinite. After a general introduction, the paper surveys recent developments in lattice methods, digital nets, and related themes. Among those recent developments are methods of construction of both lattices and digital nets, to yield QMC rules that have a prescribed rate of convergence for sufficiently smooth functions, and ideally also guaranteed slow growth (or no growth) of the worst-case error as s increases. A crucial role is played by parameters called ‘weights’, since a careful use of the weight parameters is needed to ensure that the worst-case errors in an appropriately weighted function space are bounded, or grow only slowly, as the dimension s increases. Important tools for the analysis are weighted function spaces, reproducing kernel Hilbert spaces, and discrepancy, all of which are discussed with an appropriate level of detail.
Abstract. We study quasi-Monte Carlo (QMC) integration over the multidimensional unit cube in several weighted function spaces with different smoothness classes. We consider approximating the integral of a function by the median of several integral estimates under independent and random choices of the underlying QMC point sets (either linearly scrambled digital nets or infinite-precision polynomial lattice point sets). Even though our approach does not require any information on the smoothness and weights of a target function space as an input, we can prove a probabilistic upper bound on the worst-case error for the respective weighted function space, where the failure probability converges to 0 exponentially fast as the number of estimates increases. Our obtained rates of convergence are nearly optimal for function spaces with finite smoothness, and we can attain a dimension-independent super-polynomial convergence for a class of infinitely differentiable functions. This implies that our median-based QMC rule is universal in the sense that it does not need to be adjusted to the smoothness and the weights of the function spaces and yet exhibits the nearly optimal rate of convergence. Numerical experiments support our theoretical results.
We study quasi-Monte Carlo (QMC) integration of smooth functions defined over the multidimensional unit cube. Inspired by a recent work of Pan and Owen, we study a new construction-free median QMC rule which can exploit the smoothness and the weights of function spaces adaptively. For weighted Korobov spaces, we draw a sample of rrr independent generating vectors of rank-1 lattice rules, compute the integral estimate for each, and approximate the true integral by the median of these rrr estimates. For weighted Sobolev spaces, we use the same approach but with the rank-1 lattice rules replaced by high-order polynomial lattice rules. A major advantage over the existing approaches is that we do not need to construct good generating vectors by a computer search algorithm, while our median QMC rule achieves almost the optimal worst-case error rate for the respective function space with any smoothness and weights, with a probability that converges to 1 exponentially fast as rrr increases. Numerical experiments illustrate and support our theoretical findings.